P3497 Cylinder Deactivation System Bank 2
What it means
The system that shuts off some cylinders to save fuel while cruising is not working correctly on bank 2 of the engine. The computer usually turns the feature off until it is fixed.
Can I keep driving?
Usually drivable while you get it checked soon. Check the oil level, since low oil is a common cause. If the engine misfires, runs rough, the check engine light flashes or the oil pressure light comes on, stop driving and get it checked.
What to test before replacing parts
Check oil level, condition and pressure, then test the bank 2 cylinder deactivation solenoids and wiring and check for lifter faults before replacing parts.
- Check the oil level and make sure the correct oil is used
- Look for other cylinder deactivation or misfire codes
- Check the oil pressure switch and solenoid operation with a scan tool
Signs you may notice
- Check engine light on
- Lower fuel economy
- Rough running or misfire in some cases
- ECO or fuel-saving indicator may stop coming on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonEngine oil low, dirty or the wrong thickness
- CommonFaulty cylinder deactivation oil pressure switch or sensor
- CommonSticking cylinder deactivation solenoid or clogged screen
- CommonWiring or connector fault at the solenoids
- PossibleStuck deactivating lifters or rocker arms
- PossibleEngine computer fault (rare)
Typical repair once the cause is confirmed
Often fixed with an oil change to the correct oil; otherwise replace the oil pressure switch or deactivation solenoid.
Where it shows up
- Seen on Honda V6 engines with Variable Cylinder Management, such as the Odyssey and Pilot
Common questions
What does P3497 mean?
The system that shuts off some cylinders to save fuel while cruising is not working correctly on bank 2 of the engine. The computer usually turns the feature off until it is fixed.
Can I drive with code P3497?
Usually drivable while you get it checked soon. Check the oil level, since low oil is a common cause. If the engine misfires, runs rough, the check engine light flashes or the oil pressure light comes on, stop driving and get it checked.
What causes P3497?
Common possibilities to test include: engine oil low, dirty or the wrong thickness; faulty cylinder deactivation oil pressure switch or sensor; sticking cylinder deactivation solenoid or clogged screen; wiring or connector fault at the solenoids. A shop should confirm the cause before replacing parts.