Home › Code lookup › U0222
Network code · Network

U0222 Lost Communication With Door Window Motor "A"

How urgent? Book a check when convenient

What it means

Other computers in the car have stopped hearing from the power window motor "A". It runs a comfort or convenience feature.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Test the battery and charging voltage first
  2. Check the fuses, power and ground for the power window motor "A"
  3. See which modules answer a scan tool to narrow down the break
  4. Inspect network wiring and connectors near the module

Signs you may notice

  • The feature that module controls may not work
  • Other modules may set related codes

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThe power window motor "A" lost power or ground (blown fuse or bad ground)
  • CommonDamaged, corroded or loose network wiring or connector
  • CommonWeak battery or low system voltage
  • PossibleFailed power window motor "A"
  • PossibleAnother module shorting out the network

Typical repair once the cause is confirmed

Restore power, ground or wiring to the power window motor "A"; replace the module only after those test good.

Walk through it step by step: Windows, locks or radio stopped working →

Common questions

What does U0222 mean?

Other computers in the car have stopped hearing from the power window motor "A". It runs a comfort or convenience feature.

Can I drive with code U0222?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0222?

Common possibilities to test include: the power window motor "a" lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed power window motor "a". A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.