U0246 Lost Communication With Seat Control Module "E"
What it means
Other computers in the car have stopped hearing from the power seat module "E". It runs a comfort or convenience feature.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the power seat module "E"
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- The feature that module controls may not work
- Other modules may set related codes
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe power seat module "E" lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed power seat module "E"
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the power seat module "E"; replace the module only after those test good.
Common questions
What does U0246 mean?
Other computers in the car have stopped hearing from the power seat module "E". It runs a comfort or convenience feature.
Can I drive with code U0246?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0246?
Common possibilities to test include: the power seat module "e" lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed power seat module "e". A shop should confirm the cause before replacing parts.