U0251 Lost Communication With Running Board Control Module "B"
What it means
Other computers in the car have stopped hearing from the power running board module "B". It runs a comfort or convenience feature.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the power running board module "B"
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- The feature that module controls may not work
- Other modules may set related codes
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe power running board module "B" lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed power running board module "B"
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the power running board module "B"; replace the module only after those test good.
Common questions
What does U0251 mean?
Other computers in the car have stopped hearing from the power running board module "B". It runs a comfort or convenience feature.
Can I drive with code U0251?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0251?
Common possibilities to test include: the power running board module "b" lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed power running board module "b". A shop should confirm the cause before replacing parts.