Home › Code lookup › U0258
Network code · Network

U0258 Lost Communication With Radio Transceiver

How urgent? Book a check when convenient

What it means

Other computers in the car have stopped hearing from the radio transceiver module. It handles phone, connected services or emergency calling.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Test the battery and charging voltage first
  2. Check the fuses, power and ground for the radio transceiver module
  3. See which modules answer a scan tool to narrow down the break
  4. Inspect network wiring and connectors near the module

Signs you may notice

  • Hands-free calling or connected services may not work
  • Other modules may set related codes

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThe radio transceiver module lost power or ground (blown fuse or bad ground)
  • CommonDamaged, corroded or loose network wiring or connector
  • CommonWeak battery or low system voltage
  • PossibleFailed radio transceiver module
  • PossibleAnother module shorting out the network

Typical repair once the cause is confirmed

Restore power, ground or wiring to the radio transceiver module; replace the module only after those test good.

Common questions

What does U0258 mean?

Other computers in the car have stopped hearing from the radio transceiver module. It handles phone, connected services or emergency calling.

Can I drive with code U0258?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0258?

Common possibilities to test include: the radio transceiver module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed radio transceiver module. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.