Why is my red brake warning light on?
The red BRAKE light (often the word BRAKE or an exclamation mark in a circle) is one of the most important lights on the dash. Sometimes it's just the parking brake, but it can also mean low brake fluid or a fault in the braking system. A few quick checks help narrow down which, but only an inspection can confirm it.
- If the brake pedal feels soft, sinks toward the floor, or the car is slow to stop, pull over safely and don't drive on.
- If you see clear to brownish oily fluid near a wheel or under the car by the pedal area, don't drive it.
- If you smell burning or see smoke from a wheel, stop and let it cool. A brake may be stuck on.
How do the brakes feel and how is the car stopping?
A healthy pedal feels firm and stops well above the floor. If the car is parked, start the engine and press the pedal firmly for about 10 seconds.
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
The brakes may be losing pressure. This is a safety problemStop — don't drive it
What to do now: Don't drive it. Have the car towed or have a mobile mechanic inspect the brakes where it is.
Why: A red brake light with a soft or sinking pedal usually means the hydraulic system can't build normal pressure. That often comes from a fluid leak or a master cylinder problem, and braking can get worse without warning.
Possible causes: Brake fluid leak; Master cylinder problem; Air in the brake lines.
A shop will usually test: Brake system leak inspection; Master cylinder test; Brake line and hose inspection; Brake bleed.
Often this is a parking brake that isn't fully releasedSafe to check yourself first
What to do now: Release the parking brake all the way. Push a lever fully down, press a foot pedal to release it, or press the electric button with your foot on the brake. Then check that the light goes out.
Why: The same red light shows when the parking brake is on, and a lever pulled up just one click can be enough to turn it on. It's the most common reason for this light and the simplest to fix.
Possible causes: Parking brake partly applied; Parking brake switch sticking; Low brake fluid.
A shop will usually test: Parking brake switch check; Parking brake adjustment.
The electric parking brake may have a faultGet it checked in the next few days
What to do now: Get the electric parking brake checked within a few days. When you park, use Park (or leave it in gear on a manual) and turn the wheels toward the curb on a slope.
Why: Cars with a parking brake button often flash the red brake light or show a message when the electric parking brake has a fault. The regular brakes work separately, but the parking brake may not hold the car or may not release properly, so have the whole brake system checked.
Possible causes: Parking brake motor or caliper fault; Low voltage after a battery problem; Switch or wiring fault.
A shop will usually test: Brake system code scan; Parking brake motor and wiring test; Rear brake inspection.
Brake fluid may be leaking. The brakes could failStop — don't drive it
What to do now: Don't drive it, even after topping up the fluid. Have it towed or have a mobile mechanic come to you.
Why: Low fluid plus a visible leak usually means the brake system is losing the fluid it needs to stop the car. Topping it up only hides the problem, and the leak can get worse suddenly.
Possible causes: Leaking brake hose or line; Leaking caliper or wheel cylinder; Leaking master cylinder.
A shop will usually test: Brake system leak inspection; Hose, line and caliper check; Master cylinder inspection.
Brake fluid is low with no visible leak. Get the brakes inspected before drivingStop — don't drive it
What to do now: Don't drive it until the brakes are inspected, even if the pedal feels normal. A mobile mechanic can come to you, or have it towed. Topping it up isn't a fix: low fluid can come from a leak you can't see or from badly worn pads.
Why: Brake fluid doesn't get used up. The level falls slowly as brake pads wear, so a low level can mean the pads are thin. It can also mean fluid is escaping somewhere that's hard to see, such as inside a wheel or at the back of the engine bay. A website can't tell those apart, so it's safest to have it checked before the car is used.
Possible causes: Worn brake pads; Slow leak; Master cylinder seals leaking.
A shop will usually test: Brake pad and rotor inspection; Brake system leak check; Brake fluid condition test.
Brake and ABS lights together mean brake balance may be offStop — don't drive it
What to do now: Don't drive it. Have the car towed or call a mobile mechanic to read the brake codes.
Why: With fluid at a normal level, both lights on usually means the ABS system has a fault that also switches off electronic brake balance. That system keeps the rear wheels from locking in a hard stop. Without it, the car can skid or spin.
Possible causes: Wheel speed sensor fault; ABS module or pump fault; Low voltage after a battery problem.
A shop will usually test: ABS and brake system code scan; Wheel speed sensor data; ABS module and pump check.
A fluid level sensor or parking brake switch may be giving a false signalGet it checked in the next few days
What to do now: Before you drive, press the brake pedal firmly with the engine running. If it's firm and high, have the brake system checked within a few days. If it's soft or sinks, don't drive it.
Why: With the parking brake off, fluid between the marks and a normal pedal, the light may be getting a false signal from a stuck fluid level float or a worn parking brake switch. A red brake light can also report other brake faults, so a shop should confirm the cause rather than assuming it's the switch.
Possible causes: Parking brake switch sticking; Brake fluid level sensor sticking; Brake system fault that needs a scan.
A shop will usually test: Parking brake switch test; Fluid level sensor test; Brake system code scan.
Treat a red brake light as serious until it's checkedStop — don't drive it
What to do now: Don't drive it until the brake fluid and brakes are checked. If you can't check them yourself, have it towed or ask a mobile mechanic to come to you.
Why: With the parking brake off, the red light usually means low brake fluid or a brake system fault. Without knowing the fluid level, there's no safe way to rule out a problem that affects stopping.
Possible causes: Low brake fluid; Brake system or ABS fault; Faulty switch or sensor.
A shop will usually test: Brake fluid level and leak check; Brake system code scan; Brake pad inspection.
Related guides
Sources and references: Nissan · Mazda · National Highway Traffic Safety Administration (NHTSA)