Home › Symptom guides › Car shakes when braking
Shaking

Why does my car shake when I brake?

A shake or pulse when you brake often comes from the brake rotors no longer being perfectly even. That's common, but it is still a brake problem worth having checked, and a shake that comes with a soft pedal, grinding or a burning smell needs attention right away. Answer the questions below to see how urgent yours may be and what could be behind it.

Stop and get help right away if:
  • If the brake pedal feels soft, sinks toward the floor, or the red brake warning light comes on, stop driving and get help.
  • If you smell burning or see smoke from a wheel, pull over safely and let the brakes cool. Don't keep driving.
  • If you hear loud metal-on-metal grinding when braking, stop driving it. Your brakes may be worn through.
Question 1

Besides the shaking, do any of these happen?

These are signs the brakes themselves aren't working properly, which matters more than the shake.

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

The braking system may be failing. Don't drive itStop — don't drive it

What to do now: Park the car and have it towed to a shop, or have a mobile mechanic come to you.

Why: A soft or sinking pedal can mean the brakes don't have enough hydraulic pressure to stop the car, and a hard pull can mean one side is braking much more than the other. Either can get worse without warning, so the car shouldn't be driven until it's inspected.

Possible causes: Brake fluid leak; Stuck or seized caliper on one side; Air in the brake lines or failing master cylinder.

A shop will usually test: Brake system inspection on a lift; Brake fluid leak check; Caliper and hose inspection; Master cylinder test.

The brake pads may be worn down to metalStop — don't drive it

What to do now: Avoid driving the car. Have it towed, or have a mobile mechanic inspect the brakes where it's parked.

Why: Grinding when braking often means the pad material is gone and metal is scraping the rotor. That can reduce braking power and quickly gouges the rotor, which causes shaking. The longer it goes, the worse and more costly the damage. A shop will measure the pads and rotors to confirm what is worn.

Possible causes: Brake pads worn down; Rock or debris caught in the brake; Rusted or damaged rotor.

A shop will usually test: Brake pad thickness measurement; Rotor inspection and thickness measurement; Caliper inspection.

A brake may be sticking and overheatingStop — don't drive it

What to do now: Pull over safely and let the brakes cool. Then have the car towed or have a mobile mechanic check it.

Why: A burning smell or one very hot wheel can mean a brake isn't releasing fully. The constant rubbing overheats the pad and rotor, which causes shaking and can fade the brakes or, in rare cases, start a fire.

Possible causes: Sticking or seized caliper; Stuck caliper slide pins; Parking brake not fully releasing.

A shop will usually test: Caliper and slide pin inspection; Brake hose check; Pad and rotor inspection.

The front brake rotors may be uneven, often called warpedGet it checked in the next few days

What to do now: If the brake pedal feels soft or sinks, the red brake warning light comes on, or you hear grinding, stop driving and have it towed. Otherwise: Have the brakes inspected within the next few days. Until then, allow extra stopping distance and avoid hard braking from high speed.

Why: When the brake rotor's surface becomes uneven, the pads grab harder on some spots than others as it spins. You feel that as a pulse in the pedal or a shake in the steering wheel, usually worst when slowing from higher speeds. It's common and fixable, but it tends to get worse, can lengthen stopping distances and wears the pads unevenly. A shop will usually measure the rotors and check the calipers before deciding on a repair.

Possible causes: Uneven rotor thickness or pad deposits; Overheated rotors; Sticking caliper.

A shop will usually test: Rotor runout and thickness measurement; Pad thickness and wear pattern check; Caliper slide inspection; Wheel lug nut torque check.

The rear rotors or brake drums may be unevenGet it checked in the next few days

What to do now: If the brake pedal feels soft or sinks, the red brake warning light comes on, or you hear grinding, stop driving and have it towed. Otherwise: Have the brakes inspected within the next few days. Mention that you feel it in the seat rather than the steering wheel. Allow extra stopping distance until then.

Why: Rear brake problems don't usually reach the steering wheel, so you feel them in the seat or the whole car instead. Rear rotors can become uneven like the fronts, and drum brakes can go slightly out of round.

Possible causes: Uneven rear rotors; Out-of-round rear brake drums; Sticking rear caliper or parking brake.

A shop will usually test: Rear rotor or drum measurement; Caliper and parking brake inspection; Rear suspension check.

Worn suspension parts or a tire problem may be making it shakeGet it checked in the next few days

What to do now: Get the front suspension, tires and brakes inspected within the next few days. Drive gently and avoid highways until then.

Why: Braking shifts the car's weight forward and puts extra load on the front suspension. Worn joints, bushings or a damaged tire that cause a mild shake normally can feel much worse when you brake, and loose steering parts are a safety risk. A shop will usually inspect the suspension, tires and brakes together to find which is responsible.

Possible causes: Worn control arm bushings or ball joints; Worn tie rod ends; Out-of-balance or damaged tire.

A shop will usually test: Front suspension and steering inspection; Tire and wheel balance check; Rotor runout measurement.

It may be related to the recent workGet it checked in the next few days

What to do now: If the brake pedal feels soft or sinks, the red brake warning light comes on, or you hear grinding, stop driving and have it towed. Otherwise: Go back to the shop that did the work within a day or two. Let them know what you feel and ask them to check the wheel lug nuts, rotors and balance. Shops want to hear about this and it's usually a quick check.

Why: Lug nuts that aren't tightened evenly can distort a rotor and cause a shake under braking. New rotors can also have a slight runout, or a tire may have lost a balance weight. These are common and a shop can check them quickly.

Possible causes: Uneven or loose lug nuts; Rotor runout or rust between the rotor and hub; Missing wheel balance weight.

A shop will usually test: Lug nut torque check; Rotor runout measurement; Wheel balance check.

Related guides

Sources and references: PowerStop · National Highway Traffic Safety Administration (NHTSA)

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.