Home › Symptom guides › Engine won't shut off
Driving & handling

Why does my engine keep running after I turn it off?

An engine that won't shut off can be anything from a normal cooling fan to a shifter that isn't quite in Park to an electrical fault that keeps the engine powered. What you see and hear right after you switch off narrows it down quickly. Answer the questions below for possible causes and the safest next step.

Stop and get help right away if:
  • If the engine won't stop in a garage, open the garage door and get everyone out. Exhaust fumes can build up quickly.
  • If the engine revs higher and higher on its own, get people away from the vehicle and call for help.
  • If the gas pedal sticks while driving, shift to Neutral, brake firmly, steer to a safe spot, then shut the engine off.
Question 1

What happens when you turn the key off or press the Start/Stop button?

"Dieseling" (also called run-on) is when an engine keeps coughing and chugging unevenly for a few seconds after you switch it off.

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

An electrical fault may be keeping the engine poweredStop — don't drive it

What to do now: Don't drive it. Put it in Park with the parking brake on, turn the key to ON and back to OFF firmly, and if it keeps running, call roadside assistance or a mobile mechanic.

Why: On a modern car, turning the key off cuts power to the fuel and ignition systems. If the engine keeps running normally, something is still feeding that power, often a worn ignition switch or a relay stuck closed. A shop will test the switch, relays and wiring to find which. Until it's fixed, you can't count on being able to shut the engine off.

Possible causes: Worn or faulty ignition switch; Stuck main or ignition relay; Wiring fault after a repair or accessory install.

A shop will usually test: Ignition switch circuit test; Relay test; Wiring inspection for aftermarket accessories.

Classic engine run-on (dieseling)Book a check when convenient

What to do now: Make sure the idle isn't set too high, and book a tune-up check when convenient.

Why: On carbureted engines, fuel can keep getting pulled in after the ignition is off. Hot carbon deposits or a high idle can then ignite it, so the engine chugs on unevenly for a few seconds. It's common on older vehicles and is often fixed with adjustments and cleaning once a shop checks the idle and timing.

Possible causes: Idle speed set too high; Carbon buildup in the engine; Failed anti-dieseling (idle stop) solenoid; Fuel octane too low or ignition timing off.

A shop will usually test: Idle speed and timing check; Anti-dieseling solenoid test; Carbon cleaning or compression test.

Overheating may be making the engine run onStop — don't drive it

What to do now: Switch the engine off, let it cool completely, and don't drive it until the overheating is fixed. Have it towed or call a mobile mechanic.

Why: An overheating engine has hot spots that can ignite fuel even after the ignition is off. The run-on is a symptom; the overheating is the bigger danger, and it can warp or crack engine parts.

Possible causes: Low coolant or a cooling system leak; Failed cooling fan, thermostat or water pump; Ignition timing or mixture problem.

A shop will usually test: Cooling system pressure test; Thermostat, fan and water pump check; Ignition timing check.

A shake at shutdown on a modern car often points to engine mountsBook a check when convenient

What to do now: Book a check when convenient and mention exactly when the shake happens.

Why: Fuel-injected engines cut fuel the moment you switch off, so true run-on is rare. What feels like run-on is often the engine rocking as it stops, which worn mounts let you feel more. Less often, a leaking injector lets fuel in after shutdown. A shop will usually inspect the mounts and check for codes before deciding.

Possible causes: Worn engine or transmission mounts; Leaking fuel injector; Heavy carbon buildup.

A shop will usually test: Engine mount inspection; Code scan; Fuel injector leak-down test.

The car doesn't think it's in ParkSafe to check yourself first

What to do now: With your foot on the brake, move the shifter out of Park and firmly back into Park, then press the button again.

Why: Most push-button cars won't fully shut down unless they detect the shifter in Park. A worn switch in the shifter, or something like a coin or spilled drink in the shifter, can stop it from registering Park.

Possible causes: Worn or faulty Park position switch in the shifter; Debris or a spill in the shifter; Shift cable out of adjustment.

A shop will usually test: Park switch test; Shift cable adjustment check; Check for open recalls or service bulletins.

The Start/Stop button or keyless system isn't respondingBook a check when convenient

What to do now: Press and hold the Start/Stop button for a few seconds. That shuts off most cars even when a quick press doesn't. Book a check when convenient.

Why: Push-button systems use a switch and a computer to decide when to shut down. A sticky button, a weak fob battery or a module fault can stop a short press from working, while a long press often overrides it.

Possible causes: Worn or sticky Start/Stop button; Weak key fob battery; Keyless ignition module fault.

A shop will usually test: Code scan of the keyless system; Start/Stop switch test; Check for software updates or service bulletins.

This sounds like the cooling fan or a pump finishing its jobSafe to check yourself first

What to do now: Wait up to several minutes. On many cars the radiator fan or an electric coolant pump runs after shutdown to cool the engine, then turns off by itself.

Why: Fans and some pumps are controlled separately from the engine and can keep running after a hot drive, especially in warm weather or after towing. This is normal on many cars. A tachometer reading of zero and no exhaust from the tailpipe confirm the engine itself is off.

Possible causes: Normal after-run cooling; Stuck fan relay or temperature sensor fault; Engine running hot.

A shop will usually test: Cooling fan relay test; Coolant temperature sensor check.

This may be a diesel engine runaway, which is an emergencyStop — don't drive it

What to do now: Get everyone away from the vehicle. If it's a manual and you can do it safely, hold the brakes hard, put it in the highest gear and release the clutch to stall the engine.

Why: A diesel engine can keep running and speeding up on fuel it isn't supposed to get, most often engine oil. The key can't shut off that fuel supply, and the engine can overspeed until it fails badly.

Possible causes: Oil leaking into the intake from a failed turbocharger seal; Engine oil overfilled or crankcase vapors pulled into the intake; Fuel system or governor fault.

A shop will usually test: Turbocharger seal inspection; Oil level and crankcase ventilation check; Fuel system inspection.

Find out whether the engine is truly still runningBook a check when convenient

What to do now: After switching off, watch the tachometer and check for exhaust at the tailpipe. Then book a check and tell the shop what you saw.

Why: A fan running after shutdown, an engine that coughs briefly and an engine that won't stop at all have very different causes and urgency. A quick look at the gauges and the tailpipe tells them apart.

Possible causes: Normal cooling fan after-run; Engine run-on or shutdown shake; Electrical fault keeping the engine powered.

A shop will usually test: Code scan; Ignition and relay circuit check; Cooling fan check.

Related guides

Sources and references: Wikipedia · National Highway Traffic Safety Administration (NHTSA)

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.