Home › Symptom guides › Clunk over bumps
Noise

Why does my car clunk when I go over bumps?

A clunk over bumps usually comes from something worn or loose in the suspension or steering. Many causes, like a sway bar link, are less urgent, but a few, like a worn ball joint, can affect control of the car. Answer the questions below and we'll help you narrow down which it might be and how soon to act.

Stop and get help right away if:
  • If the steering suddenly feels loose, the car wanders, or a wheel looks tilted, slow down and pull over as soon as it's safe.
  • If a clunk started right after a wheel or tire was removed, check that the lug nuts are tight before driving any further.
  • If one corner of the car suddenly sits lower than the others, don't drive it.
Question 1

Along with the clunk, do you notice any of these?

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

A worn ball joint or tie rod may be affecting your steeringStop — don't drive it

What to do now: Slow down and pull over as soon as it's safe. Have the car towed or have a mobile mechanic inspect it where it is.

Why: A clunk together with loose or wandering steering can mean a joint that connects the wheel to the steering or suspension is badly worn. If one of these parts separates, you can lose control of that wheel. A shop will check each joint for play with the car lifted.

Possible causes: Worn ball joint; Worn inner or outer tie rod end; Loose or damaged steering rack mounting.

A shop will usually test: Ball joint and tie rod play check with the car lifted; Steering rack mount inspection; Alignment check after repair.

A suspension part may have brokenStop — don't drive it

What to do now: Don't drive it. Have it towed, and keep it on flat ground until then.

Why: A corner that suddenly sits low, or a wheel that's tilted, can mean something that holds the wheel in place has broken or come apart. A clunk is often the moment it happened, or the broken part moving over each bump.

Possible causes: Broken coil spring; Separated ball joint or broken control arm; Failed strut mount.

A shop will usually test: Full suspension inspection on a lift; Spring, control arm and strut mount check.

A loose wheel is possible. Check the lug nuts before going any furtherStop — don't drive it

What to do now: Pull over as soon as it's safe and don't drive further until the lug nuts are checked. If you have a lug wrench, tighten each nut firmly in a star pattern. Otherwise call roadside assistance or the shop that did the work.

Why: A clunk or wobble that starts right after a wheel was off can mean the lug nuts have loosened, or a brake caliper or bracket bolt is loose. Lug nuts can settle over the first few dozen miles, which is why many shops recommend a re-check, and a loose wheel can come off.

Possible causes: Loose lug nuts; Loose brake caliper or bracket; Damaged wheel studs.

A shop will usually test: Lug nut torque check; Wheel stud inspection; Brake caliper bolt check.

Possibly a worn sway bar link or bushingBook a check when convenient

What to do now: Book a suspension check. Mention that the knock is on small bumps and rough roads at low speed.

Why: Sway bar links connect the anti-roll bar to the suspension. Their small joints and rubber bushings wear out and let the bar knock on uneven pavement. It's one of the most common causes of a light clunk, but more serious parts like ball joints can sound similar, so an inspection is the way to rule them out.

Possible causes: Worn sway bar end link; Worn sway bar bushings; Loose exhaust or heat shield.

A shop will usually test: Sway bar link and bushing inspection; Suspension inspection on a lift.

Worn shocks, struts or their mounts may be the causeBook a check when convenient

What to do now: Book a suspension check within the next week or two, and slow down for big bumps and potholes until then.

Why: Shocks and struts control how the car moves after a bump. When they wear, the suspension can hit its stops and thud, and the car bounces more. Worn strut mounts or bump stops can also clunk. Worn shocks can make stopping distances longer and the car less stable. A shop will usually inspect the shocks, mounts and bump stops before recommending which to replace.

Possible causes: Worn shocks or struts; Worn strut mount or bearing; Missing or broken bump stop.

A shop will usually test: Shock and strut inspection; Strut mount and bump stop check; Road test.

A worn ball joint or tie rod end may be the causeStop — don't drive it

What to do now: Have the front suspension and steering inspected before the car is driven further. A mobile mechanic or a tow is the safest way to get it checked.

Why: Ball joints and tie rod ends are the pivots that let the front wheels steer and move up and down. When they wear, they can clunk over bumps and especially when turning. Unlike a sway bar link, a badly worn ball joint can separate and cause a loss of control, and how worn it is can only be judged with the car lifted. A strut mount can make a similar noise, so the shop will usually check both.

Possible causes: Worn lower or upper ball joint; Worn tie rod end; Worn strut mount.

A shop will usually test: Ball joint play check with the car lifted; Tie rod end inspection; Alignment check after repair.

Worn control arm bushings may be the causeBook a check when convenient

What to do now: Book a suspension check within the next week or two.

Why: Control arms hold each wheel in position, and they mount to the car through rubber bushings. When the rubber cracks or tears, the arm can shift back and forth as you brake, accelerate and hit bumps, causing a clunk. A shop will usually check the bushings, mounts and ball joints to see which is moving.

Possible causes: Worn control arm bushings; Worn engine or transmission mount; Worn ball joint.

A shop will usually test: Control arm bushing inspection with a pry bar; Engine and transmission mount check; Alignment check after repair.

It may just be something loose in the backSafe to check yourself first

What to do now: Empty the trunk or cargo area, check that the spare tire and jack are clamped down tightly, then drive the same route again.

Why: A loose spare tire, jack, toolkit or items rolling around in the back can make a surprisingly suspension-like clunk over bumps. It takes a few minutes to rule out before paying for an inspection.

Possible causes: Loose spare tire or jack; Items in the trunk or a loose seat latch; Worn rear shock or link.

A shop will usually test: Rear suspension inspection if the noise continues.

A worn driveline part or mount may be clunkingBook a check when convenient

What to do now: Book a check within the next week or two and mention that it also clunks when shifting into gear or taking off.

Why: A clunk that happens both over bumps and when the drivetrain takes up power often points to something with play in it, like a universal joint on the driveshaft, a mount, or the rear axle bushings.

Possible causes: Worn universal (U) joint; Worn engine, transmission or differential mount; Worn rear axle or trailing arm bushings.

A shop will usually test: U-joint and driveshaft inspection; Engine and transmission mount check; Rear suspension bushing inspection.

Something in the suspension may be worn. A lift inspection can usually find itBook a check when convenient

What to do now: Book a suspension and steering inspection within the next week or two, and slow down for bumps until then.

Why: Many suspension parts can clunk, and they're much easier to tell apart with the car lifted and the parts pried on. Most causes are wear items, but some, like ball joints, affect steering control, so it's worth not putting it off for long.

Possible causes: Worn sway bar link; Worn shock, strut or mount; Worn ball joint or tie rod.

A shop will usually test: Suspension and steering inspection on a lift; Road test.

Related guides

Sources and references: iFixit · CarWhere

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.