Why is my engine knocking?
Engine knocking covers two very different sounds. A light pinging when you accelerate is often a fuel or carbon issue you can manage. A deep, heavy knock that follows engine speed can mean serious internal damage. Answer the questions below to tell which you have and what to do.
- If the oil pressure light comes on, pull over safely and turn the engine off right away.
- If the check engine light is flashing and the engine is shaking, slow down, pull over and stop.
- If the temperature gauge is in the red or you see steam, pull over and turn the engine off.
- Never open the radiator cap on a hot engine.
Is any of this happening along with the knock?
Warning lights on the dash change the answer a lot. Pick the most serious one that fits.
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
The engine may not be getting enough oilStop — don't drive it
What to do now: Turn the engine off and don't restart it. Have it towed, or have a mobile mechanic check it where it's parked.
Why: Oil keeps the engine's moving metal parts from touching. A knock with low oil or an oil pressure light means parts may already be hitting each other. Running it this way, even for a few minutes, can destroy the engine.
Possible causes: Low oil level; Oil pump or pickup problem; Worn engine bearings.
A shop will usually test: Oil pressure test with a gauge; Engine noise diagnosis with a stethoscope; Oil filter and drain inspection for metal particles.
The engine may be misfiring badlyStop — don't drive it
What to do now: Pull over safely and turn the engine off. Have the car towed or have a mobile mechanic come to you.
Why: A flashing check engine light usually means the engine is misfiring badly enough to cause damage. Unburned fuel can overheat and ruin the catalytic converter, and a rough-running engine can knock and shake. Driving on makes the damage worse.
Possible causes: Failed ignition coil or spark plug; Fuel injector problem; Internal engine damage.
A shop will usually test: Code scan and misfire data; Ignition coil and spark plug check; Compression test.
The engine may be overheating, which can cause knocking and damageStop — don't drive it
What to do now: Pull over safely and turn the engine off. Let it cool and have it towed or checked by a mobile mechanic.
Why: An overheating engine is far more likely to knock because the fuel ignites too early in the hot cylinders. Running it hot can warp the cylinder head or blow the head gasket.
Possible causes: Low coolant or a coolant leak; Failed fan, thermostat or water pump; Head gasket problem.
A shop will usually test: Cooling system pressure test; Fan and thermostat test; Combustion gas (head gasket) test.
This may be serious internal wear, such as a rod bearingStop — don't drive it
What to do now: Stop driving and turn the engine off. Have it towed to a shop for diagnosis.
Why: A deep knock that speeds up with the engine and is there at idle usually comes from inside the engine, often a worn connecting rod bearing. Each turn of the engine hammers the worn part, and it can fail suddenly and badly damage the engine.
Possible causes: Worn connecting rod bearing; Low oil or oil pressure; Cracked flexplate or loose torque converter bolts (automatic).
A shop will usually test: Engine stethoscope diagnosis; Oil pressure test; Oil analysis or filter inspection for metal.
A knock only when cold can be piston slap or a lifter that quiets as oil pressure buildsBook a check when convenient
What to do now: Make sure the oil level is correct and the oil change is up to date, then book a check when convenient.
Why: Pistons are slightly loose in their cylinders until they warm up and expand, which can cause a light knock for a minute or two. A lifter that loses oil overnight can also tap until oil pressure builds. Some engines make a mild cold-start noise for a long time, but only a technician listening to yours can tell whether it's that or early wear.
Possible causes: Piston slap; Lifter bleeding down overnight; Wrong oil thickness or overdue oil change.
A shop will usually test: Cold-start noise diagnosis; Oil pressure test; Check for known issues on your engine.
A light tap or tick can come from the valve train, injectors or an exhaust leakBook a check when convenient
What to do now: Check the oil level, and book a check when convenient.
Why: Many engines tick lightly, but a new or louder tick is worth having checked. Fuel injectors click as they open, and valves and lifters tap if oil is low or parts are worn. A small exhaust leak near the engine can also tick, especially when cold.
Possible causes: Lifter or valve noise; Exhaust manifold leak; Normal fuel injector noise.
A shop will usually test: Engine stethoscope check; Exhaust manifold leak check; Valve adjustment check if applicable.
The noise may not be from the engine at allBook a check when convenient
What to do now: Book an inspection when convenient. Tell the shop the noise follows bumps or road speed, not engine speed.
Why: A loose heat shield, exhaust hanger or suspension part can rattle or knock and sound like it's coming from the engine. If the noise changes with bumps or road speed rather than revving, the engine is less likely to be the source, but a technician should confirm it.
Possible causes: Loose exhaust heat shield; Broken exhaust hanger or loose exhaust part; Worn suspension part.
A shop will usually test: Exhaust system and heat shield inspection; Suspension inspection.
Have the knock diagnosed soon, before it gets worseGet it checked in the next few days
What to do now: Check the oil level, limit driving to short, gentle trips, and have it checked within a few days.
Why: Knocking ranges from mild fuel pinging to serious internal wear. Without knowing what it sounds like, it's safest to check the oil and have a technician listen soon.
Possible causes: Fuel-related pinging; Low oil or valve train noise; Internal wear (bearings).
A shop will usually test: Engine stethoscope diagnosis; Code scan including knock sensor data; Oil pressure test.
The fuel's octane may be too low for your engineSafe to check yourself first
What to do now: Check your owner's manual for the right fuel, and fill up with that grade at your next stop. Accelerate gently until then.
Why: Pinging happens when fuel ignites too early in the cylinder. Engines built for higher-octane fuel are more prone to it on regular. Modern engines can adjust to reduce it, but heavy, sustained pinging can still damage pistons over time.
Possible causes: Fuel octane lower than the engine needs; A tank of poor-quality fuel; Heavy load or heat.
A shop will usually test: Code scan and knock sensor data; Ignition timing check.
Carbon buildup or a lean-running engine are possible causesBook a check when convenient
What to do now: Book a check in the next couple of weeks. Until then, use the fuel your manual recommends and avoid flooring it up hills.
Why: Over time carbon builds up in the cylinders, raising compression and creating hot spots that make fuel ignite early. A vacuum leak, a clogged fuel injector or a faulty EGR valve can also make the engine run lean and hot, which leads to pinging.
Possible causes: Carbon deposits in the cylinders; Engine running lean (vacuum leak, fuel delivery); EGR system problem.
A shop will usually test: Code scan and fuel trim data; Smoke test for vacuum leaks; EGR system test; Carbon inspection with a borescope.
The engine computer may have detected knock, or the knock sensor may be faultyGet it checked in the next few days
What to do now: Have the codes read within a few days. Use the fuel your manual recommends and accelerate gently until then.
Why: The knock sensor listens for pinging so the engine computer can adjust the timing and protect the engine. A steady check engine light with pinging can mean real knock it can't control, or a sensor that isn't doing its job. A shop will usually check the wiring and the data before replacing the sensor.
Possible causes: Faulty knock sensor or wiring; Engine running lean; Carbon buildup.
A shop will usually test: Code scan and freeze-frame data; Knock sensor and wiring test; Fuel trim and vacuum leak check.
Related guides
Sources and references: University of North Texas Web Archive · State of Oregon