Home › Symptom guides › Engine stalls while driving
Won't start

Why does my car shut off while driving?

When the engine shuts off while you're moving, you lose power steering and most of your brake assist, so this is a safety problem even if it restarts. What you noticed right before it died is the best clue. Answer the questions below to narrow it down and see what to do next.

Stop and get help right away if:
  • If the engine dies, keep steering and press the brake firmly. Steering and braking can take much more force than usual.
  • If the temperature gauge is in the red, you see steam, or the oil light came on, don't restart it.
  • If you smell raw fuel or see smoke, get everyone out and away from the car.
  • If it stalls once, don't rely on it in traffic or on the highway until it's diagnosed.
Question 1

Right before or as it died, did you notice any of these?

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

The engine may have overheated and shut downStop — don't drive it

What to do now: Don't restart it. Let it cool for at least 30 minutes with the hood closed, then have it towed or call a mobile mechanic.

Why: An engine that gets hot enough to stall can warp or crack parts. Restarting it, or driving even a short distance, can turn a hose or thermostat repair into a major engine repair.

Possible causes: Coolant leak or low coolant; Failed cooling fan or water pump; Head gasket damage.

A shop will usually test: Cooling system pressure test; Cooling fan and water pump check; Combustion gas (head gasket) test.

The engine may have lost oil pressureStop — don't drive it

What to do now: Don't restart it. Check the oil level on the dipstick, then have it towed or call a mobile mechanic.

Why: Oil keeps metal parts from grinding against each other. When pressure drops, damage happens fast, and an engine that stalls with knocking may have seized. Restarting it can make the damage much worse.

Possible causes: Very low oil level; Failed oil pump or blocked oil pickup; Internal engine damage.

A shop will usually test: Oil pressure test with a gauge; Check whether the engine turns freely by hand; Oil inspection for metal particles.

The charging system may have failed and let the battery run downStop — don't drive it

What to do now: Don't count on it restarting and running. Have it towed to a shop or call a mobile mechanic.

Why: If the alternator stops charging, the car runs on the battery alone. Lights dim, gauges act up, and then the engine shuts off once the battery is too low to keep it running. A shop will usually test the alternator, belt and cables before replacing anything.

Possible causes: Failed alternator; Broken or slipping drive belt; Loose or corroded battery or charging cable.

A shop will usually test: Alternator output test; Drive belt inspection; Battery load test; Voltage-drop test on charging cables.

A worn ignition switch may be cutting powerStop — don't drive it

What to do now: Don't drive it until the ignition switch is checked. Have it towed, and check your VIN for open safety recalls.

Why: A worn ignition switch can slip from Run to Accessory or Off when it's jostled. The engine shuts off, and on some cars the airbags may be disabled too. Some vehicles have had recalls for exactly this.

Possible causes: Worn ignition switch; Heavy key ring pulling on the key; Loose wiring connection at the switch.

A shop will usually test: Ignition switch test; Recall check; Ignition wiring inspection.

It may have run out of fuelSafe to check yourself first

What to do now: Get somewhere safe, add a few gallons of fuel, and try to restart. It may need several tries of a few seconds each to refill the fuel lines.

Why: Sputtering and surging before a stall is a common sign of fuel starvation. When the tank is low, hard turns, hills or braking can slosh fuel away from the pickup and the engine starves.

Possible causes: Out of fuel; Inaccurate fuel gauge; Fuel pump struggling on a low tank.

A shop will usually test: Fuel gauge sender test; Fuel pressure test.

Possibly a fuel delivery problem or a severe misfireStop — don't drive it

What to do now: Don't drive it until it's checked. Have it towed or call a mobile mechanic who can scan for trouble codes.

Why: Sputtering, surging or losing power before a stall usually means the engine wasn't getting enough fuel or wasn't burning it properly. A weak fuel pump, a clogged filter or a bad sensor are common causes, and they tend to get worse. A shop will usually check codes and fuel pressure before replacing the pump.

Possible causes: Weak fuel pump or clogged fuel filter; Faulty airflow or throttle sensor; Severe misfire from an ignition coil or plugs.

A shop will usually test: Code scan and live sensor data; Fuel pressure and volume test; Ignition coil and spark plug check.

A failing sensor or electrical connection may be cutting the engineStop — don't drive it

What to do now: Don't rely on it until it's diagnosed. Have it towed or have a mobile mechanic scan for trouble codes, even if no warning light is on.

Why: An engine that cuts out instantly with no sputter has usually lost spark or the signal that controls it. A crankshaft position sensor that fails when hot is a common cause, and a shop will usually check codes and the sensor signal before replacing it. These problems come and go, so it may run fine for days before cutting out again.

Possible causes: Failing crankshaft or camshaft position sensor; Loose wiring, ground or fuel pump relay; Worn ignition switch.

A shop will usually test: Code scan, including stored and pending codes; Crank and cam sensor signal test; Wiring, ground and relay inspection.

A failed fuel pump or crankshaft sensor is possibleStop — don't drive it

What to do now: Stop cranking it. Have the car towed to a shop.

Why: If the engine cranks normally but won't fire after dying on the road, it has usually lost fuel or spark. A fuel pump that stopped running and a crankshaft sensor that stopped reporting are common causes, and a shop will usually check fuses, relays and codes first.

Possible causes: Failed fuel pump; Failed crankshaft position sensor; Fuel pump relay or fuse.

A shop will usually test: Fuel pressure test; Code scan for crank and cam sensor codes; Fuel pump relay and fuse check.

The car lost electrical power, possibly at the battery connectionStop — don't drive it

What to do now: Get to safety, then check whether a battery cable is loose or has come off. If you can't fix it on the spot, have it towed.

Why: When the engine and dash both go dead at once, the car has lost its main power. A loose or corroded battery cable is a common cause. A blown main fuse or a failed ignition switch can do the same.

Possible causes: Loose or corroded battery cable; Blown main fuse or fusible link; Failed ignition switch.

A shop will usually test: Battery cable and ground inspection; Main fuse check; Ignition switch test.

Have it diagnosed before you drive it againStop — don't drive it

What to do now: Have the car towed to a shop or call a mobile mechanic to scan it where it sits.

Why: An engine that shuts off while moving can stall again at a worse moment, like in an intersection or on a highway. The cause can be fuel, spark, electrical or overheating, and a scan plus a few tests will usually show which.

Possible causes: Fuel delivery problem; Sensor or ignition failure; Charging system failure.

A shop will usually test: Code scan; Fuel pressure test; Charging system test.

Related guides

Sources and references: J.D. Power · AAA

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.