Why are my headlights dim or flickering?
Your lights are a good window into your car's electrical system. Dimming or flickering can be as simple as an old bulb or as serious as an alternator that's about to stop charging. Answer a few questions to narrow down which it might be, and how soon to act.
- If the lights keep getting dimmer while you drive, especially at night, pull over somewhere safe before the car loses power.
- If you smell burning plastic or see smoke from the dash or under the hood, pull over, turn off the engine and step away from the car.
- If the headlights go out completely at night, turn on the hazard lights and get off the road as soon as it's safe.
Is the battery (charging) warning light on, or are other things acting strange, like gauges jumping or wipers slowing?
The battery light usually looks like a small red battery with + and − signs. It warns that the car isn't charging, even though it's shaped like a battery.
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
The alternator may have stopped charging, leaving the car running on the batteryStop — don't drive it
What to do now: Pull over somewhere safe and turn the engine off. Have it towed or call roadside assistance. It may not restart, and the lights could fail.
Why: With the battery light on and lights fading, the battery is being drained instead of recharged. Once it runs low, the engine can shut off, and power steering, lights and wipers can all fail with it.
Possible causes: Failed alternator; Broken or slipping belt; Loose or corroded charging cable.
A shop will usually test: Alternator output test; Battery test; Belt and charging cable inspection.
The charging system may have a problem. Get it tested right awayGet it checked in the next few days
What to do now: Have the battery and alternator tested as soon as you can, ideally today. Many auto parts stores test them free. Before driving, look at whether the engine belt is still in place (engine off). Until it's tested, turn off electrical extras and avoid driving at night, on highways or far from help.
Why: The battery light means the car's computer sees that the system isn't charging properly. The car can run for a while on the battery alone, but how long is hard to predict.
Possible causes: Weak or failing alternator; Slipping or worn belt; Loose or corroded battery or charging cable.
A shop will usually test: Alternator output test; Battery load test; Charging circuit voltage-drop test.
The alternator may be getting weak, or the belt may be slippingBook a check when convenient
What to do now: Have the battery and charging system tested when convenient. Most auto parts stores do this free.
Why: At idle, the alternator spins slowest and makes the least power. A healthy one still keeps up. If the lights dim noticeably at idle and brighten when you rev, the alternator or belt may not be keeping up with demand.
Possible causes: Weakening alternator; Slipping belt; Aging battery.
A shop will usually test: Alternator output test at idle and under load; Belt and tensioner inspection; Battery test.
A pulsing flicker can point to a failing alternatorGet it checked in the next few days
What to do now: Get the charging system tested within the next few days. Keep trips short and avoid night driving if you can.
Why: An alternator should give a steady voltage. When parts inside it wear out, the voltage pulses, and you see that as flickering lights that follow engine speed. If the alternator is the cause, it often gets worse until it stops charging, so it's worth testing rather than waiting.
Possible causes: Failing alternator voltage regulator or diodes; Loose or corroded battery or ground connection; Slipping belt.
A shop will usually test: Alternator output and ripple test; Ground connection voltage-drop test; Belt inspection.
A loose connection or worn headlight switch is a common causeBook a check when convenient
What to do now: Check that the battery cables are tight and clean, then book an electrical check when convenient.
Why: When bumps or touching the switch make the lights flicker, power is being interrupted somewhere along the way. A worn switch, a loose plug or a corroded ground wire are the usual suspects.
Possible causes: Worn headlight switch or stalk; Loose or corroded ground wire or battery cable; Loose or melted headlight connector.
A shop will usually test: Voltage-drop test on the lighting and ground circuits; Headlight switch test; Connector inspection.
The new bulbs may not be compatible with your car's electrical systemSafe to check yourself first
What to do now: Put the original-type bulbs back in and see if the flicker stops.
Why: Many cars check headlight bulbs by sending small pulses of power through them. Some LED and HID bulbs react to that with flicker, or set off a bulb-out warning. In that case the bulb, rather than the car, is often the issue.
Possible causes: Bulb not compatible with the car's bulb-check system; Loose fit or connector on the new bulb; Wiring or switch problem.
A shop will usually test: Lighting circuit check; Body control module scan for bulb faults.
A brief dip is often normal, but a big one points to the battery or connectionsBook a check when convenient
What to do now: Check that the battery terminals are tight and clean, and have the battery and charging system tested when convenient.
Why: Big electrical loads, like the A/C fan or power windows, briefly pull extra power. A quick, small dip is normal on many cars. A deep or long dip means the battery, alternator or a connection is struggling to keep up.
Possible causes: Aging battery; Weak alternator; Loose or corroded ground connection.
A shop will usually test: Battery load test; Alternator output test under load; Ground connection voltage-drop test.
Often a bulb on its way out, or a loose bulb connectorSafe to check yourself first
What to do now: Check that the bulb's plug is firmly connected, then try a new bulb. It's often best to replace both sides so they match.
Why: When only one light is affected, the problem is usually at that light: the bulb, its plug or its ground. Bulbs often dim or flicker before they burn out.
Possible causes: Aging bulb; Loose or corroded bulb connector; Moisture inside the headlight.
A shop will usually test: Bulb and connector inspection; Headlight circuit voltage test.
Hazy lenses or aging bulbs are common reasonsSafe to check yourself first
What to do now: Look at the headlight lenses. If they're yellow or cloudy, clean or restore them. If they're clear and the dash lights look normal, try new bulbs on both sides.
Why: Plastic headlight lenses yellow and cloud with age and sun, which blocks a lot of light. Bulbs also lose brightness over time. Both happen slowly, so you may not notice until it's quite bad.
Possible causes: Yellowed or cloudy headlight lenses; Old bulbs; Low system voltage or poor ground.
A shop will usually test: Headlight aim check; Charging system test; Ground connection check.
The battery may be weak or not fully chargedSafe to check yourself first
What to do now: Check that the battery terminals are tight and clean, then have the battery tested. Many auto parts stores do it free.
Why: With the engine off, the lights run only on the battery. If they're dim then but bright once the engine is running, a low or worn battery is a common reason.
Possible causes: Aging or weak battery; Corroded or loose battery terminals; Something draining the battery while parked.
A shop will usually test: Battery load test; Charging system test; Parasitic draw test.
Have the battery and charging system tested firstBook a check when convenient
What to do now: Check that the battery terminals are tight and clean, then have the battery and charging system tested when convenient.
Why: Most dim or flickering light problems come from the battery, alternator, a loose connection or the bulbs themselves. A charging system test is a quick way to check for the more serious causes first.
Possible causes: Charging system problem; Loose or corroded connection; Aging bulbs or hazy lenses.
A shop will usually test: Battery test; Alternator output test; Lighting circuit check.
Related guides
Sources and references: AAA