Why won't my key turn in the ignition?
A key that won't turn is usually the steering lock holding the ignition, not a broken car. Most of the time you can free it in seconds with the right technique. If that doesn't work, the clues below separate a worn key from a worn lock so you know who to call.
- Never turn the key to Lock or pull it out while the car is moving. The steering can lock.
- If the engine has ever shut off when the key was bumped or the key ring swung while driving, don't drive it until the ignition switch is checked.
Which of these fits best?
Most cars lock the steering wheel when the key is out. If the wheel was turned when you parked, the lock pushes on the ignition and stops the key from turning.
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
It was likely the steering lock holding the keySafe to check yourself first
What to do now: If the key now turns smoothly every time, this was most likely the steering lock under pressure. Next time, straighten the wheels before you shut the car off and avoid leaning on the wheel as you get out.
Why: The steering lock is a pin that drops into the steering column when the key is out. If the wheel is turned against it, the pin is pinched so tightly that the key can't turn. Rocking the wheel takes the pressure off and lets the key turn.
Possible causes: Steering lock under tension; Early wear in the ignition lock.
A shop will usually test: Ignition lock cylinder inspection; Steering column lock check.
Your key may be worn down or cut slightly wrongSafe to check yourself first
What to do now: Use the spare key if you have one, and have a new key made from the original factory code or the spare, not copied from the worn key.
Why: The small cuts on a key wear down over years of use. Once they're rounded off, the pins inside the lock don't line up and the key won't turn. A copy made from a worn key copies the wear too.
Possible causes: Worn key; Poorly cut copy; Bent key.
A shop will usually test: Key cut by code; Key programming if the key has a chip.
The ignition lock may be wearing outBook a check when convenient
What to do now: Book a locksmith or shop to look at the ignition lock soon, before it leaves you stuck somewhere. Until then, turn the key gently and don't force it.
Why: The ignition lock has small spring-loaded pins that wear along with the key. When it gradually gets harder to turn over weeks, lock wear is a common reason, and it rarely fixes itself.
Possible causes: Worn ignition lock cylinder; Dirt or a dried-up lock; Worn key.
A shop will usually test: Ignition lock cylinder inspection; Ignition switch check; Lock cylinder repair or replacement, keyed to your existing key, if it is worn.
The ignition lock may have jammedBook a check when convenient
What to do now: Stop trying to force it. Call a locksmith who works on cars, or have the car towed to a shop or dealer.
Why: When a key that worked fine suddenly won't turn, even with the wheel loose, something inside the lock may have broken or seized. Forcing it risks snapping the key or damaging the steering column.
Possible causes: Failed ignition lock cylinder; Damage from a theft attempt; Steering lock stuck.
A shop will usually test: Ignition lock cylinder inspection, and repair or replacement if it has failed; Steering column lock inspection; Ignition switch check.
Something is blocking the key, or the key is damagedSafe to check yourself first
What to do now: Check that you have the right key and that it's clean and straight, then look into the slot with a flashlight for dirt or a foreign object.
Why: If the key won't slide in all the way, the pins in the lock can't line up, so it will never turn. That's often something on the key or in the slot, not a problem deeper in the car.
Possible causes: Dirty, bent or damaged key; Debris or a foreign object in the lock; Damaged lock.
A shop will usually test: Lock cylinder inspection and cleaning; Lock cylinder replacement if damaged.
The car may not register that it's in ParkSafe to check yourself first
What to do now: With your foot on the brake, move the shifter firmly all the way into Park, then try turning the key back to Off.
Why: Automatic cars won't let the key turn to Lock or come out unless the transmission is fully in Park. If the shifter is a hair short of Park, or the part that senses Park is out of adjustment, the key stays trapped.
Possible causes: Shifter not fully in Park; Weak or dead battery; Faulty key release or shifter linkage.
A shop will usually test: Shifter linkage adjustment check; Key release (interlock) test; Battery test.
Try the simple fixes first, then call a locksmithSafe to check yourself first
What to do now: Make sure the car is in Park, then turn the key gently while rocking the steering wheel left and right. Try the spare key if you have one.
Why: Most stuck keys come down to the steering lock, a worn key or a worn lock. The two quick checks above help rule out the most common causes before you pay for help.
Possible causes: Steering lock under tension; Worn key; Worn or jammed ignition lock.
A shop will usually test: Ignition lock cylinder inspection; Key cut by code.
Related guides
Sources and references: NAPA Know How · Kelley Blue Book