Why is my power steering warning light on?
Most newer cars use an electric motor to help you steer, and this light means that system has found a problem. Sometimes it's a simple voltage or reset issue, and sometimes the steering has lost its assist. How the steering feels right now is the best clue to how urgent it is.
- If the steering jerks, pulls on its own, or gets stuck, pull over safely and don't drive it.
- If the battery light is on too, the car may soon lose power completely. Get off the road while you still can.
- If the steering suddenly gets heavy, grip the wheel firmly with both hands, slow down and steer with steady effort to a safe place to stop.
How does the steering feel right now?
Power steering is what makes the wheel easy to turn. Without it, the car still steers, but it feels like turning a heavy truck at low speed.
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
The charging system may be failing, and the steering may have lost power because of itStop — don't drive it
What to do now: Pull over where it's safe and turn the engine off. Have the car towed or call a mobile mechanic rather than driving on.
Why: When the battery light and the steering light come on together, the car is often running on battery power alone. The steering motor is one of the first systems to cut out as voltage drops, and the engine may stall soon after.
Possible causes: Alternator not charging; Broken or slipping drive belt; Loose or corroded battery cable.
A shop will usually test: Charging system (alternator) output test; Battery load test; Drive belt inspection; Steering system code scan once voltage is fixed.
The steering motor may have got hot and be protecting itselfStop — don't drive it
What to do now: Park, turn the engine off, and let the car sit for 10 to 15 minutes without turning the wheel. Then restart and, while still parked, check whether the steering feels normal. Don't drive it while the steering is heavy.
Why: Many electric steering systems cut back their help when the motor gets hot from a lot of turning while the car is barely moving. Once it cools, the assist normally returns on its own.
Possible causes: Heat protection after heavy low-speed steering; Weak battery adding to the load; Steering motor starting to fail.
A shop will usually test: Steering system code scan; Battery and charging test; Steering motor current check.
The steering system may need to reset after the battery workSafe to check yourself first
What to do now: Make sure the battery clamps are tight. Then, parked with the engine running, turn the wheel slowly all the way left, all the way right, and back to center, and restart the car.
Why: Low voltage or a lost connection can make the steering computer store a fault or forget where center is. After a jump start or new battery, some cars need a simple reset or a short drive before the light goes out.
Possible causes: Steering angle sensor lost its calibration; Battery still low after a jump start; Loose battery clamp.
A shop will usually test: Steering angle sensor calibration; Battery and charging test; Steering system code scan.
The power steering assist may have shut off because of a faultStop — don't drive it
What to do now: Find a safe place to stop, turn the car off for a minute and restart it. If the steering is still heavy, don't drive it. Have it towed or have a mobile mechanic come to you.
Why: When the steering system detects a fault, it switches the motor off so it can't steer the car the wrong way. In most cars the wheel is still mechanically connected to the wheels, but turning takes much more effort, especially when parking.
Possible causes: Steering torque or angle sensor fault; Failing steering motor or control module; Wiring or connector problem.
A shop will usually test: Steering system code scan; Battery and charging test; Steering sensor and motor tests; Wiring and connector inspection.
The steering is behaving abnormally. Treat this as a safety problemStop — don't drive it
What to do now: Pull over where it's safe and don't drive it. Have the car towed to a shop.
Why: Steering that tugs by itself, feels notchy or sticks can mean the steering system is giving the wrong amount of help or a part is binding. That can make the car hard to control, so it isn't worth the risk.
Possible causes: Faulty steering torque sensor or control module; Worn or damaged steering rack, column or joint; Known defect covered by a recall.
A shop will usually test: Steering system code scan; Steering rack, column and tie rod inspection; Recall and software update check.
An on-and-off steering fault, often linked to low voltage or a loose connectionGet it checked in the next few days
What to do now: Check that the battery clamps are tight, then get the battery, charging system and steering codes checked within the next few days.
Why: Electric steering needs steady voltage and good connections. A weak battery, a loose cable or a tired motor can make the assist drop out and come back. It usually gets worse over time.
Possible causes: Weak battery or charging problem; Loose or corroded connection; Steering motor or module starting to fail.
A shop will usually test: Battery load test; Alternator output test; Steering system code scan; Wiring and ground inspection.
The steering system has stored a fault, even though it feels normal for nowGet it checked in the next few days
What to do now: Get the steering codes read within the next few days. Until then, keep both hands on the wheel and be ready for the steering to get heavier.
Why: The light means the system found a problem, even if it's still giving you help. Some faults only reduce assist under certain conditions, and the assist can switch off without much warning.
Possible causes: Steering angle sensor out of calibration; Voltage dip that set a stored fault; Early sensor or motor fault.
A shop will usually test: Steering system code scan; Steering angle sensor calibration; Battery and charging test.
Have the steering system checked before you rely on itGet it checked in the next few days
What to do now: In an empty parking lot, turn the wheel slowly at walking speed. If it's much harder than usual, have it towed. If it feels normal, book a check within a few days.
Why: The steering light can mean anything from a stored glitch to a complete loss of assist. A quick low-speed test tells you which, and a shop scan finds the reason.
Possible causes: Steering sensor or motor fault; Low voltage from the battery or alternator.
A shop will usually test: Steering system code scan; Battery and charging test.
Heavy steering after battery work. Try a reset, but don't drive it heavyStop — don't drive it
What to do now: Don't drive it while the steering is heavy. Make sure the battery clamps are tight. Then, parked with the engine running, turn the wheel slowly all the way left, all the way right, and back to center, and restart the car. If the steering is still heavy, have it towed or have a mobile mechanic come to you.
Why: Low voltage or a lost connection can make the steering computer store a fault or forget where center is. After a jump start or new battery, some cars need a simple reset or a short drive before the light goes out.
Possible causes: Steering angle sensor lost its calibration; Battery still low after a jump start; Loose battery clamp.
A shop will usually test: Steering angle sensor calibration; Battery and charging test; Steering system code scan.
Steering assist that comes and goes. Get it checked before relying on itStop — don't drive it
What to do now: Avoid driving it until it's checked, because the assist can drop out in the middle of a turn. Check that the battery clamps are tight. A mobile mechanic can test the battery, charging system and steering codes where the car sits, or have it towed.
Why: Electric steering needs steady voltage and good connections. A weak battery, a loose cable or a tired motor can make the assist drop out and come back. Sudden heavy steering is hard to react to, and the fault usually gets worse over time.
Possible causes: Weak battery or charging problem; Loose or corroded connection; Steering motor or module starting to fail.
A shop will usually test: Battery load test; Alternator output test; Steering system code scan; Wiring and ground inspection.
Related guides
Sources and references: Kia owner's manual · National Highway Traffic Safety Administration (NHTSA)