Home › Symptom guides › Rough idle or shaking when stopped
Shaking

Why does my car shake or idle rough when stopped?

An engine that shakes at a stop is either running unevenly or passing normal vibration into the car through worn mounts. Warning lights and the way the shake changes with gear, A/C and temperature tell these apart quickly. Answer the questions below to find the most likely cause and how soon to act.

Stop and get help right away if:
  • If the check engine light is flashing, pull over safely and turn off the engine.
  • If the temperature gauge is in the red or you see steam, pull over and turn off the engine.
  • If the oil pressure light comes on, stop the engine as soon as it's safe.
  • If you smell raw fuel, turn off the engine and keep sparks and flames away.
Question 1

Do you see any of these warning signs on the dash?

The check engine light is the amber engine-shaped symbol. The oil pressure light looks like a red oil can.

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

The engine may be misfiring badly, which can damage the catalytic converterStop — don't drive it

What to do now: Pull over safely and turn off the engine. Have the car towed or call a mobile mechanic.

Why: A flashing check engine light usually means the engine is misfiring badly enough to send unburned fuel into the exhaust. That fuel can overheat the catalytic converter within minutes and ruin it, and the shaking itself means a cylinder isn't doing its share.

Possible causes: Failed ignition coil or spark plug; Fuel injector not working; Mechanical engine problem.

A shop will usually test: Code scan for misfire codes; Spark plug and coil inspection; Fuel injector test; Compression test.

The engine may be overheating. Stop before it causes damageStop — don't drive it

What to do now: Pull over safely and turn off the engine. Don't open the radiator cap while it's hot. Have it towed or call a mobile mechanic.

Why: An engine that runs too hot can start to misfire and shake, and continued driving can damage the head gasket or the engine itself. A rough idle with high temperature is a sign to stop right away.

Possible causes: Low coolant from a leak; Cooling fan not working; Head gasket failure.

A shop will usually test: Cooling system pressure test; Cooling fan operation check; Combustion gas test for a head gasket leak.

The engine may be low on oil or losing oil pressureStop — don't drive it

What to do now: Turn off the engine as soon as it's safe. Check the oil level once it's parked on level ground. Don't run the engine again until the cause is found.

Why: Low oil pressure means the engine's moving parts aren't getting enough lubrication. Running it this way can destroy the engine within minutes, and a rough idle with this light can mean damage is already starting.

Possible causes: Low oil level; Failing oil pump or clogged pickup; Faulty oil pressure sensor.

A shop will usually test: Mechanical oil pressure test; Oil leak inspection; Oil pressure sensor check.

A misfire is a common cause, often from a worn ignition partGet it checked in the next few days

What to do now: If the check engine light starts flashing, pull over when it's safe and turn off the engine. Otherwise: Have the engine scanned for codes within the next few days. Until then, keep trips short and avoid hard acceleration.

Why: When one cylinder doesn't fire properly, the engine loses its smooth rhythm and shakes, especially at idle and when accelerating. A steady check engine light along with stumbling often points to a misfire, and leaving it can damage the catalytic converter over time.

Possible causes: Worn spark plugs; Failing ignition coil or plug wire; Clogged or failing fuel injector.

A shop will usually test: Code scan and misfire counts; Spark plug and coil inspection; Fuel injector test.

A vacuum leak or dirty throttle body is a common causeBook a check when convenient

What to do now: Book a check and ask for a code scan and a vacuum leak test. Mention that it's worst at idle.

Why: At idle, the engine runs on a small, carefully measured amount of air. A cracked hose or leaking gasket lets in extra air the computer doesn't know about, which makes the idle shaky or hunt up and down. A dirty throttle body can cause a similar rough idle.

Possible causes: Cracked vacuum hose or leaking intake gasket; Dirty throttle body or idle control fault; Faulty PCV valve or hose.

A shop will usually test: Code scan and fuel trim data; Smoke test for vacuum leaks; Throttle body inspection and cleaning.

A fuel leak or a leaking injector is possibleStop — don't drive it

What to do now: Turn off the engine and look for wet spots or dripping fuel under the car and around the engine. If you find any or the smell is strong, have it towed.

Why: A rough idle with a raw fuel smell can mean an injector is leaking or stuck open, flooding a cylinder, or that fuel is leaking outside the engine. Either way, fuel near a hot engine is a fire risk.

Possible causes: Leaking or stuck-open fuel injector; Leaking fuel line or fuel rail; Engine running very rich.

A shop will usually test: Fuel leak inspection; Fuel injector leak test; Code scan and fuel trim data.

Worn engine or transmission mounts are a likely causeBook a check when convenient

What to do now: Book an inspection of the engine and transmission mounts. Mention that it shakes more in Drive than in Park.

Why: Mounts are rubber blocks that hold the engine and soak up its normal vibration. When they crack or collapse, you can feel the engine through the car, mostly in gear at a stop where the engine is pulling against the brakes. A badly broken mount can let the engine move enough to strain hoses and wiring.

Possible causes: Worn or collapsed engine mount; Worn transmission mount; Engine idling slightly rough.

A shop will usually test: Engine and transmission mount inspection; Watch for engine movement while shifting with the brakes held; Code scan to rule out a misfire.

The idle may be too low to handle the A/C loadBook a check when convenient

What to do now: Book a check when convenient and mention that the shake gets worse with the A/C on.

Why: The A/C compressor adds load to the engine. The engine computer should raise the idle slightly to make up for it. If the idle control is dirty or a mount is worn, you feel the engine labor and shake.

Possible causes: Dirty throttle body or idle control fault; Worn engine mounts; A/C compressor problem.

A shop will usually test: Idle control and throttle body check; Engine mount inspection; A/C compressor inspection.

A cold-start rough idle often points to a sensor or carbon buildupBook a check when convenient

What to do now: Book a check when convenient. Note the outside temperature and how long it takes to smooth out.

Why: A cold engine needs extra fuel and a slightly higher idle. If a temperature sensor gives the computer a wrong reading, or carbon has built up on the valves or injectors, the engine can run rough until it warms up.

Possible causes: Faulty coolant temperature sensor; Carbon buildup or dirty injectors; Small vacuum leak.

A shop will usually test: Code scan and live sensor data; Smoke test for vacuum leaks; Injector and intake valve inspection.

The engine may be running unevenly at idle. A misfire or air leak is possibleBook a check when convenient

What to do now: If the check engine light starts flashing, pull over when it's safe and turn off the engine. Otherwise: Book a check and ask for a code scan, even with no warning light. Problems at idle often show up as stored data before the light comes on.

Why: A rough idle that's the same in Park and in gear usually comes from the engine itself rather than the mounts. Early ignition wear, a small vacuum leak or a dirty throttle body are common causes, and they're easiest to fix before they cause a misfire.

Possible causes: Worn spark plugs or weak ignition coil; Vacuum leak; Dirty throttle body.

A shop will usually test: Code scan, misfire counts and fuel trim data; Spark plug and coil inspection; Smoke test for vacuum leaks.

Get a code scan to narrow it downBook a check when convenient

What to do now: Book a check and ask for a code scan. Note whether the shake changes in Park versus Drive and with the A/C on or off.

Why: A rough idle can come from the engine running unevenly or from worn mounts letting normal vibration through. A code scan and a quick test in different gears can usually separate these quickly.

Possible causes: Misfire from worn ignition parts; Vacuum leak or dirty throttle body; Worn engine mounts.

A shop will usually test: Code scan; Engine mount inspection; Smoke test for vacuum leaks.

Related guides

Sources and references: AA1Car · National Highway Traffic Safety Administration (NHTSA)

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.