Home › Symptom guides › Steam or smoke from under the hood
Running hot

Why is steam or smoke coming from under my hood?

Steam or smoke from under the hood can be anything from harmless water burning off to an engine that's badly overheating or a fire starting. The color, the smell and your temperature gauge tell you which. Answer the questions below to find out how serious it is and what to do right now.

Stop and get help right away if:
  • If you see flames or the smoke keeps getting thicker, get everyone out, move well away from the car and call 911. Don't open the hood.
  • Never open the radiator cap or coolant tank cap on a hot engine. The coolant is under pressure and can spray out and burn you.
  • If the temperature gauge is in the red, pull over and turn off the engine as soon as it's safe.
  • Wait until steam has stopped before opening the hood, and keep your face and hands back when you do.
Question 1

Do you see either of these right now?

The temperature gauge usually has a C (cold) and H (hot) or a thermometer symbol. Some cars only have a red or blue thermometer warning light instead of a gauge.

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

This could be an engine fire starting. Get away from the carStop — don't drive it

What to do now: Turn off the engine, get everyone out and at least 100 feet away, and call 911. Don't open the hood and don't go back for belongings.

Why: Flames or thick, darkening smoke mean something is burning, not just steam. Opening the hood lets in a rush of air that can make a fire flare up suddenly, and fuel lines and tires can burn quickly.

Possible causes: Fuel leaking onto hot engine or exhaust parts; Electrical short or melting wiring; Oil or other fluid burning on the exhaust.

A shop will usually test: Fire damage inspection of wiring, fuel lines and hoses; Fuel system leak inspection; Electrical system inspection.

The engine is overheating. Stop now to avoid serious damageStop — don't drive it

What to do now: Pull over as soon as it's safe, turn off the engine and let it cool for at least 30 minutes. Don't open the radiator cap. Have the car towed or call a mobile mechanic.

Why: Steam with the gauge in the red means the engine is running far hotter than it's designed to. Keeping it running can warp the cylinder head or blow the head gasket, turning a simple repair into a major one.

Possible causes: Coolant leak (hose, radiator or water pump); Radiator fan not working; Thermostat stuck closed; Blown head gasket.

A shop will usually test: Cooling system pressure test; Radiator fan and fan circuit test; Thermostat check; Combustion gas (block) test for a head gasket leak.

A coolant hose, the radiator or the water pump may be leaking badlyStop — don't drive it

What to do now: Turn off the engine and stay back while it cools. Don't restart it. Have the car towed or have a mobile mechanic come to you.

Why: When coolant is pouring out, the engine will lose most of it within minutes and overheat quickly. Running it even a short distance this way can cause serious engine damage.

Possible causes: Burst or split coolant hose; Cracked radiator or radiator seam; Failed water pump.

A shop will usually test: Visual inspection of hoses, radiator and water pump; Cooling system pressure test; Check for overheating damage.

Coolant boiling over usually means the engine is overheatingStop — don't drive it

What to do now: Turn off the engine and let it cool for at least 30 minutes without opening any caps. Then have the car towed or call a mobile mechanic.

Why: Coolant boiling out of the overflow tank means it's getting hotter than the system can handle. That happens when coolant is low, flow is blocked, the cap isn't holding pressure, or exhaust gases are leaking into the coolant.

Possible causes: Low coolant from a leak; Faulty radiator or tank cap; Thermostat stuck or fan not working; Head gasket leak.

A shop will usually test: Cooling system pressure test; Radiator cap pressure test; Combustion gas (block) test; Thermostat and fan check.

Coolant may be leaking onto hot engine partsGet it checked in the next few days

What to do now: Don't drive until you've checked the coolant level with the engine fully cool. If it's between MIN and MAX, top it up with the type listed in your owner's manual and get the leak checked within a few days. If the tank is empty or well below MIN, have it inspected before driving.

Why: A sweet smell or steam with a normal temperature gauge often comes from a small amount of coolant dripping or seeping onto hot parts and steaming off. Leaks tend to grow, and running low on coolant will make the engine overheat. When coolant is very low, the gauge can also read normal even though the engine is hot, so the level check matters more than the gauge.

Possible causes: Leaking hose or loose hose clamp; Leaking radiator; Water pump seal leak; Heater core leak.

A shop will usually test: Cooling system pressure test; UV dye leak test; Radiator cap pressure test.

Oil may be dripping onto the hot exhaustGet it checked in the next few days

What to do now: Once the engine is cool, check the oil level on the dipstick and top it up if it's low. Get the leak looked at within a few days, and sooner if the smoke doesn't fade.

Why: Oil smoking on the exhaust gives off a heavy, sharp burning smell and bluish-white smoke. Common causes are a leaking gasket or a loose part, but oil on hot parts is a fire risk and the engine can run low on oil.

Possible causes: Leaking valve cover gasket; Spill or loose part from a recent oil change; Other engine oil leak.

A shop will usually test: Oil leak inspection (sometimes with UV dye); Valve cover gasket inspection; Oil filter and drain plug check.

Something may be melting or a belt may be burning. Don't keep running itStop — don't drive it

What to do now: Turn off the engine and don't restart it. Once it's cool, look for anything stuck to the exhaust. Have the car towed if you can't find a simple cause.

Why: Burning rubber or plastic smells mean something that shouldn't be getting hot is. A belt slipping on a seized pulley, melting wiring, or debris on the exhaust can each start a fire if you keep going.

Possible causes: Drive belt slipping on a seized pulley or A/C compressor; Electrical short or melting wiring; Plastic bag or road debris on the exhaust.

A shop will usually test: Drive belt and pulley inspection; Wiring and fuse inspection; Brake drag check.

This could be water steaming off hot engine partsSafe to check yourself first

What to do now: Watch it for a few minutes. If the steam fades, has no smell and the temperature gauge stays in its normal spot, water burning off is the likely explanation. Check the coolant level the next time the engine is cold.

Why: Rain, a car wash or splashing through puddles leaves water on the hot engine and exhaust. It turns to light, odorless white steam that disappears quickly. That's common and usually stops on its own once things dry out.

Possible causes: Rain or wash water evaporating; Small coolant seep.

A shop will usually test: Cooling system pressure test if the steam keeps coming back.

White vapor from the tailpipe on a cold morning is usually normalSafe to check yourself first

What to do now: Watch whether the vapor fades once the engine is fully warmed up, usually within 10 to 15 minutes of driving.

Why: Burning fuel makes water vapor. When the engine and exhaust are cold, that vapor condenses into white clouds out of the tailpipe. Once things warm up, it should become hard to see.

Possible causes: Normal condensation; Coolant burning inside the engine (head gasket).

A shop will usually test: Combustion gas (block) test; Cooling system pressure test.

Treat it as overheating until you know it isn'tStop — don't drive it

What to do now: Pull over when it's safe, turn off the engine and wait at least 30 minutes before opening the hood. Don't open the radiator cap.

Why: Without knowing the temperature reading or the smell, it's hard to rule out overheating, and driving an overheating engine can ruin it quickly. Stopping costs a few minutes; guessing wrong can cost the engine.

Possible causes: Engine overheating; Coolant or oil leaking onto hot parts; Water evaporating.

A shop will usually test: Cooling system pressure test; Oil and coolant leak inspection; Code scan for temperature sensor data.

Related guides

Sources and references: U.S. Fire Administration · AAA

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.