Home › Symptom guides › Steering wheel shakes
Shaking

Why is my steering wheel shaking?

A shaking steering wheel usually comes from something at the front wheels: the tires, the wheels themselves, the brakes or the steering parts. When the shake happens helps narrow down which. Answer the questions below to see the most likely causes and how soon to deal with it.

Stop and get help right away if:
  • If the shaking starts suddenly and violently, slow down and pull over safely right away.
  • If a tire has a bulge, a bubble or exposed cords, don't drive on it. It can blow out.
  • If a wheel was removed recently and you hear clicking or clunking from that corner, stop and check the lug nuts before going any further.
Question 1

When does the steering wheel shake?

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

A damaged tire may be causing the shake and could failStop — don't drive it

What to do now: Don't drive on that tire. Put on the spare or call roadside assistance.

Why: A bulge or lump means the tire's internal structure is broken, often from a pothole or from belts separating inside. A tire in that state shakes the steering and can blow out without warning.

Possible causes: Sidewall bulge from an impact; Tread separation; Bent wheel as well.

A shop will usually test: Tire inspection and replacement; Wheel runout (bend) check; Balance after the new tire is fitted.

A loose wheel is dangerous. Don't drive until it's securedStop — don't drive it

What to do now: Don't drive the car. Call roadside assistance or a mobile mechanic to tighten the lug nuts to the correct torque and check the wheel studs.

Why: Loose lug nuts let the wheel shift on the hub, which you feel as a shake or clunk in the steering. If they keep loosening, the wheel can come off while you're driving.

Possible causes: Lug nuts not tightened properly after wheel work; Damaged wheel studs.

A shop will usually test: Torque the lug nuts to the vehicle's specification; Inspect wheel studs and wheel mounting holes; Check the wheel bearing and hub for damage.

A bent wheel or tire damage from an impact is a likely causeGet it checked in the next few days

What to do now: If the shake is strong, or you weren't able to check the tires and lug nuts, don't drive on. Call roadside assistance. If it's mild and the tires and lug nuts look normal, keep your speed down and have the wheels and tires inspected within the next few days.

Why: Hitting a pothole or curb can bend the edge of a wheel or damage the tire inside where you can't see it. Either one makes the wheel spin unevenly, and you feel it as a shake that grows with speed. Damage you can't see can still get worse, which is why a shop will usually check the wheel on a balancer before deciding what needs replacing.

Possible causes: Bent wheel; Internal tire damage; Bent steering or suspension part.

A shop will usually test: Wheel runout (bend) check on a balancer; Tire inspection; Alignment check and suspension inspection.

Uneven brake rotors are a common cause of shaking when brakingBook a check when convenient

What to do now: Book a brake inspection and mention that the steering wheel shakes when you brake.

Why: When the brake rotors (the metal discs the pads squeeze) wear unevenly, the pads grip a surface that isn't flat. That pulses back through the steering wheel and the brake pedal every time you slow down. A shop will usually measure the rotors before deciding whether to resurface or replace them.

Possible causes: Uneven or worn brake rotors; Sticking brake caliper; Worn front suspension parts.

A shop will usually test: Rotor thickness and runout measurement; Brake pad and caliper inspection; Front suspension inspection.

A wheel may be out of balance or not seated right after the tire workBook a check when convenient

What to do now: Go back to the shop that did the work and ask them to recheck the balance and the lug nut torque.

Why: A shake that starts right after tire work often means a wheel weight was missed or fell off, or the tire wasn't seated evenly on the wheel. Good shops expect to recheck their work, and it's usually a quick check.

Possible causes: Wheel out of balance; Tire not seated evenly, or a defective tire; Lug nuts tightened unevenly.

A shop will usually test: Rebalance (a road-force balance if available); Lug nut torque check; Tire and wheel runout check.

Tire balance is a common cause of a highway-speed shakeBook a check when convenient

What to do now: Have the front tires balanced and inspected at a tire shop.

Why: A shake that appears in one speed range, often around 50 to 70 mph, and fades above or below it is a classic sign of a wheel out of balance. Wheel weights fall off and tires wear unevenly over time.

Possible causes: Front tire out of balance; Rear tire out of balance; Out-of-round tire or bent wheel.

A shop will usually test: Wheel balance; Wheel runout check; Tire inspection.

Worn steering or suspension parts may be letting the wheels shimmyGet it checked in the next few days

What to do now: Have the front suspension and steering inspected within the next few days. Avoid high speeds until then.

Why: Tie rods, ball joints and control arm bushings hold the front wheels steady. When they wear, small vibrations can turn into a shimmy you feel in the wheel. Worn shocks can also let the tires bounce, which wears the tread into a wavy pattern that makes the shake worse. A shop will usually check each joint for play before deciding which part to replace.

Possible causes: Worn tie rod ends; Worn ball joints or control arm bushings; Worn shocks or struts with cupped tires.

A shop will usually test: Steering and suspension inspection on a lift; Tie rod and ball joint play check; Alignment check.

A worn wheel bearing may be causing the shake and noiseGet it checked in the next few days

What to do now: Have the wheel bearings checked within the next few days. Keep speeds moderate until then.

Why: A wheel bearing lets the wheel spin smoothly on the hub. When it wears, it usually hums or growls first, and as it gets worse it can let the wheel wobble, which you feel in the steering.

Possible causes: Worn front wheel bearing; Uneven tire wear; Worn suspension parts.

A shop will usually test: Wheel bearing play check on a lift; Spin test listening for roughness; Tire wear inspection.

A low-speed wobble often comes from a damaged tire or a bent wheelGet it checked in the next few days

What to do now: Look over each tire for lumps or uneven spots, then have the tires and wheels inspected within the next few days.

Why: Balance problems mostly show up at higher speeds. A slow, side-to-side wobble at low speed more often comes from a tire whose internal belts have shifted or a wheel that's bent, so it doesn't roll true.

Possible causes: Shifted or separated belt inside a tire; Bent wheel; Worn steering parts.

A shop will usually test: Tire and wheel runout check; Tire inspection; Steering linkage check.

Start with a tire and wheel check, the most common sourceBook a check when convenient

What to do now: Check the tire pressures and look over each tire, then book a tire balance and front-end inspection.

Why: Most steering wheel shakes come from the front tires and wheels. If those check out, the brakes and the steering and suspension parts are the next things a shop will usually test.

Possible causes: Tire out of balance; Bent wheel or damaged tire; Uneven brake rotors; Worn steering or suspension parts.

A shop will usually test: Wheel balance and runout check; Brake inspection; Steering and suspension inspection.

Related guides

Sources and references: National Highway Traffic Safety Administration (NHTSA)

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.