Cadillac Escaladeproblems, repair costs and recalls
Problems reported across 1999–2027. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
37 documented issues across all years, most serious first.
Ignition lock can bind (recall)
- What you'll notice
- The key is hard to turn or sticks in the start position. If it springs back to accessory, the engine can shut off while driving.
- Why it happens
- The ignition lock actuator can bind. If the engine shuts off, power steering and brake assist are lost and air bags may not deploy.
- What to do
- Check your VIN for this recall and have the lock housing replaced. If the key sticks, get it fixed before driving further.
Cylinder deactivation lifter failure
- What you'll notice
- A tapping or ticking from the engine, misfire codes, rough idle, check engine light, or loss of power.
- Why it happens
- The special lifters that let the engine shut off cylinders to save fuel can stick or collapse, which can wear the camshaft.
- What to do
- Get it diagnosed promptly. A collapsed lifter can damage the camshaft if you keep driving on it.
Reduced brake assist from vacuum pump (recall)
- What you'll notice
- The brake pedal suddenly feels hard and needs much more effort, and stopping distances get longer.
- Why it happens
- The engine-driven vacuum pump that powers the brake booster can lose output over time. The recall reprograms the brake module to add hydraulic assist when vacuum drops.
- What to do
- Check your VIN for open recalls. A hard brake pedal should be checked right away; drive gently until it is.
6.2L rod and crankshaft defect (recall)
- What you'll notice
- A knock that rises with engine speed, low oil pressure warnings, rough running, or sudden power loss or engine seizure.
- Why it happens
- Manufacturing defects in the crankshaft and connecting rods. GM recalled affected engines for inspection, with repair or replacement if needed and a thicker oil for engines that pass.
- What to do
- Check your VIN for open recalls. If the engine knocks or the oil pressure warning comes on, stop driving and have it towed.
Rear wheels can lock up (recall)
- What you'll notice
- A sudden rear-wheel lockup or skid while driving, sometimes with transmission warnings or reduced power.
- Why it happens
- A control valve in the 10-speed automatic can fail. GM recalled 2022 models (and 2021 diesels) for new transmission software.
- What to do
- Check your VIN for open recalls and get the free software update promptly.
Transfer case missing part (do-not-drive recall)
- What you'll notice
- Grinding or binding from under the vehicle, or a sudden lockup of the front or rear wheels.
- Why it happens
- A small number of 4WD and AWD vehicles were built with a part missing from the transfer case, which can lock the wheels without warning.
- What to do
- Check your VIN right away. If it is included, do not drive the vehicle until the dealer repairs it.
Battery cable can rub on the steering shaft (recall)
- What you'll notice
- A burning smell or smoke from under the hood, flickering electrics, or a no-start.
- Why it happens
- On some all-wheel-drive trucks the positive battery cable was not clipped in place. It can rub through on the steering shaft and short out, which can start a fire.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Power steering hose can split (recall)
- What you'll notice
- Red or amber fluid under the front, heavy steering, a hard brake pedal, or smoke from the engine bay.
- Why it happens
- A power steering hose that was not made to specification can crack. The fluid loss takes away steering and brake assist, and fluid on hot parts can catch fire.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Heated washer fluid module can overheat (recall)
- What you'll notice
- A hot plastic smell or smoke from the front of the engine bay, or washers that stop working.
- Why it happens
- The module that warms the washer fluid can short internally and overheat. GM recalled it twice and in the end removed the heater.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Rear axle can lock up (recall)
- What you'll notice
- A bang or grinding from the rear axle, then the rear wheels suddenly dragging or locking.
- Why it happens
- A pin inside the rear differential was not hardened correctly. It can break or slide out of place and jam the axle.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Shifter can move out of Park on its own (recall)
- What you'll notice
- The truck can be shifted out of Park with the key off or out, or rolls after parking.
- Why it happens
- A faulty park lock cable or steering column lock part may not hold the shifter in Park.
- What to do
- Use the parking brake every time you park, and have a Cadillac dealer do the free recall repair right away.
Power steering assist cuts out and snaps back (recall)
- What you'll notice
- The steering goes heavy for a moment and then the assist returns suddenly, most often at low speed.
- Why it happens
- A brief voltage drop can make the electric power steering shut off and then come back on abruptly.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Front airbags may not deploy (recall)
- What you'll notice
- Usually nothing beforehand; sometimes an airbag warning light.
- Why it happens
- A software fault in the airbag control module can leave it stuck in a self-test, so the front airbags and seat belt tighteners do not fire in a crash.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Front upper control arm weld can fail (recall)
- What you'll notice
- A clunk from the front end, loose or wandering steering, or a front wheel that looks tilted.
- Why it happens
- The weld holding the bushing to a front upper control arm may be too weak, so the arm can come apart from the bushing.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Fuel pump built without a pressure regulator (recall)
- What you'll notice
- A fuel smell, fuel dripping near the tank, or a check engine light.
- Why it happens
- Some in-tank fuel pumps were assembled without the pressure regulator, so pressure can climb high enough to cause a leak.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Rear driveshaft can break (recall)
- What you'll notice
- Vibration or a clunk from underneath, then the truck stops pulling even though the engine revs.
- Why it happens
- Parts inside the rear driveshaft missed their heat treatment and can fail.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Rear control arm bolts can snap (recall)
- What you'll notice
- A clunk from the rear, the truck steering itself from the back, or uneven rear tire wear.
- Why it happens
- Bolts for the rear outer control arms were not hardened correctly and can break, letting a rear wheel go out of line.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Front wheel hub bolts can loosen (recall)
- What you'll notice
- Clicking, a clunk or vibration from a front wheel, mainly on trucks with the largest factory wheels.
- Why it happens
- The wrong bolts may have been used on the front hubs. They can stretch or back out.
- What to do
- Do not put this off. Check the VIN with a Cadillac dealer and get the free repair done right away.
Lifter failure on the cylinder-deactivation V8
- What you'll notice
- A tick or clatter from the top of the engine that is loudest at idle, a misfire or rough running, the check engine light, and oil use between changes.
- Why it happens
- These V8s shut off half the cylinders to save fuel. The special lifters that do that can collapse or stick, and a collapsed lifter can round off the camshaft lobe it rides on.
- What to do
- Have it checked right away. Driving on a collapsed lifter usually ruins the camshaft and makes the repair much bigger.
Automatic can lose third and fourth gear
- What you'll notice
- The truck shifts late or slams, feels like it will not pull past low speed, and in bad cases loses drive altogether with the check engine light on.
- Why it happens
- Wear in the 4L60-E valve body and clutch packs; General Motors published service bulletins for these trucks on no third or fourth gear, loss of drive and updated valve body parts.
- What to do
- Have the fluid level and condition checked and the transmission codes read right away, because driving on a slipping automatic burns up the clutches.
ABS light from a failing brake control module
- What you'll notice
- ABS and brake warning lights stay on, stability messages appear, and ABS may kick in at low speed when it should not.
- Why it happens
- The ABS control module or its connections develop faults, and dirty wheel speed sensor mounting surfaces can send false signals. GM published bulletins for these codes.
- What to do
- Have the ABS codes read. Normal braking usually still works, but anti-lock protection may be off, so get it fixed soon.
Shudder from the 8-speed automatic
- What you'll notice
- A vibration like driving over rumble strips at steady cruising speeds with light throttle, plus harsh or clunky shifts.
- Why it happens
- The torque converter clutch shudders as it locks up. GM's fix is a complete fluid flush with a revised fluid; a top-off does not help.
- What to do
- Ask a dealer to check the transmission against the shudder bulletin. Note that the 8-speed arrived partway through 2015; earlier 2015s have a 6-speed.
Magnetic Ride shocks leaking
- What you'll notice
- Clunks over bumps, a harsh or bouncy ride, oily shock bodies, or a Service Suspension System message.
- Why it happens
- The electronically controlled shocks develop internal faults and leak.
- What to do
- Have the shocks inspected and ask about GM's bulletin for leaking shocks.
Steering and brake pedal suddenly get heavy (recall)
- What you'll notice
- The steering wheel and brake pedal take much more effort than normal, usually without warning.
- Why it happens
- A seal inside the hydraulic brake booster, which shares fluid with the power steering, can break because a bore was machined out of tolerance.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
Fuel pump control module lets water in (recall)
- What you'll notice
- The engine stalls, will not start, or cranks without firing, sometimes with a check engine light.
- Why it happens
- The seal on the fuel pump control module under the truck can come apart. Water then gets inside and the module stops running the fuel pump.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
Chassis control module can short out (recall)
- What you'll notice
- Stalling, a no-start, or warning lights that come and go.
- Why it happens
- Contamination inside the chassis electronic module, which runs the fuel pump, can cause an internal short.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
Fuel pump power module can quit (recall)
- What you'll notice
- The engine stalls while driving or will not restart.
- Why it happens
- The module that powers the fuel pump can fail, cutting fuel to the engine.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
Diesel models may have the wrong fuel tank (recall)
- What you'll notice
- Nothing in normal driving. The risk is a fuel leak after a rollover crash.
- Why it happens
- Some diesel trucks may have been built with a fuel tank that was not meant for them.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
No warning when brake fluid is low (recall)
- What you'll notice
- No brake warning light even though the fluid level has dropped; the pedal may feel soft or travel further.
- Why it happens
- Brake control software may fail to turn on the warning when fluid is lost.
- What to do
- Ask a Cadillac dealer to confirm the recall applies to the VIN and book the free recall repair if it is still open.
Harsh bang on the shift from first to second
- What you'll notice
- The change from first to second gear hits hard enough to rock the truck, and the check engine light comes on.
- Why it happens
- A line pressure control fault in the 4L60-E sets code P1870; General Motors covered it with service bulletins and revised valve body parts.
- What to do
- Get the stored codes read and the transmission inspected, since the hard shifts keep wearing the clutch packs.
Security light on with a stall or no start
- What you'll notice
- The security lamp lights up in the cluster and the engine either dies a few seconds after starting or cranks without ever running.
- Why it happens
- The Passlock anti-theft sensor in the ignition housing and its wiring lose contact, so the computer shuts the fuel off; General Motors bulletins cover this fault with code B2960.
- What to do
- Have the anti-theft system scanned for the stored code and the sensor or wiring repaired, then expect a relearn procedure afterwards.
ABS cycles on by itself at low speed
- What you'll notice
- Rolling up to a slow stop the pedal starts pulsing and the ABS buzzes as if a wheel were sliding, and the truck takes longer to stop.
- Why it happens
- The front wheel speed sensors and hub assemblies send a false signal at low speed; General Motors issued a bulletin on low-speed ABS activation and a revised wheel speed sensor procedure, and brakes are the most complained-about area on these two years.
- What to do
- Have the wheel speed sensors and front hubs checked soon, because the false activation lengthens your stopping distance.
Clunk from the steering intermediate shaft
- What you'll notice
- A clunk or knock felt through the steering wheel, most noticeable when turning slowly, parking, or going over small bumps.
- Why it happens
- The sliding steering shaft between the column and the steering gear wears and develops play. GM issued a long-running bulletin series that replaces the upper intermediate shaft.
- What to do
- Have the shaft checked for looseness. It is usually a noise annoyance, but any looseness in the steering should be inspected.
Gauge needles sticking or reading wrong
- What you'll notice
- The speedometer, fuel gauge, or other needles freeze, read wrong, or swing randomly, and the cluster may be slow to come on.
- Why it happens
- The tiny motors that move the gauge needles wear out on this generation's instrument cluster.
- What to do
- A cluster rebuild or replacement fixes it. Do not trust the speedometer or fuel gauge until it is repaired.
Door handles breaking off
- What you'll notice
- Inside or outside door handles snap or come loose, and the door may not open from one side.
- Why it happens
- The handle parts on early models of this generation are brittle and break with normal use.
- What to do
- Replace the broken handle. Make sure every door can still be opened from inside in case of an emergency.
A/C condenser leaking refrigerant
- What you'll notice
- The A/C blows warm, often coming back soon after a recharge, with oily residue at the front of the radiator area.
- Why it happens
- The combined A/C condenser and transmission cooler can crack from repeated heating and cooling. GM extended coverage on affected vehicles.
- What to do
- Ask a dealer whether your VIN is covered by the special coverage before paying for the repair.
Center screen going black
- What you'll notice
- The large curved display goes black with a warning symbol, and camera views and infotainment stop working.
- Why it happens
- Software glitches in the video processing module. GM issued a bulletin to reset and reprogram it.
- What to do
- Ask a dealer to check for the software update.
Repair prices for your Cadillac Escalade
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace or rebuild ABS electronic brake control module (EBCM)
- Rebuild instrument cluster (replace gauge stepper motors)
- Replace ignition lock housing
- Replace AFM/DFM lifters and camshaft
- Full transmission fluid exchange with updated ATF (per bulletin)
- Replace leaking Magnetic Ride shock
- Replace A/C condenser, evacuate and recharge
- Replace engine vacuum pump and update brake module software
- Replace engine (6.2L V8) after failed recall inspection
- Reset and reprogram video processing module
- Reprogram transmission control software
- Inspect transfer case and replace it if needed
- Secure and inspect battery cable
- Replace hydraulic brake booster (Hydro-Boost)
- Replace power steering pressure hose
- Remove heated washer fluid module
- Replace fuel pump control module
- Inspect rear differential and replace cross pin
- Replace park lock cable or steering column lock parts
- Replace chassis control module
- Update power steering software
- Reprogram airbag control module
- Inspect and replace front upper control arms
- Replace fuel pump module
- Replace fuel pump power control module
- Replace rear driveshaft
- Inspect and replace fuel tank
- Replace rear control arm bolts and align
- Update brake control module software
- Replace front hub bolts
- Replace failed lifters and camshaft
- Rebuild or replace the 4L60-E automatic transmission
- Replace the transmission valve body and gaskets
- Replace the Passlock sensor and relearn the system
- Replace a front wheel speed sensor or hub bearing assembly
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.