Home › Chevrolet › S-10 › 1999
My vehicle

Your 1999 Chevrolet S-10problems, repair costs and recalls

What we've documented about the 1999 Chevrolet S-10: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 1999134 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 3,000–5,000 miles · The 4.3L V6 holds about 4.5 quarts; the 2.2L four about 4.5 quarts.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–60,000 miles · 4WD trucks take a bit longer.
Price not verified
Ask for an estimate
Rear brake shoes and drumsAbout every 50,000–80,000 miles · Most S-10s use rear drum brakes.
Price not verified
Ask for an estimate
12V battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plugs and wiresAbout every 30,000–100,000 miles depending on plug type · On the 4.3L V6, check the distributor cap and rotor at the same time.
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 5 years or 150,000 miles (DEX-COOL)
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1999 Chevrolet S-10

13 documented issues apply to 1999, most serious first.

Stop soon1996–2004Transmission

Automatic transmission loses gears or reverse

What you'll notice
The truck slips between gears, flares in RPM, skips from 2nd to 4th, or suddenly has no reverse, 2nd or 4th gear. Fluid may smell burnt.
Why it happens
The four-speed automatic (4L60-E) in these trucks is known for worn 3-4 clutches and a sun shell (an internal drum and gear part) that can crack or strip, taking out several gears at once.
What to do
Check the fluid level and smell. If gears are missing or it slips, stop towing or hauling and get a transmission shop diagnosis; a rebuild with an upgraded sun shell is the usual fix.
Repair costInsufficient verified pricing for this vehicle and repair
Rebuild or replace 4L60-E automatic transmission. Prepare an itemized shop request.
Stop soon1996–2004Suspension

Lower ball joints wear out and can separate

What you'll notice
Clunking over bumps, wandering steering, uneven front tire wear or play in the front wheel. In the worst cases a joint breaks and the wheel folds under.
Why it happens
The front lower ball joints on these trucks wear early, especially on 4WD models. A badly worn joint can pull apart.
What to do
Have the front end checked for ball joint play at every tire rotation once the truck is past 50,000 miles. Replace worn joints right away and get an alignment.
Repair costInsufficient verified pricing for this vehicle and repair
Replace both front lower ball joints and align. Prepare an itemized shop request.
Stop soon1996–2004Engine4.3L V6

Intake manifold gasket leaks coolant

What you'll notice
Coolant goes missing with no puddle, the temperature gauge climbs, the oil looks milky, or there is a sweet smell. The engine may run rough.
Why it happens
The original intake manifold gaskets on the 4.3L V6 break down with heat and age and let coolant leak outside or into the engine.
What to do
Keep an eye on the coolant level. If it keeps dropping or the oil looks milky, stop driving and have the gaskets replaced before coolant damages the bearings.
Repair costInsufficient verified pricing for this vehicle and repair
Replace intake manifold gaskets and coolant. Prepare an itemized shop request.
Stop soon1996–2004Brakes

Rusted brake lines and frame

What you'll notice
A soft or sinking brake pedal, brake fluid drips near the wheels or under the cab, or heavy rust on the frame and bed mounts.
Why it happens
The steel brake lines and frame rust badly on trucks in snow and salt states. A line can rust through and burst under hard braking.
What to do
Have the brake lines and frame inspected, especially if you live where roads are salted. Replace rusted lines before they fail.
Repair costInsufficient verified pricing for this vehicle and repair
Replace rusted brake lines (preformed line set) and bleed brakes. Prepare an itemized shop request.
Get checked1996–2002Fuel4.3L V6

Central "spider" fuel injector sticks or leaks

What you'll notice
Rough idle right after starting, especially after sitting overnight, long cranking, misfires and a check engine light.
Why it happens
These 4.3L engines use one central injector unit with small poppet valves feeding each cylinder. Deposits make the poppets stick, and the unit can leak fuel inside the intake.
What to do
Have the misfire codes and fuel pressure checked. Replacing the central injector unit (many shops fit the later multi-port style) usually cures it.
Repair costInsufficient verified pricing for this vehicle and repair
Replace central (spider) fuel injector assembly. Prepare an itemized shop request.
Get checked1996–2004Drivetrain

Rear differential whine or groan

What you'll notice
A whine, whir or groan from the back of the truck that gets louder with speed, sometimes with oil seeping from the axle seals.
Why it happens
Bearings and gears in the rear axle wear, often after fluid leaks from the pinion or axle seals. Left alone, the noise grows until the differential fails.
What to do
Check the rear axle fluid level and look for leaks. A shop can tell axle noise from tire or wheel bearing noise; catching it early can save a full rebuild.
Repair costInsufficient verified pricing for this vehicle and repair
Rebuild rear differential (bearings, seals, gear setup). Prepare an itemized shop request.
Walk through this symptom: Whining noise when accelerating →
Get checked1998–2004Electrical

Instrument cluster gauges stop working

What you'll notice
The speedometer, fuel, temperature or tach gauges stop working, read wrong, or the whole cluster goes dark while driving.
Why it happens
The gauge motors and solder joints inside the cluster wear out, and loose connections in the dash wiring can cut power to the cluster.
What to do
Have the cluster tested. Repair shops can replace the gauge motors or rebuild the cluster for much less than a new one.
Repair costInsufficient verified pricing for this vehicle and repair
Rebuild instrument cluster or replace gauge motors. Prepare an itemized shop request.
Get checked1996–2004Electrical

Key won't turn or ignition switch fails

What you'll notice
The key is hard to turn or won't turn at all, gets stuck in the ignition, or the truck won't crank even though the battery is good.
Why it happens
The ignition lock cylinder wears with use, and the electrical ignition switch on the column can fail.
What to do
Don't force the key. A locksmith or shop can replace the lock cylinder or switch; bring all your keys.
Repair costInsufficient verified pricing for this vehicle and repair
Replace ignition lock cylinder and/or ignition switch. Prepare an itemized shop request.
Walk through this symptom: Key won't turn in the ignition →
Get checked1996–2004Engine4.3L V6

Misfire from worn distributor cap and rotor

What you'll notice
Misfires, a flashing or steady check engine light, rough idle, hesitation or hard starting.
Why it happens
The plastic distributor cap on the 4.3L V6 sits in a hot spot and can warp, crack or rub the rotor. Worn spark plug wires cause similar misfires.
What to do
Have the cap, rotor and plug wires inspected. Replacing them is a cheap first step for misfires on this engine.
Repair costInsufficient verified pricing for this vehicle and repair
Replace distributor cap, rotor and spark plug wires. Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Monitor1996–2004HVAC

Heater fan works only on high

What you'll notice
The blower fan works on the highest setting only, or not at all on some speeds.
Why it happens
The blower motor resistor, which sets the lower fan speeds, burns out. A worn blower motor can overload it.
What to do
Replace the blower resistor; if the fan motor is noisy or slow, replace it too so the new resistor doesn't fail again.
Repair costInsufficient verified pricing for this vehicle and repair
Replace blower motor resistor (and blower motor if worn). Prepare an itemized shop request.
Monitor1996–2004Engine4.3L V6

Oil pressure gauge drops or jumps

What you'll notice
The oil pressure gauge reads zero, swings around, or the oil light flickers while the engine sounds normal. The sensor may also leak oil.
Why it happens
The oil pressure sender on the 4.3L V6 often fails or leaks. Real low oil pressure is less common, but it has to be ruled out.
What to do
Check the oil level first. Have a shop test the pressure with a mechanical gauge; if it's fine, replacing the sender fixes the reading.
Repair costInsufficient verified pricing for this vehicle and repair
Replace oil pressure sender. Prepare an itemized shop request.
Monitor1996–2004Engine4.3L V6

Engine knock or ping on the 4.3L V6

What you'll notice
A light knocking or pinging sound from the engine, often under load or when accelerating.
Why it happens
Knock has been widely reported on this generation of the 4.3L V6. Causes include carbon buildup, low-octane fuel and, in some engines, piston wear.
What to do
Try a tank of better fuel and a carbon cleaning first. If the knock is deep or gets worse, have a shop check for internal wear.
Repair costInsufficient verified pricing for this vehicle and repair
Carbon cleaning and knock diagnosis. Prepare an itemized shop request.
Walk through this symptom: Engine knocking or pinging →
Monitor1996–2004Body

Doors sag from worn hinge pins

What you'll notice
Doors drop when opened, have to be lifted to latch, or pop and creak when opening and closing.
Why it happens
The door hinge pins and bushings wear out over time, especially on the heavy driver's door.
What to do
Replace the hinge pins and bushings with an inexpensive kit before the worn hinge wears the door striker.
Repair costInsufficient verified pricing for this vehicle and repair
Replace door hinge pins and bushings (one door). Prepare an itemized shop request.
Price guide

Repair prices for your 1999 Chevrolet S-10

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Rebuild or replace 4L60-E automatic transmission
  • Replace both front lower ball joints and align
  • Replace intake manifold gaskets and coolant
  • Replace central (spider) fuel injector assembly
  • Rebuild rear differential (bearings, seals, gear setup)
  • Replace rusted brake lines (preformed line set) and bleed brakes
  • Rebuild instrument cluster or replace gauge motors
  • Replace ignition lock cylinder and/or ignition switch
  • Replace blower motor resistor (and blower motor if worn)
  • Replace oil pressure sender
  • Replace distributor cap, rotor and spark plug wires
  • Carbon cleaning and knock diagnosis
  • Replace door hinge pins and bushings (one door)
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1999 Chevrolet S-10
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1999 Chevrolet S-10 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.