Home › Chrysler › Town & Country › 2012
My vehicle

Your 2012 Chrysler Town & Countryproblems, repair costs and recalls

What we've documented about the 2012 Chrysler Town & Country: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 201274 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 5,000–8,000 miles or when the oil indicator says
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–50,000 miles
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 40,000–70,000 miles · Some older vans have rear drum brakes, so the job is shoes instead of pads.
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3–5 years · On 2008+ vans the battery is tucked in tight and parts may need to come off to reach it.
Price not verified
Ask for an estimate
Spark plug replacementAbout every 100,000 miles · 3.6 V6 (2011+) rear plugs need the upper intake removed.
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 5–10 years or 100,000–150,000 miles
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2012 Chrysler Town & Country

7 documented issues apply to 2012, most serious first.

Stop soon2008–2012Electrical

Integrated power module (TIPM) failure

What you'll notice
No-start, stalling in traffic, a fuel pump that keeps running, wipers or horn acting on their own, or overnight battery drain.
Why it happens
The under-hood power module that runs many relays and circuits, including the fuel pump relay, can fail internally.
What to do
Have the module diagnosed before replacing starters, fuel pumps or batteries. Stalling is a safety risk, so don't put it off.
Repair costInsufficient verified pricing for this vehicle and repair
Replace and program integrated power module (TIPM). Prepare an itemized shop request.
Stop soon2010–2014Electrical

Driver door vent window switch can overheat

What you'll notice
A burning smell, melted plastic or smoke near the driver's door armrest, or a vent window switch that stops working.
Why it happens
The switch for the rear vent windows in the driver's armrest could overheat, especially if liquids got into it, and start a fire. Chrysler recalled these vans.
What to do
Check the VIN for recall 14V234. If you smell burning near the door, park and have it inspected before driving again.
Repair costInsufficient verified pricing for this vehicle and repair
Replace vent window switch and add jumper harness. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Stop soon2012Engine3.6L Pentastar V6

Debris in the engine can ruin rod bearings

What you'll notice
Knocking from the engine, low oil pressure warning, or the engine seizing.
Why it happens
Some engines built in late summer 2011 had debris left in the block that could damage the connecting rod bearings. Chrysler recalled them.
What to do
Check the VIN for recall 11V487. If you hear knocking, stop driving and have it towed.
Repair costInsufficient verified pricing for this vehicle and repair
Replace engine (3.6L Pentastar). Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Stop soon2012Suspension

Right rear wheel hub may not be fully machined

What you'll notice
Grinding, humming or a wobbling right rear wheel.
Why it happens
Some right rear hub and bearing units on vans built in November 2011 were not fully machined and could allow the wheel to separate. Chrysler recalled them.
What to do
Check the VIN for recall 12V141. If a rear wheel feels loose or noisy, stop driving and have it inspected.
Repair costInsufficient verified pricing for this vehicle and repair
Replace right rear wheel hub and bearing. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Get checked2011–2016Transmission

Harsh shifting, slipping or limp mode from the six-speed automatic

What you'll notice
Hard or delayed shifts, slipping, jerking, whining, slow engagement into gear, or being stuck in a single gear.
Why it happens
The six-speed automatic draws many complaints for shift quality, solenoid and electronic faults that trigger limp mode, and internal wear.
What to do
Have trouble codes read and the fluid checked soon. Ask a dealer about software updates; solenoid faults are often repairable without a full rebuild.
Repair costInsufficient verified pricing for this vehicle and repair
Replace transmission solenoid pack and update software. Prepare an itemized shop request.
Walk through this symptom: Harsh or late shifting →
Get checked2011–2013Engine3.6L Pentastar V6

Misfires from a failing left cylinder head

What you'll notice
Check engine light with misfire codes on the driver-side bank, a rough idle and ticking.
Why it happens
The left cylinder head on early 3.6L engines can develop valve seat wear or cracks and lose compression. Chrysler extended warranty coverage on the left head to 10 years or 150,000 miles.
What to do
Ask a dealer whether your VIN is covered by the cylinder head warranty extension before paying for repairs.
Repair costInsufficient verified pricing for this vehicle and repair
Replace left cylinder head (3.6L Pentastar). Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Walk through this symptom: Engine sputters or misfires →
Monitor2009–2012Electrical

Blind spot monitoring stops working

What you'll notice
Blind spot warning lights that stay off, give false alerts, or show a system fault message.
Why it happens
The rear blind spot sensors on upper trims can fail, and replacement is costly.
What to do
Have the sensors checked. Until repaired, rely on mirrors and shoulder checks before changing lanes.
Repair costInsufficient verified pricing for this vehicle and repair
Replace blind spot sensor module. Prepare an itemized shop request.
Price guide

Repair prices for your 2012 Chrysler Town & Country

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace transmission solenoid pack and update software
  • Replace and program integrated power module (TIPM)
  • Replace vent window switch and add jumper harness
  • Replace left cylinder head (3.6L Pentastar)
  • Replace engine (3.6L Pentastar)
  • Replace right rear wheel hub and bearing
  • Replace blind spot sensor module
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2012 Chrysler Town & Country
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2012 Chrysler Town & Country as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.