Your 2013 Dodge Dartproblems, repair costs and recalls
What we've documented about the 2013 Dodge Dart: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2013 Dodge Dart
18 documented issues apply to 2013, most serious first.
Engine stalls or dies while driving
- What you'll notice
- The engine cuts out at stop signs, in turns or while merging onto the highway, sometimes with the battery or check engine light flashing. Power steering and brake assist go heavy, and it may take several tries to restart.
- Why it happens
- Most reports involve the 2.4L engine. Low oil from oil burning is a common finding, and some cars needed engine computer updates or electrical repairs; a few had internal engine damage and got a new engine.
- What to do
- Check the oil level right away and keep it full. Ask the dealer about software updates and have the oil consumption, battery and charging system tested. Report repeated stalling to NHTSA.
Excessive oil consumption
- What you'll notice
- You have to add a quart of oil every 500-1,000 miles, the dipstick reads low between changes, and in some cases the engine stalls, rattles or smells burnt.
- Why it happens
- The 2.4L Tigershark engine can burn oil internally; one dealer found scored cylinder walls. Some cars got replacement engines under the powertrain warranty.
- What to do
- Check the oil at every fill-up. Ask the dealer for an oil consumption test and keep records, as they may support a warranty or goodwill engine repair.
Automatic transmission stops working or goes into limp mode
- What you'll notice
- A 'service transmission' light, the car dropping into neutral or refusing to engage a gear, limp mode with low speed, rough shifts or grinding.
- Why it happens
- Causes reported include failed transmission computers and valve bodies, broken shift cable brackets or linkage, poor ground connections and internal failure. Two recalls also cover a shift cable bushing and a transmission computer fault.
- What to do
- Get it to a safe place and have codes read before agreeing to a new transmission. Check your VIN for the shifter cable and transmission computer recalls first.
Clutch pedal sticks to the floor (manual)
- What you'll notice
- On manual-transmission cars the clutch pedal stays down or sticks, you can't shift, and the car may stall. It comes and goes and can be worse in heat.
- Why it happens
- The clutch hydraulic system (master cylinder and line to the slave cylinder) loses pressure. A Chrysler service bulletin added a new-style master cylinder and line.
- What to do
- Pull over safely if it happens. Ask the dealer about the clutch master cylinder service bulletin; a full clutch replacement may not be needed.
Turbocharger failure
- What you'll notice
- Check engine light, knocking from the engine bay, poor or on-and-off acceleration, a noisy turbo or white smoke.
- Why it happens
- The 1.4L turbo or its control sensor and solenoid fail, sometimes at low mileage.
- What to do
- Use the correct 5W-40 synthetic oil and change it on time. Have the turbo control parts tested before replacing the whole turbo; ask about warranty coverage.
Engine revs up while stopped with foot on the brake
- What you'll notice
- While stopped, the engine suddenly revs high, sometimes to redline, and the car feels like it wants to move.
- Why it happens
- No single cause has been confirmed; most reports involve the 1.4L turbo with the automatic. Dealers often couldn't reproduce it.
- What to do
- Hold the brake firmly and shift to neutral if it happens. Document each event, report it to NHTSA and ask the dealer for software updates.
Coolant leak and overheating
- What you'll notice
- The temperature gauge climbs, a coolant warning appears, and you may see coolant under the car or smell it.
- Why it happens
- Coolant leaks, often from a heater hose, let the level drop until the 2.0L engine overheats.
- What to do
- Stop if the gauge goes into the red. Check the coolant level often and have any leak fixed quickly to avoid head gasket damage.
Shifter cable can come off the transmission (recall)
- What you'll notice
- The gear you pick doesn't match what the car does, or the car can roll away after you select Park.
- Why it happens
- The bushing that holds the shifter cable to the 6-speed automatic can fail. Recall 19V-293 covers 2013-2016 Darts with that transmission.
- What to do
- Always use the parking brake until the recall is done. Ask the dealer to check your VIN for open recalls; the dealer replaces the bushing for free.
Transmission can shift into neutral (recall)
- What you'll notice
- The car suddenly loses drive as the transmission drops into neutral.
- Why it happens
- The transmission control module can fail. Recall 15V-542 replaces the module and its bracket on cars built from 2012 to mid-2015.
- What to do
- Check your VIN for this recall; the repair is free.
Oil can damage the brake booster (recall)
- What you'll notice
- The brake pedal gets harder to press and the car takes longer to stop.
- Why it happens
- Oil from the engine's vacuum pump can seep into the brake booster and damage it, reducing brake assist. Recall 15V-800.
- What to do
- If the pedal feels hard, get it checked right away. Check your VIN; the dealer replaces the vacuum line, and the booster and pump too if oil is found.
Jerky or rough shifting from the dual-clutch automatic
- What you'll notice
- Jerky take-offs, hesitation, harsh or delayed shifts and a jumpy feel at low speed in stop-and-go traffic.
- Why it happens
- The 1.4L turbo was paired with a dual dry-clutch automated manual, which reviewers flag as the most trouble-prone transmission in the Dart.
- What to do
- Ask the dealer about transmission software updates and have the clutch adaptation checked. If buying used, test-drive it in traffic.
Check engine light from misfires and ignition coils
- What you'll notice
- The check engine light comes and goes, sometimes flashing, with rough running or a misfire on one cylinder.
- Why it happens
- Failed ignition coils, sensors and wiring are common causes. Chrysler also issued an engine computer update for several codes on 2013-2015 2.4L cars.
- What to do
- A flashing light means stop driving hard and get it checked soon. Have the codes read; a coil is a fairly cheap fix.
Thermostat failure turns on check engine light
- What you'll notice
- The check engine light comes on (often code P0128), especially in cold weather, and the heater may be slow to warm up.
- Why it happens
- The thermostat sticks open so the engine doesn't reach normal temperature. An engine computer update may also be needed.
- What to do
- Not urgent, but get it fixed so the engine and heater work properly. Ask the dealer whether a software update applies.
Wipers stay on or won't shut off
- What you'll notice
- The windshield wipers keep running or don't respond properly to the switch.
- Why it happens
- A flat ribbon wire inside the steering column control module (SCCM) fails.
- What to do
- Have a dealer or experienced shop do it, because the airbag and steering wheel must come off. The module may need programming.
Oil pressure sensor sets check engine light
- What you'll notice
- Check engine light with code P0520, with no real oil pressure problem.
- Why it happens
- A faulty oil pressure sensor. Chrysler service bulletin 18-034-14 calls for replacing the sensor.
- What to do
- Check the oil level first to rule out a real problem, then have the sensor replaced; the part is inexpensive.
Uconnect screen goes blank or radio shuts off
- What you'll notice
- The touchscreen goes blank, the radio shuts off or resets, Bluetooth won't connect, or the backup camera display fails.
- Why it happens
- Software glitches in the Uconnect system. Chrysler released updates, and some faults clear after a reset.
- What to do
- Install the latest Uconnect software update. Disconnecting the battery briefly can reset it; a dealer can replace the unit if it keeps failing.
Creaking or squeaking when turning
- What you'll notice
- A creak or squeak from the front when turning the steering wheel, especially at low speeds.
- Why it happens
- The upper strut mounts dry out and bind. Chrysler service bulletin 02-004-15 covers lubricating them.
- What to do
- Ask a dealer to apply the strut mount service bulletin. It is not a safety problem but should be checked if it gets worse.
Sun visor breaks and hangs down
- What you'll notice
- The sun visor snaps at the hinge and dangles, sometimes by its wires, which can also knock out the interior lights.
- Why it happens
- The plastic around the visor hinge is brittle and cracks with normal use.
- What to do
- Replacement visors are inexpensive and easy to install. Ask the dealer if your car is still under warranty.
Repair prices for your 2013 Dodge Dart
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Diagnose stalling; software update or electrical repair
- Oil consumption test; engine or short block replacement if confirmed
- Repair shift linkage or wiring, or replace transmission
- Transmission software update or clutch adaptation; clutch pack if worn
- Replace clutch master cylinder and line
- Replace turbocharger
- Diagnose idle surge; throttle or software repair
- Replace ignition coil and spark plugs
- Replace thermostat
- Replace heater hose and refill coolant
- Replace oil pressure sensor
- Replace steering column control module (SCCM)
- Uconnect software update or radio replacement
- Lubricate upper strut mounts
- Replace sun visor
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace shifter cable bushingNo charge if your vehicle is included
- Replace transmission control module and bracketNo charge if your vehicle is included
- Replace vacuum line; brake booster and pump if contaminatedNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…