Ford F-350 Super Dutyproblems, repair costs and recalls
Problems reported across 1999–2026. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
35 documented issues across all years, most serious first.
Head gasket failure linked to oil cooler and EGR cooler problems
- What you'll notice
- Coolant level keeps dropping, coolant is pushed out of the overflow bottle, white smoke from the exhaust, overheating when towing, or engine temperature that climbs on hills.
- Why it happens
- On the 6.0L diesel, the engine oil cooler clogs and starves the EGR cooler of coolant flow. The EGR cooler then cracks and leaks coolant, and the stock head bolts can let combustion pressure push past the head gaskets, especially under heavy towing.
- What to do
- Stop towing and get it checked before you overheat it again. Ask a diesel shop to compare oil and coolant temperatures and pressure-test the cooling system. Catching a clogged oil cooler early is far cheaper than head gaskets.
Major engine failure or sudden power loss on the 6.4L diesel
- What you'll notice
- The truck suddenly loses power, often while towing, or runs rough and won't make power. Some owners were told the whole engine needed replacing.
- Why it happens
- The 6.4L diesel is known for expensive problems: fuel and water reaching the high-pressure fuel system, cracked exhaust parts, cooling system leaks and fuel thinning the oil. When these are ignored the engine can be badly damaged.
- What to do
- If power drops while towing, pull over safely and stop. Have a diesel specialist scan for codes and check the fuel-water separator, oil level and coolant level before replacing big parts.
High-pressure fuel pump (CP4) failure
- What you'll notice
- The truck stalls or loses power and then cranks but won't start. Repairs are often very expensive because metal debris spreads through the fuel system.
- Why it happens
- The Bosch CP4 high-pressure pump on the 6.7L diesel can wear internally, and many technicians blame low lubricity in US diesel fuel or water in the fuel. Metal flakes then travel to the injectors and fuel lines.
- What to do
- Have it towed rather than cranking it over and over. Ask the shop to check the fuel filters for metal. Change both fuel filters on time and drain water from the separator to lower the risk.
Fuel injector failure on the 6.0L diesel
- What you'll notice
- Rough idle, misfire, smoke, hard starting or loss of power, sometimes after a long period of running fine.
- Why it happens
- 6.0L injectors are sensitive to fuel quality, oil condition and weak batteries feeding the injector control module. When injectors stick or wear, the engine misfires and can wash fuel into the oil.
- What to do
- Get a diesel shop to run an injector balance and contribution test before replacing parts. Test the batteries and the injector control module voltage too, because a weak module can make good injectors act up.
Spark plug blown out of the cylinder head
- What you'll notice
- A sudden loud popping or ticking like a tapping hammer, rough running and a misfire on one cylinder. You may see the coil pack lifted or hear exhaust puffing from under the hood.
- Why it happens
- The 5.4L and 6.8L V10 gas engines in these trucks have very few threads holding each spark plug in the aluminum head. Over time a plug can work loose and shoot out, stripping the threads.
- What to do
- Stop driving it to avoid more damage, since it will run poorly and can damage the coil. A shop can usually repair the threads with an insert without removing the head. When plugs are changed, make sure they are torqued correctly.
Turbocharger failure on early 6.7L diesels
- What you'll notice
- A loud screech or whine from the engine, blue or gray smoke from burning oil, and loss of power.
- Why it happens
- Early 6.7L diesels used a turbo with ceramic ball bearings that could fail. Ford later moved to a steel-bearing design.
- What to do
- Stop driving if you hear screeching or see heavy smoke, because a failing turbo can send parts into the engine. Have a diesel shop inspect the turbo for shaft play and oil leaks.
Camshaft position sensor can stall the engine (recall)
- What you'll notice
- The engine stalls without warning while driving, or cranks but won't start, often when hot. The tachometer may drop to zero just before it dies.
- Why it happens
- The camshaft position sensor on the 7.3L diesel can work only some of the time. When it drops out, the engine loses its timing signal and shuts off.
- What to do
- Treat an unexpected stall as a safety problem. Check your VIN for open recalls; the dealer replaces the sensor with an improved part for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Speed control deactivation switch can overheat and catch fire (recall)
- What you'll notice
- A burning smell or smoke near the brake master cylinder on the driver's side of the engine bay, or cruise control that stops working. A fire can start even with the engine off.
- Why it happens
- The cruise control shut-off switch near the brake master cylinder can leak brake fluid internally, then overheat and burn.
- What to do
- If you smell burning or see smoke, park outside away from buildings. Check your VIN; the dealer adds a fused wiring harness for free. Ford recommends parking outside until it's done.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Automatic transmission failure
- What you'll notice
- Slipping, harsh or delayed shifts, loss of second gear, fluid leaks, or the truck refusing to move. Some owners had a second failure on the replacement unit.
- Why it happens
- The heavy-duty 4-speed automatic in these trucks wears out early under towing and heavy loads, and seal leaks can let it run low on fluid and burn up.
- What to do
- Check the fluid level and smell for burnt fluid. If it slips, stop towing and get it diagnosed before it fails completely. An extra transmission cooler helps trucks that tow often.
Driveshaft damper can slip and break the driveshaft (recall)
- What you'll notice
- A vibration or clunk from under the truck that gets worse, then a sudden loss of power to the wheels. The truck may roll in Park if the parking brake isn't set.
- Why it happens
- On 4x4 trucks, a ring-shaped damper on the rear driveshaft can shift. That unbalances the driveshaft until it breaks.
- What to do
- Always set the parking brake when parked. Check your VIN; the dealer inspects and repairs the driveshaft for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Underbody insulator can wear through the aluminum driveshaft (recall)
- What you'll notice
- Rubbing or scraping noises from under the cab, then vibration. If the driveshaft breaks, the truck suddenly loses drive power.
- Why it happens
- On gas-engine trucks with an aluminum driveshaft, underbody heat or sound insulators can come loose and rub on the spinning driveshaft until it fractures.
- What to do
- Check your VIN. The dealer inspects the driveshaft, replaces it if damaged, and reattaches the insulators for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Dana 275 rear axle housing can bend and drop the driveshaft (recall)
- What you'll notice
- Clunks or vibration from the rear, especially after heavy towing, then a sudden loss of drive power. The truck may roll if left in Park without the parking brake.
- Why it happens
- On F-350 diesel trucks with the Dana 275 rear axle, the axle housing can deform under load. That can let the driveshaft separate from the axle.
- What to do
- Set the parking brake every time you park. Check your VIN; the dealer inspects and repairs the axle for free. Avoid heavy towing until it's checked.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Dual rear wheel front hub extenders can come loose (recall)
- What you'll notice
- Clicking, wobble or vibration from a front wheel on a dually. In the worst case a front wheel can come off.
- Why it happens
- Dual rear wheel F-350s use hub extenders on the front wheels so they line up with the wide rear wheels. The fasteners holding the extenders may not be tight enough.
- What to do
- Ford tells owners not to drive these trucks until they are fixed. Check your VIN and have the truck towed to a dealer if the recall is open.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Fifth-wheel hitch bracket can crack (recall)
- What you'll notice
- Creaking or clunking from the bed when towing a fifth-wheel or gooseneck trailer, or visible cracks near the left-side hitch mount.
- Why it happens
- On some 2021 F-350s with the factory fifth-wheel prep, the left mounting bracket can crack, so the hitch could come loose while towing.
- What to do
- Don't tow a fifth-wheel or gooseneck trailer until the recall is checked. Check your VIN; the dealer inspects and replaces the bracket for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Left rear axle shaft may break (recall)
- What you'll notice
- Grinding or clunking from the rear wheel, then a sudden loss of drive. The truck could roll away in Park without the parking brake.
- Why it happens
- On 2023 single rear wheel trucks, the left rear axle shaft may not have been heat-treated correctly and can snap.
- What to do
- Use the parking brake every time you park. Check your VIN; the dealer inspects and replaces the axle shaft for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Rear driveshaft weld can fail (recall)
- What you'll notice
- A clunk or vibration from under the truck followed by a sudden loss of power to the wheels.
- Why it happens
- A friction weld on the rear driveshaft may not be strong enough and can separate.
- What to do
- Set the parking brake when parked. Check your VIN; the dealer inspects and replaces the driveshaft for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Right rear axle shaft may break (recall)
- What you'll notice
- Grinding or clunking from the rear wheel, then a sudden loss of drive power, or the truck rolling in Park.
- Why it happens
- The right rear axle shaft may not have been heat-treated properly and can break.
- What to do
- Set the parking brake every time you park. Check your VIN; the dealer inspects and replaces the axle shaft for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Truck can briefly move in reverse when shifted to Drive (recall)
- What you'll notice
- When you shift from Park to Drive, the truck lurches backward for a second or two even though the display shows D.
- Why it happens
- A transmission software fault on some early-build 2015 trucks with the 6R140 automatic can engage Reverse for about 1.5 seconds.
- What to do
- Keep your foot firmly on the brake when shifting. Check your VIN; the dealer updates the transmission software for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Violent front-end shake ('death wobble')
- What you'll notice
- After hitting a bump or expansion joint at highway speed, the steering wheel and front end shake violently and won't stop until you slow way down.
- Why it happens
- The solid front axle uses a track bar, ball joints and a steering damper. Wear, loose parts, caster settings or out-of-balance tires let the front wheels start oscillating, and the motion feeds on itself.
- What to do
- Firmly hold the wheel and slow down gradually; don't slam the brakes. Have the track bar, ball joints, tie rods, steering damper and alignment checked. Ask the dealer about Ford's steering damper program and service bulletins for your year.
Steering column upper shaft can separate (recall)
- What you'll notice
- Loose or vague steering, clunks in the steering wheel, or the wheel turning without the truck responding.
- Why it happens
- The upper steering column shaft can detach from the rest of the column, which can cause a loss of steering.
- What to do
- If the steering feels loose, stop driving and have it towed. Check your VIN; the dealer inspects and repairs it for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Steering column shaft bolts may be loose or missing (recall)
- What you'll notice
- Clunking or play in the steering wheel, or steering that feels disconnected.
- Why it happens
- On some 2023 trucks, bolts joining the upper steering column shaft were left loose or not installed, so the column can come apart.
- What to do
- Don't ignore a loose-feeling steering wheel. Check your VIN; the dealer tightens or installs the bolts for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Brake booster pushrod clip may be missing (recall)
- What you'll notice
- The brake pedal feels odd or suddenly goes soft, and braking power drops.
- Why it happens
- A retaining clip on the brake booster pushrod may be missing, so the pushrod can come apart from the brake pedal.
- What to do
- Ford tells owners not to drive these trucks until repaired. Check your VIN and have it towed to a dealer if the recall is open.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Trailer brakes or trailer lights can cut out (recall)
- What you'll notice
- A trailer brake warning on the dash, or the trailer's brakes, brake lights or turn signals stop working while towing.
- Why it happens
- The integrated trailer brake module can lose communication with the truck because of a software problem, cutting trailer braking or lights.
- What to do
- If the warning appears while towing, slow down, leave extra stopping distance and pull over safely. Check your VIN; the fix is a free software update from the dealer or over the air.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
High-pressure fuel pump can fail from biodiesel deposits (recall)
- What you'll notice
- The engine loses power or stalls while driving, sometimes with a check engine light.
- Why it happens
- Deposits from biodiesel blends can build up in the 6.7L diesel's high-pressure fuel pump and make it fail. A first repair was not done correctly on some trucks, so Ford issued a follow-up recall.
- What to do
- Check your VIN for both recalls; the dealer updates engine and transmission software for free. If power drops, pull over safely and have it checked.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Seat belt pretensioner can start a fire in the door pillar (recall)
- What you'll notice
- Smoke or burning smell inside the cab, usually after a crash or minor impact that fires the seat belt pretensioner.
- Why it happens
- On Crew Cab trucks, sparks from the front seat belt pretensioner can ignite carpet or insulation inside the B-pillar.
- What to do
- If you smell smoke in the cab, get out and stay clear. Check your VIN; the dealer adds heat-resistant tape and insulation changes for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Instrument cluster may go blank or gauges stick (recall)
- What you'll notice
- The dash may not light up at startup, so you can't see speed or warning lights, or the analog speedometer and tachometer needles stick or jump.
- Why it happens
- Software and hardware problems in the instrument cluster can stop it from starting up properly or make the gauges read wrong.
- What to do
- Don't drive if the cluster is blank, because you won't see warnings. Check your VIN; Ford provides a software update and, for the gauge issue, a new cluster.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Radiator leaks at the end tanks on the 6.4L diesel
- What you'll notice
- Puddles of coolant under the front of the truck, a sweet smell, or the coolant level dropping between checks.
- Why it happens
- The crimped seams that hold the plastic end tanks to the radiator core loosen over time, mostly on early-build trucks, and start to seep coolant.
- What to do
- Check the coolant level often and don't let it run low, because overheating a diesel is very costly. Replace the radiator when it starts leaking and pressure-test the rest of the system.
Fuel thinning the engine oil during DPF cleaning
- What you'll notice
- The oil level on the dipstick keeps going up, the oil smells like diesel, and fuel economy drops.
- Why it happens
- To clean its diesel particulate filter (DPF), the 6.4L injects extra fuel late in each cycle. Some of that fuel slips past the piston rings into the oil, thinning it. Short trips and long idling make it worse.
- What to do
- Check the oil level often and change the oil sooner than the normal interval if it's rising. Use low-ash diesel oil and ultra-low-sulfur diesel. Highway runs let the DPF clean itself more completely.
Fuel tank lining flakes and clogs the fuel filter
- What you'll notice
- The truck loses power or stalls, especially under load, and fuel filters clog again soon after being changed. Shops may find gray flakes in the filter.
- Why it happens
- The coating inside the steel diesel fuel tank on these heavy-duty Ford trucks can separate and peel. The flakes clog the filter and can damage the fuel pump and injectors.
- What to do
- If the fuel filter clogs often, ask the shop to inspect it for flakes. Replacing the tank, often with an aftermarket plastic tank, plus new filters, stops it coming back.
4x4 front hubs won't lock or unlock
- What you'll notice
- Four-wheel drive doesn't engage, or the front hubs stay locked when they shouldn't, causing grinding or binding. The plastic hub caps can crack.
- Why it happens
- These trucks use vacuum-operated automatic locking hubs. Cracked plastic hub parts, vacuum leaks and worn bearings stop them from working as designed.
- What to do
- Have the vacuum lines and hub assemblies checked. Many owners switch to manual locking hubs for reliability. Don't count on 4x4 in snow or off-road until it's fixed.
DEF tank heater or DEF system fault
- What you'll notice
- A check engine or DEF warning, sometimes with code P20BA, and a countdown that limits speed if not fixed.
- Why it happens
- The heater inside the diesel exhaust fluid (DEF) tank, which keeps the fluid from freezing, can fail. The truck then can't run its emissions system correctly.
- What to do
- Don't ignore the warning, because the truck may go into reduced speed mode. Have a shop read the codes; the heater is usually replaced with the DEF tank sending unit.
Tailgate can open on its own (recall)
- What you'll notice
- The tailgate drops open while driving or parked, and cargo can fall out.
- Why it happens
- Water can get into the electric tailgate release switch and short it, unlatching the tailgate.
- What to do
- Strap down loads until fixed. Check your VIN; the dealer rewires and replaces the switch for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Water in tailgate module blanks the backup camera (recall)
- What you'll notice
- The backup camera image flickers or turns blue or black when in Reverse.
- Why it happens
- Water can get into the tailgate park-assist module, disrupting the rear camera signal.
- What to do
- Use mirrors and look behind you until fixed. Check your VIN; the dealer replaces the camera, harness and module for free.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Backup camera image freezes or is delayed (recall)
- What you'll notice
- The rear camera picture is delayed, freezes or stays blank when you shift into Reverse.
- Why it happens
- A software error in the module that handles the camera feed can stop the image from showing correctly.
- What to do
- Back up carefully using mirrors until updated. Check your VIN; the fix is a free software update from the dealer or over the air.
Free at a Ford dealer under the recall. Ask the dealer to check your VIN for open recalls.
Fast or uneven front tire wear
- What you'll notice
- The front tires wear out much faster than expected, often on the edges, and may need replacing well before 40,000 miles.
- Why it happens
- Heavy front ends, worn steering parts and alignment settings that drift out of spec cause the front tires to scrub.
- What to do
- Rotate tires on schedule and get an alignment check, especially after hitting potholes or after any death-wobble repair.
Repair prices for your Ford F-350 Super Duty
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace head gaskets with head studs, plus oil cooler and EGR cooler
- Diagnose and repair major engine damage (up to engine replacement)
- Replace high-pressure pump, injectors, fuel lines and clean the tank
- Replace fuel injectors (set of eight)
- Repair spark plug threads with an insert, new plug and coil
- Replace turbocharger
- Replace radiator
- Extra oil and filter change (diesel)
- Replace fuel tank and fuel filters
- Replace or rebuild automatic transmission
- Replace front locking hub assemblies
- Replace steering damper and worn front-end parts, adjust caster
- Alignment and replace front tires
- Replace DEF tank heater / sending unit
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace camshaft position sensor (recall 07V553)No charge if your vehicle is included
- Install fused jumper harness for the speed control switch (recall 09V399)No charge if your vehicle is included
- Inspect and repair rear driveshaft (recall 22V880)No charge if your vehicle is included
- Inspect driveshaft and reattach underbody insulators (recall 22V087)No charge if your vehicle is included
- Inspect and repair rear axle housing and driveshaft (recall 21V536)No charge if your vehicle is included
- Inspect and repair front hub extenders (recalls 21V390 and 23V758)No charge if your vehicle is included
- Inspect and replace fifth-wheel mounting bracket (recall 21V379)No charge if your vehicle is included
- Inspect and replace left rear axle shaft (recall 23V595)No charge if your vehicle is included
- Inspect and replace rear driveshaft (recall 26V119)No charge if your vehicle is included
- Inspect and replace right rear axle shaft (recall 25V866)No charge if your vehicle is included
- Update transmission control software (recall 14V204)No charge if your vehicle is included
- Inspect and repair steering column shaft (recall 25V626)No charge if your vehicle is included
- Inspect and install steering column bolts (recall 23V344)No charge if your vehicle is included
- Inspect and install brake booster pushrod retainer (recall 25V401)No charge if your vehicle is included
- Update trailer brake module software (recalls 22V193, 25V132, 26V104)No charge if your vehicle is included
- Update PCM and TCM software (recalls 24V957 and 26V158)No charge if your vehicle is included
- Rewire and replace tailgate release switch (recall 19V864)No charge if your vehicle is included
- Add heat-resistant tape and modify B-pillar insulation (recall 19V880)No charge if your vehicle is included
- Replace tailgate camera, harness and module (recall 24V806)No charge if your vehicle is included
- Update camera interface module software (recall 25V315)No charge if your vehicle is included
- Update cluster software or replace cluster (recalls 25V540 and 26V653)No charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.