Your 2003 Ford F-450 / F-550 Super Dutyproblems, repair costs and recalls
What we've documented about the 2003 Ford F-450 / F-550 Super Duty: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2003 Ford F-450 / F-550 Super Duty
8 documented issues apply to 2003, most serious first.
Oil cooler and EGR cooler failure leading to head gasket trouble
- What you'll notice
- White, sweet-smelling exhaust smoke, coolant that keeps going down with no visible leak, coolant pushing out of the overflow bottle, and running hot when loaded.
- Why it happens
- The oil cooler can clog inside and starve the EGR cooler of coolant. The EGR cooler then cracks and leaks coolant into the exhaust, and the extra heat and pressure can lift the head gaskets on this engine.
- What to do
- Stop towing or hauling and have a diesel shop compare oil and coolant temperatures and pressure-test the cooling system. Catching a clogged oil cooler early can save a far larger head gasket job.
Camshaft position sensor can fail and stall the engine (recall)
- What you'll notice
- Rough or choppy idle, hard starting, sudden stalling while driving, or a crank-but-no-start. A warning light may or may not come on.
- Why it happens
- The camshaft sensor tells the computer when to fire the injectors. When it fails, even for a moment, the engine can quit.
- What to do
- Ford recalled this sensor on 7.3L diesel trucks. Check your VIN for open recalls. If the engine stalls, steer to a safe place; the sensor is quick and cheap to replace.
Covered by a Ford recall. If done outside the recall, ask the shop for a written quote.
Spark plug blown out of the cylinder head
- What you'll notice
- A sudden loud popping or ticking from the engine, a rough run with a flashing check engine light, and sometimes an ignition coil sitting loose on top.
- Why it happens
- The early two-valve V10 holds each spark plug with only a few threads in the aluminum head. A plug can loosen over time and strip out of the head.
- What to do
- Stop driving if the engine suddenly starts popping and misfiring. A shop can usually repair the threads with an insert. Make sure plugs are tightened correctly at every tune-up.
Violent front-end shake ('death wobble')
- What you'll notice
- After hitting a bump or rough patch, usually above 45 mph, the steering wheel and front end shake violently and keep shaking until you slow way down.
- Why it happens
- The solid front axle can start to oscillate when the track bar, ball joints, tie rods or steering damper are worn or loose, or alignment is off. Often more than one part contributes.
- What to do
- Slow down gently without slamming the brakes; the shaking stops at low speed. Have a shop inspect the whole front end, not just the steering damper, since a new damper alone can hide the real cause.
Cruise control deactivation switch can overheat and catch fire (recall)
- What you'll notice
- Smoke or a burning smell from under the hood, sometimes with the engine off, or cruise control that stops working.
- Why it happens
- A pressure switch on the brake system that turns off cruise control can leak internally, overheat and start an underhood fire.
- What to do
- Check your VIN for open recalls right away. Park outdoors away from buildings until it is fixed.
Covered by a Ford safety recall at no cost. Check your VIN or ask a Ford dealer.
Turn signals and brake lights may stop working (recall)
- What you'll notice
- Turn signals, hazard lights, tail lights or brake lights don't come on.
- Why it happens
- A small slider inside the steering column multi-function switch can deform, so the lights it controls stop working.
- What to do
- Check your lights and your VIN for open recalls. Have the switch replaced; other drivers can't see you stop or turn without these lights.
Covered by a Ford recall. Outside the recall, ask the shop for a written quote.
Injector control module (FICM) failure
- What you'll notice
- Hard starting or no start, especially in cold weather, rough running, misfires and stalling.
- Why it happens
- The module that powers the injectors can lose voltage as its internal parts wear, often made worse by weak batteries. Without enough voltage the injectors don't fire properly.
- What to do
- Test both batteries first, since weak batteries strain the module. A diesel shop can check the module's output voltage. A rebuilt module with a warranty is a common fix.
Exhaust manifold studs break, causing a ticking exhaust leak
- What you'll notice
- A ticking or puffing sound from the engine area, loudest on a cold start, sometimes with an exhaust smell in the cab or a check engine light.
- Why it happens
- The small studs holding the exhaust manifolds to the V10 heads rust and snap after years of heat and road salt, letting exhaust leak at the joint.
- What to do
- Have a shop confirm which studs are broken. Don't wait too long, since leaking exhaust can burn nearby wiring and a leak near the cab is unsafe. Stronger studs and anti-seize help prevent a repeat.
Repair prices for your 2003 Ford F-450 / F-550 Super Duty
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine oil cooler and EGR cooler
- Reprogram and replace the fuel injection control module (FICM) or its power-supply half
- Install a thread insert in the cylinder head and a new spark plug
- Extract broken exhaust manifold studs, install new studs and gasket
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace camshaft position sensorNo charge if your vehicle is included
- Install fused wiring or replace the deactivation switchNo charge if your vehicle is included
- Replace multi-function switchNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…