Your 2006 Ford Mustangproblems, repair costs and recalls
What we've documented about the 2006 Ford Mustang: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Ford Mustang
5 documented issues apply to 2006, most serious first.
Takata driver airbag inflator (recall)
- What you'll notice
- Usually no warning at all. The danger only shows up if the airbag deploys.
- Why it happens
- These cars used Takata inflators that can degrade over time and rupture during a crash.
- What to do
- Check your VIN for open airbag recalls and get the free repair done as soon as possible.
Recall 15V-319. Free at a Ford dealer. Check your VIN first.
Timing chain guides wear out on the 4.0L V6
- What you'll notice
- A rattle or death-rattle from the back of the engine on startup that may quiet down as it warms up.
- Why it happens
- The plastic chain guides and the tensioners behind the timing cover wear and break up, so the chains slap and can jump.
- What to do
- Have it looked at promptly. A jumped chain on this engine bends valves, and the job gets much bigger once that happens.
Water leaking onto the front floor
- What you'll notice
- Wet carpet in the front footwell, a musty smell, and sometimes electrical glitches.
- Why it happens
- Water can enter through body seals around the cowl or doors. Moisture near the wiring and junction box can cause corrosion.
- What to do
- Have the leak path found and sealed, then dry the carpet fully. Check connectors in the footwell for corrosion.
Plastic thermostat housing cracks and leaks coolant
- What you'll notice
- Sweet-smelling coolant dripping at the front of the engine, a low coolant warning, or the temperature gauge climbing.
- Why it happens
- The housing is plastic and goes brittle with heat cycles until it splits at the seam or around the outlet.
- What to do
- Get it replaced before it lets go completely, and do not keep driving an engine that is losing coolant.
Rear axle pinion seal seeps gear oil
- What you'll notice
- A damp film or drips on the front of the rear axle housing, sometimes a whine from the back of the car.
- Why it happens
- The seal where the driveshaft meets the axle hardens with age and lets gear oil out, and road grit in.
- What to do
- Have the seal replaced and the axle refilled. Running the axle low on oil ruins the gears and bearings.
Repair prices for your 2006 Ford Mustang
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace timing chains, guides and tensioners
- Replace thermostat housing and coolant
- Replace rear axle pinion seal and refill gear oil
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace driver airbag inflator (recall remedy)No charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…