Home › Ford › Probe › 1997
My vehicle

Your 1997 Ford Probeproblems, repair costs and recalls

What we've documented about the 1997 Ford Probe: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 1997174 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeAbout every 3,000-5,000 miles · Low oil pressure can make these engines tick; check the level between changes.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000-50,000 miles
Price not verified
Ask for an estimate
Rear brake pads/rotors or shoes/drumsAbout every 40,000-70,000 miles
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3-5 years
Price not verified
Ask for an estimate
Spark plugs (4 on the 2.0L, 6 on the V6)About every 60,000 miles (follow the owner's manual) · Replace plug wires if they are oil-soaked.
Price not verified
Ask for an estimate
Engine coolant drain and refillAbout every 3-5 years (follow the owner's manual)
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1997 Ford Probe

17 documented issues apply to 1997, most serious first.

Stop soon1996–1997Transmission

Automatic transmission harsh shifts or failure

What you'll notice
The O/D (overdrive) light flashes, shifts are harsh or late, the car drops into a lower gear on its own, or it loses power and slips. Some owners report repeated failures and rebuilds.
Why it happens
Automatic Probes use Ford's CD4E transaxle, which has a reputation for internal wear. Ford issued several bulletins for harsh shifts and engagement tied to trouble codes 628 and P0741 (torque converter clutch slipping). A flashing O/D light means the transmission computer has stored a fault.
What to do
Have the transmission codes read and check the fluid level and condition. If it is slipping, avoid hard driving. On a car this age a used or rebuilt transmission is usually the most sensible fix.
Repair costInsufficient verified pricing for this vehicle and repair
Replace automatic transaxle with used or rebuilt unit. Prepare an itemized shop request.
Walk through this symptom: Harsh or late shifting →
Stop soon1996–1997Engine

Engine stalls or shuts off while driving

What you'll notice
The engine dies without warning while driving, sometimes with the check engine light or all dash lights coming on. Power steering and brake assist get much harder until it restarts.
Why it happens
Owners have filed many stalling complaints with NHTSA, including some that led to crashes. Ford released an engine computer reprogramming for stalling, and failed crankshaft and camshaft position sensors are another known cause.
What to do
Treat stalling as a safety problem. Have the codes read and ask whether the stalling reflash was ever done. Crank and cam sensors are inexpensive to test.
Repair costInsufficient verified pricing for this vehicle and repair
Stall diagnosis, engine computer reflash or crank/cam sensor replacement. Prepare an itemized shop request.
Walk through this symptom: Engine stalls while driving →
Stop soon1997Engine

Timing belt tensioner spring can break (recall)

What you'll notice
Often no warning. The engine can suddenly stall while driving, leaving you without power steering.
Why it happens
On some 1997 Probes a spring in the timing belt tensioner could break and get caught in the belt. Ford recalled about 5,700 cars in 1998 (NHTSA 98V206, Ford 98S30) to inspect and fix the tensioner.
What to do
Check your VIN for open recalls with Ford. If you are unsure whether it was done, have the timing belt and tensioner inspected.
Typical repair costNo charge if your vehicle is in the recall
Inspect and repair timing belt tensioner under recall
Stop soon1996–1997Steering

Power steering belt snaps or steering rack fails

What you'll notice
Steering suddenly gets very heavy, a squeal or buzz from the pump, fluid leaks, or a clicking noise when turning.
Why it happens
Owners report power steering belts breaking at highway speed, leaking or failed rack-and-pinion units, and noisy pumps.
What to do
Check the belt and power steering fluid regularly. If you find a leak or the steering gets heavy, have the belt, pump, hoses and rack inspected.
Repair costInsufficient verified pricing for this vehicle and repair
Replace power steering belt, hose or rack-and-pinion. Prepare an itemized shop request.
Get checked1996–1997Engine

Intermittent no-start, cranks but won't fire

What you'll notice
The engine cranks normally but will not start, then starts fine another time. It may also cut out and stall once running.
Why it happens
Owners and technicians point to the ignition system: the distributor (with its built-in pickup and ignition parts), engine grounds and position sensors. These faults are often heat-related and come and go.
What to do
Have a shop check for spark and fuel pressure while the problem is happening. The distributor is a common fix; also have the main engine ground wires cleaned.
Repair costInsufficient verified pricing for this vehicle and repair
Replace distributor assembly. Prepare an itemized shop request.
Walk through this symptom: Car won't start →
Get checked1996–1997Fuel

Hard to start when cold or after sitting

What you'll notice
Long cranking before the engine catches, especially on a cold morning or after the car has sat for a while. Once running it is usually fine.
Why it happens
This is the most-reported 1997 Probe problem. Ford issued a bulletin for hard starting caused by fuel pressure bleeding off while the car sits (fuel pressure leak-down), which leaves the injectors without enough pressure at the next start.
What to do
Have a shop do a fuel pressure and leak-down test. A leaking injector, fuel pressure regulator or pump check valve is the usual culprit.
Repair costInsufficient verified pricing for this vehicle and repair
Fuel pressure leak-down test and repair (injector, regulator or pump check valve). Prepare an itemized shop request.
Walk through this symptom: Hard to start when cold →
Get checked1996–1997Engine

Timing belt wears out and snaps

What you'll notice
The engine suddenly quits while driving and cranks over fast but will not start again.
Why it happens
Both Probe engines use a rubber timing belt that must be replaced on schedule. Many neglected Probes simply broke their belts. Owners say these engines are non-interference, so a snapped belt usually does not bend valves.
What to do
If you do not know when the belt was last changed, replace the belt and tensioner now. If it has already snapped, have the belt replaced and the engine checked before assuming the worst.
Repair costInsufficient verified pricing for this vehicle and repair
Replace timing belt and tensioner. Prepare an itemized shop request.
Get checked1996–1997Engine

Rough running and hesitation from a failing sensor

What you'll notice
The engine runs rough, hesitates or skips when you accelerate or shift, idles poorly or loses power.
Why it happens
This is the most commonly reported Probe engine complaint on RepairPal. Failing throttle position sensors, mass air flow sensors and crank or cam position sensors are frequent causes. Ford issued a service tip to replace the mass air flow sensor as a full assembly.
What to do
Have the codes read and the sensor readings checked with a scan tool before replacing parts. Also check plugs and plug wires.
Repair costInsufficient verified pricing for this vehicle and repair
Replace throttle position or mass air flow sensor. Prepare an itemized shop request.
Walk through this symptom: Hesitation when accelerating →
Get checked1996–1997Safety

Airbag light flashing

What you'll notice
The airbag warning light flashes or stays on.
Why it happens
Ford issued a bulletin noting that a poor connection at the clock spring (the coiled wiring behind the steering wheel that feeds the driver airbag) can cause this.
What to do
Have the airbag codes read. While the light is on the airbags may not work, so do not put this off.
Repair costInsufficient verified pricing for this vehicle and repair
Replace airbag clock spring. Prepare an itemized shop request.
Walk through this symptom: Airbag (SRS) light on →
Get checked1996–1997Drivetrain

Clutch pedal sticks partway to the floor

What you'll notice
On manual cars the clutch pedal stays down or sticks halfway, making it hard or impossible to shift.
Why it happens
This is a reported Probe problem around 100,000 miles. A leaking clutch master or slave cylinder lets hydraulic pressure drop so the pedal does not return.
What to do
Check the clutch fluid reservoir for low or dirty fluid and look for leaks. Replacing the clutch master and/or slave cylinder and bleeding the system usually fixes it.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch master cylinder and bleed system. Prepare an itemized shop request.
Get checked1996–1997Engine

Oil leaking into the spark plug wells

What you'll notice
Oil smell, oil on the spark plugs or plug wires, and misfires or rough running.
Why it happens
Owners report engine oil seeping into the spark plug wells, which usually comes from a hardened valve cover gasket or plug tube seals.
What to do
Replace the valve cover gasket and seals and clean the plug wells. Replace any oil-soaked plug wires.
Repair costInsufficient verified pricing for this vehicle and repair
Replace valve cover gasket and spark plug tube seals. Prepare an itemized shop request.
Walk through this symptom: Engine oil leak →
Get checked1996–1997Engine

Ticking engine noise and low oil pressure

What you'll notice
A ticking or tapping noise from the engine, rough running, stalling or reduced power, sometimes with the oil light.
Why it happens
RepairPal lists a defective oil pump as a cause of these symptoms on the Probe. Low oil pressure starves the hydraulic valve lifters, which then tick.
What to do
Check the oil level first and stop driving if the oil light is on. Have the oil pressure tested before replacing parts.
Repair costInsufficient verified pricing for this vehicle and repair
Oil pressure test and oil pump replacement. Prepare an itemized shop request.
Walk through this symptom: Oil pressure light on →
Monitor1997Engine2.5L V6

Check engine light with code P1794 (V6)

What you'll notice
The check engine light comes on and code P1794 is stored, usually with no change in how the car drives.
Why it happens
Ford issued bulletin 96245 for 1997 Probes with the 2.5L V6 that turn on the check engine light and store code P1794. The code relates to the power supply signal the engine computer sees, so it is often electrical rather than mechanical.
What to do
Have the code read and the battery, terminals and engine computer power connections checked, and ask a shop to look up Ford bulletin 96245 if the light keeps coming back.
Repair costInsufficient verified pricing for this vehicle and repair
Diagnose code P1794 and repair power supply connection. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Monitor1996–1997Safety

Seat belt slow to retract

What you'll notice
A front seat belt rolls back slowly or hangs loose instead of retracting fully.
Why it happens
Ford found the belt webbing can get twisted behind the B-pillar trim, which slows retraction. Owners also report worn retractors.
What to do
Have the trim removed and the webbing straightened. If the belt still does not retract or lock, replace the retractor.
Repair costInsufficient verified pricing for this vehicle and repair
Straighten belt webbing or replace seat belt retractor. Prepare an itemized shop request.
Monitor1997Fuel

Won't start with the fuel cutoff light on

What you'll notice
The engine will not start or dies, and a fuel cutoff warning stays on.
Why it happens
The Probe has a fuel cutoff (inertia) switch that shuts off the fuel pump after a jolt such as a pothole or minor impact. If it trips or the switch fails, the pump gets no power.
What to do
Check the owner's manual for the reset button location and press it. If the light keeps coming on, have the switch and its wiring checked.
Repair costInsufficient verified pricing for this vehicle and repair
Reset or replace fuel cutoff (inertia) switch. Prepare an itemized shop request.
Walk through this symptom: Car won't start →
Monitor1996–1997Transmission

Shifter stuck in Park from a bad brake light switch

What you'll notice
On automatic cars the shifter will not move out of Park even with the brake pressed, and the brake lights may not work.
Why it happens
The shift lock only releases when the brake light switch tells it you are braking. Ford bulletins note a faulty brake lamp switch can disable the shift interlock.
What to do
Check whether the brake lights work. Use the shift lock override if needed, and have the brake light switch replaced.
Repair costInsufficient verified pricing for this vehicle and repair
Replace brake light switch. Prepare an itemized shop request.
Walk through this symptom: Can't shift out of Park →
Monitor1996–1997Electrical

Power antenna stops working

What you'll notice
The power antenna will not go up or down, or the radio has poor reception.
Why it happens
Owners note the power antenna on these cars rarely works anymore. The mast and motor gears wear and jam.
What to do
Replace the antenna mast or the whole motor assembly, or fit a fixed antenna.
Repair costInsufficient verified pricing for this vehicle and repair
Replace power antenna mast or motor. Prepare an itemized shop request.
Price guide

Repair prices for your 1997 Ford Probe

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace automatic transaxle with used or rebuilt unit
  • Stall diagnosis, engine computer reflash or crank/cam sensor replacement
  • Replace distributor assembly
  • Fuel pressure leak-down test and repair (injector, regulator or pump check valve)
  • Replace timing belt and tensioner
  • Diagnose code P1794 and repair power supply connection
  • Replace throttle position or mass air flow sensor
  • Replace power steering belt, hose or rack-and-pinion
  • Replace airbag clock spring
  • Straighten belt webbing or replace seat belt retractor
  • Replace clutch master cylinder and bleed system
  • Replace valve cover gasket and spark plug tube seals
  • Reset or replace fuel cutoff (inertia) switch
  • Oil pressure test and oil pump replacement
  • Replace brake light switch
  • Replace power antenna mast or motor

Recall repairs: usually free at the dealer

A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.

  • Inspect and repair timing belt tensioner under recallNo charge if your vehicle is included
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1997 Ford Probe
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1997 Ford Probe as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.