Your 2019 Genesis G80problems, repair costs and recalls
What we've documented about the 2019 Genesis G80: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2019 Genesis G80
8 documented issues apply to 2019, most serious first.
ABS module can short and catch fire (recall)
- What you'll notice
- Usually no warning. Some owners may see the ABS warning light or smell burning from under the hood, even when the car is parked and off.
- Why it happens
- The anti-lock brake control module can short out inside. Because it stays powered, it can start an engine-bay fire while parked or driving.
- What to do
- Check your VIN for recall 21V-160. Until the free fuse fix is done, park outdoors and away from buildings. If you smell burning or see smoke, move away from the car and call for help.
Free under recall. Check your VIN.
Starter solenoid can short and catch fire (recall)
- What you'll notice
- The car may crank slowly, fail to start, or you may smell burning from the engine bay. Often there is no warning before a short.
- Why it happens
- Water can get into the starter solenoid and cause an electrical short, which can lead to an engine-bay fire.
- What to do
- Check your VIN for recall 24V-107. The dealer installs a free relay kit in the engine fuse box. Park outdoors and away from buildings until it's done.
Free under recall. Check your VIN.
Turbo oil feed pipe can leak and start a fire (recall)
- What you'll notice
- Oil spots under the front of the car, a burning oil smell, or smoke from under the hood.
- Why it happens
- The oil supply pipe to the left turbocharger can wear out or have a loose seal, letting oil drip onto the hot exhaust manifold.
- What to do
- Check your VIN for recalls 19V-538 and 24V-191. The dealer replaces the left turbo oil feed pipe for free. If you smell burning oil, pull over and shut the engine off.
Free under recall. Check your VIN.
Transmission slipping or incorrect gear ratio code
- What you'll notice
- The engine revs up without the car speeding up, poor or slow shifts, and a check engine light with a gear ratio code.
- Why it happens
- A clutch inside the transmission is slipping, or the transmission computer hasn't learned the shift pressures correctly.
- What to do
- Have it diagnosed soon. Genesis bulletins 19-AT-012G and 19-AT-007G walk dealers through testing the clutches and loading oil pressure data into the transmission computer.
Check engine light from a fuel pump module communication error
- What you'll notice
- The check engine light comes on with code U0109. In some cases the engine may run poorly or stall.
- Why it happens
- The engine computer loses communication with the fuel pump control module, often from a wiring, connector or module fault.
- What to do
- Have the code read and the wiring and module checked. Dealers follow bulletin 21-FL-003G for the diagnosis.
A/C blows warm or cuts out on hot days
- What you'll notice
- The A/C cools poorly, blows hot from some vents, or stops cooling during hot weather and then comes back.
- Why it happens
- Owners report A/C failures that dealers sometimes can't reproduce. Causes can include the compressor, a refrigerant leak or a climate control part.
- What to do
- Note when it happens and the outside temperature, then have the A/C pressures and climate controls checked while the problem is happening.
Driveline vibration on AWD 3.8 models
- What you'll notice
- A vibration through the floor or seat at certain speeds.
- Why it happens
- The angles of the driveshaft on AWD 3.8-liter models can be off, causing vibration.
- What to do
- Ask a dealer about bulletin 20-DS-002G, which measures and adjusts the driveshaft angles.
Seat back panel loose or seat creaks when turning
- What you'll notice
- The panel on the back of a front seat comes loose, or the seat creaks and wobbles when you turn.
- Why it happens
- A retaining clip on the seat backboard can fail, and the seat tilt mechanism can have play.
- What to do
- Ask a dealer about bulletins 19-BD-004G and 20-BD-009G, which replace the clip and add a retaining ring.
Repair prices for your 2019 Genesis G80
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Diagnose transmission; load pressure data or replace transmission
- Diagnose and repair fuel pump control module wiring or module
- A/C diagnosis; compressor replacement if failed
- Replace seat backboard clip; add tilt pipe retaining ring
- Measure and adjust driveshaft angles
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free recall repair at the dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…