Hyundai Azeraproblems, repair costs and recalls
Problems reported across 2006–2017. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
23 documented issues across all years, most serious first.
ABS module can short and catch fire (recall)
- What you'll notice
- Often no warning. Some owners see the ABS light come on, smell burning, or notice smoke from the engine bay, even with the car parked and off.
- Why it happens
- On 2006-2011 cars, water can get into the anti-lock brake module and short it. On 2012-2015 cars, brake fluid can leak inside the module and cause a short. Either can start an engine compartment fire. Hyundai recalled both generations.
- What to do
- Park outside and away from buildings until the fix is done. Check your VIN for recall 18V-026 (2006-2011) or 23V-651 (2012-2015).
Free at a Hyundai dealer.
Rear crossmember rusts and control arm can come loose (recall)
- What you'll notice
- Clunking from the rear over bumps, the car pulling or wandering, uneven tire wear, or heavy rust on the rear subframe.
- Why it happens
- Road salt can corrode the rear crossmember until a rear lower control arm mount lets go, which suddenly changes the wheel alignment. Hyundai recalled cars in salt-belt states.
- What to do
- Have the rear crossmember inspected, especially if you live where roads are salted. Check your VIN for recall 13V-354.
Free under recall in the covered states.
Front passenger airbag may not deploy (recall)
- What you'll notice
- The airbag warning light may come on, or there may be no sign at all.
- Why it happens
- Repeated use of the front passenger seat belt can damage the wiring to its tension sensor, which can stop the passenger front airbag from deploying in a crash.
- What to do
- Check your VIN for recall 09V-497. Have the airbag light checked promptly if it is on.
Free under recall.
Brake lights may not work (recall)
- What you'll notice
- Brake lights stay off or stay on, cruise control will not cancel when braking, the stability control light comes on, or the shifter can leave Park without the brake pressed.
- Why it happens
- The brake light switch can fail. Hyundai recalled it in several campaigns covering these years.
- What to do
- Have someone check your brake lights. Check your VIN for recalls 09V-280, 09V-122 and 13V-113.
Free under recall. Out of recall it is a relatively small paid job.
Driver's power seat moves by itself (recall)
- What you'll notice
- The driver's seat or seat back moves forward or back on its own while driving.
- Why it happens
- A faulty power seat switch on cars built March-August 2007 can move the seat without input, which can affect your control of the car.
- What to do
- If the seat moves on its own, stop safely. Check your VIN for recall 16V-630; the dealer replaces the switch for free.
Free under recall.
Throttle sensor fault causes stalling or limp mode
- What you'll notice
- Check engine light, sluggish or no acceleration, the car stuck at low speed, rough running or stalling.
- Why it happens
- The throttle position sensor in the electronic throttle body fails on these cars. Fixes usually include a new sensor or throttle body and an engine computer update.
- What to do
- Have the codes read right away. Ask the dealer to check for the engine computer update with the sensor repair.
Steering feels stuck or notchy at highway speed
- What you'll notice
- At highway speed the steering seems to stick in place and needs a firm push before it responds, or reacts late to small corrections.
- Why it happens
- Several owners reported this to NHTSA. No cause has been confirmed, and dealers often could not reproduce it; it points to the electric power steering system.
- What to do
- If it happens, keep a firm grip and slow down. Write down when it happens and ask the dealer to scan the steering module and road test at highway speed.
Passenger airbag may deploy with wrong force (recall)
- What you'll notice
- The passenger airbag status light may show the wrong state for who is sitting in the seat.
- Why it happens
- The occupant detection system in the passenger seat could misjudge an adult, child or child seat on cars built May-November 2012.
- What to do
- Check your VIN for recall 13V-264; the dealer recalibrates the system.
Free under recall.
Valve cover gasket oil leak onto alternator
- What you'll notice
- Burning oil smell, oil on top of the engine or dripping on the alternator, and later a battery light, dim lights or a dead charging system.
- Why it happens
- The valve cover gaskets and spark plug tube seals harden and leak. Oil from the front cover can soak the alternator below it and make it fail. Repeat leaks are common.
- What to do
- Have leaks fixed early, before oil ruins the alternator. Replace both gaskets and the plug tube seals together.
Cold-start ticking or rattle from the engine
- What you'll notice
- A ticking, rattling or knocking sound for a few seconds after a cold start, sometimes longer.
- Why it happens
- Timing chain tensioners can let the chain slap on start-up, and Hyundai issued a bulletin to replace them. Some cases were traced to piston slap, and a few owners got a new engine block under warranty.
- What to do
- Have a dealer listen on a true cold start and check for the tensioner bulletin. Keep oil changes on time with the correct grade.
Timing cover oil leak
- What you'll notice
- Oil seeping from the front of the engine behind the drive belts, sometimes dripping onto the alternator.
- Why it happens
- The front timing chain cover gasket and sealant can leak with age. The repair is labor heavy because the front of the engine must come apart.
- What to do
- Watch the oil level. A small seep can be monitored, but fix it if oil is reaching the belts or alternator.
Crankshaft pulley (harmonic balancer) failure
- What you'll notice
- Squealing on start-up, a wobbling pulley at the front of the engine, or the belt slipping off.
- Why it happens
- The rubber layer in the crankshaft pulley breaks down so the outer ring loosens.
- What to do
- Have it replaced soon. A loose pulley can throw the belt, which stops the alternator and water pump.
Rattle or clatter on start-up
- What you'll notice
- A loud clatter for a second or two after a cold start, especially after the car sat overnight.
- Why it happens
- The timing chain tensioner or cam phaser oil control valve lets the chain or phasers rattle until oil pressure builds. Hyundai later issued a bulletin changing the timing chain and crankshaft sprockets on these engines. A few owners found metal in the oil and needed a new engine.
- What to do
- Have a dealer check it on a cold start and look for the timing chain bulletin. Keep up with oil changes, and get a second opinion if told it is normal and it keeps getting worse.
Harsh, delayed or slipping shifts
- What you'll notice
- Jerky shifts, a pause before the car engages Drive or Reverse, engine speed flaring between gears, or a check engine light for an incorrect gear ratio.
- Why it happens
- Hyundai issued several bulletins for this 6-speed automatic covering harsh or delayed shifts, clutch wear relearning and clutch slipping.
- What to do
- Ask a dealer to check the transmission software, fluid level and type before replacing fluid or parts. Slipping needs prompt diagnosis.
Shifter will not come out of Park
- What you'll notice
- With the engine running and the brake pressed, the shifter sometimes will not move out of Park.
- Why it happens
- Hyundai issued bulletins for this 6-speed shifter on certain cars.
- What to do
- Most shifters have a manual release slot to move it out of Park. Have a dealer check the bulletin and the brake light switch.
Trunk cannot be opened from inside (recall)
- What you'll notice
- The trunk is hard to open or close, or the inside emergency release does not open it.
- Why it happens
- Damage to the trunk latch can stop the inside release from working, so the car does not meet the federal trunk release standard.
- What to do
- Check your VIN for recall 21V-619; the dealer replaces the latch base for free.
Free under recall.
Cooling fan runs constantly or does not run
- What you'll notice
- The radiator fan keeps running after the car is off, roars all the time, or does not come on so the engine runs hot in traffic.
- Why it happens
- The cooling fan relay or fan control module fails.
- What to do
- Watch the temperature gauge. If the fan does not run and the engine heats up in traffic, pull over and have the fan relay and module tested.
Squealing or whining from drive belt idler pulley
- What you'll notice
- A whistle, squeal or whine from the front of the engine, often worse on cold mornings.
- Why it happens
- Bearings in the idler pulley and belt tensioner wear out and get noisy.
- What to do
- Have the pulleys spun by hand to find the bad one. Replace the belt at the same time if it is cracked.
Dashboard cracks
- What you'll notice
- Cracks open in the top of the dashboard, sometimes near the passenger airbag.
- Why it happens
- The dashboard surface breaks down from heat and sun.
- What to do
- Use a sunshade. A cracked dash near the airbag should be checked, and a full dash replacement is labor heavy.
Clunking from front sway bar links
- What you'll notice
- A knock or clunk from the front over bumps and rough roads.
- Why it happens
- The front stabilizer bar links or bushings wear out.
- What to do
- Have the front end checked. Sway bar links are inexpensive and usually replaced in pairs.
Clicking or clunk when turning the steering wheel
- What you'll notice
- A click, clack or thud from the steering column when turning the wheel, often over bumps.
- Why it happens
- The rubber coupling between the electric power steering motor and the steering column wears out. Hyundai released a more durable coupling.
- What to do
- It does not affect steering control, but have the coupling replaced with the updated part.
Fogging or water inside headlights and tail lights
- What you'll notice
- Condensation or droplets inside the headlights, tail lights, daytime running lights or fog lights.
- Why it happens
- Moisture builds up inside the lamp housings. Hyundai issued bulletins on how to judge and repair it.
- What to do
- Light fog that clears is normal. Pooled water or failing bulbs means the lamp should be repaired or replaced.
Check engine light from oxygen or cam sensors
- What you'll notice
- Check engine light, sometimes with rough running, hesitation or poorer fuel economy.
- Why it happens
- Oxygen sensors and camshaft position sensors are frequent failures on these cars, according to owner repair records.
- What to do
- Have the codes read. Replace the sensor the code points to and clear the codes; a loose gas cap can also set a light.
Repair prices for your Hyundai Azera
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace valve cover gaskets and spark plug tube seals
- Replace timing chain tensioners and gaskets
- Replace throttle position sensor or throttle body and update engine computer
- Reseal timing chain cover
- Replace idler pulley and drive belt
- Replace crankshaft pulley and drive belt
- Replace dashboard pad
- Replace front stabilizer bar links (pair)
- Replace timing chain tensioner or cam oil control valve
- Replace steering motor flexible coupling
- Transmission software update, relearn and fluid level check
- Replace oxygen or camshaft position sensor
- Replace cooling fan relay or fan control module
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Install ABS protection relay or replacement fuseNo charge if your vehicle is included
- Repair or replace rear crossmemberNo charge if your vehicle is included
- Inspect seat belt, reroute and secure sensor wiringNo charge if your vehicle is included
- Replace brake light switchNo charge if your vehicle is included
- Replace power seat switchNo charge if your vehicle is included
- Recalibrate passenger occupant detection systemNo charge if your vehicle is included
- Replace trunk latch baseNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.