Your 2020 Infiniti QX60problems, repair costs and recalls
What we've documented about the 2020 Infiniti QX60: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2020 Infiniti QX60
7 documented issues apply to 2020, most serious first.
CVT shudder, hesitation and failure
- What you'll notice
- A shudder or judder when accelerating gently, often around 15-25 mph, hesitation or weak acceleration, whining, or the vehicle barely moving. It usually gets worse over time.
- Why it happens
- The continuously variable transmission (CVT) in the 2013-2020 models can wear inside, letting the belt slip. Infiniti issued a service bulletin for CVT judder on the 2013 JX35 and 2014-2018 QX60, and many high-mileage owners report needing a replacement transmission.
- What to do
- Have the transmission scanned for judder codes (such as P17F0) and ask an Infiniti dealer about the bulletin and any extended CVT coverage for your VIN. Change the CVT fluid on schedule with Nissan's specified fluid.
Steering knuckle may be too weak (recall)
- What you'll notice
- The steering wheel is off center or the vehicle pulls after hitting a curb or pothole.
- Why it happens
- Some steering knuckles or rear axle housings were not heat-treated properly and may not be strong enough. Nissan recalled affected vehicles.
- What to do
- Check your VIN for open recalls and have the parts inspected, especially after any hard impact.
Free at any Infiniti dealer. Check the VIN first.
Wheel bearing hum or growl
- What you'll notice
- A humming or growling noise that rises with speed and may change when you turn.
- Why it happens
- Wheel bearings and hubs wear out and are among the more-reported QX60 repairs in owner surveys.
- What to do
- Have the bearings checked for play and noise. A badly worn bearing can affect steering and braking.
Engine cooling fan stops working
- What you'll notice
- The temperature gauge climbs in traffic or with the A/C on, or the A/C blows warmer when stopped.
- Why it happens
- The electric radiator fan motor or its control can fail.
- What to do
- Watch the temperature gauge and pull over if it runs hot. Have the fan and its fuse, relay and wiring tested.
Erratic or high idle from a dirty throttle body
- What you'll notice
- The idle speed bounces, sits too high, or the engine nearly stalls when you come to a stop.
- Why it happens
- Carbon builds up in the electronic throttle body. After it is cleaned, the throttle needs an idle relearn or the idle can stay erratic.
- What to do
- Have the throttle body cleaned and the idle relearn procedure done with a scan tool.
Rattles or squeaks from the dashboard
- What you'll notice
- Buzzing, rattling or squeaking from the dashboard area, especially over rough roads or in cold weather.
- Why it happens
- Dash trim and panels loosen or rub against each other with age. Owners report it as one of the more common annoyances.
- What to do
- Note exactly where and when it happens so a shop can find it. Felt tape or clip repairs usually fix it.
Sun visor breaks or won't stay up
- What you'll notice
- The sun visor droops, will not stay in place, or breaks at its mount.
- Why it happens
- The visor's hinge and mount wear out or crack.
- What to do
- Replace the visor assembly; it is a simple repair.
Repair prices for your 2020 Infiniti QX60
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace CVT transmission
- Clean throttle body and perform idle relearn
- Replace front wheel hub and bearing (one side)
- Replace radiator cooling fan assembly
- Locate and secure loose dash trim
- Replace sun visor
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Inspect and replace steering knuckle or rear axle housingNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…