Isuzu Rodeoproblems, repair costs and recalls
Problems reported across 1996–2004. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
21 documented issues across all years, most serious first.
Frame rusts through
- What you'll notice
- Clunks or rattles from underneath, rust flakes falling off, holes in the frame or wheel wells, the vehicle swerving, or a failed state safety inspection.
- Why it happens
- The Rodeo's frame and rear underbody have little rust protection, and in salt-belt states they can rot through even when the body looks fine. Owners report shock mounts and spring mounts breaking off, and in one case a loose shock damaged a brake line.
- What to do
- Have the frame inspected every year, especially behind the rear wheels. If a frame rail, mount or bracket is rusted through, park the vehicle until it is repaired, because parts can break loose while driving.
Rear suspension link brackets rust off the frame (recall)
- What you'll notice
- Clicking or banging from the rear when braking or going over bumps, the Rodeo pulling or swerving, or the rear axle sitting crooked.
- Why it happens
- Rust can eat away the brackets that hold the rear suspension lower links to the frame until one detaches, which hurts handling. Isuzu recalled about 150,000 vehicles in 2010.
- What to do
- Ask about recall 10V436000. If you hear new clunks from the rear, have the brackets inspected right away and don't drive it if one is loose.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Rear suspension bracket corrosion (recall)
- What you'll notice
- Swaying, clunks from the rear, or a rear lower link mount that has visibly separated from the frame.
- Why it happens
- Excessive rust near the front mounting bracket of the rear suspension lower link can let it break away from the frame. Covered vehicles are those sold or registered in 22 cold-weather states and D.C.
- What to do
- Ask about recall 13V547000. Isuzu treats light rust, adds a reinforcement bracket to damaged ones, and offered to buy back vehicles that are too rusted to fix.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
V6 burns oil and can fail
- What you'll notice
- You add oil often (some owners report a quart a week), there may be blue smoke, and in bad cases the engine knocks, throws a rod or seizes.
- Why it happens
- The 3.2L V6 in these years is prone to heavy oil consumption. If the oil level is allowed to drop, the bearings starve and the engine fails. One owner reported Isuzu issued a service bulletin for the oil burning.
- What to do
- Check the oil every fill-up and keep it full. If oil use keeps rising or the engine starts knocking, get a professional diagnosis before it fails completely.
Engine knocking and loss of compression at high mileage
- What you'll notice
- A knocking noise from the engine, rough running, and low power, usually well past 100,000 miles.
- Why it happens
- Worn internal engine parts lead to knocking and low compression. Owners of 1996 and 1997 Rodeos report it near the end of the engine's life.
- What to do
- Have a compression test done. If the engine is badly worn, a used engine is usually cheaper than a rebuild.
Automatic transmission slips or shifts roughly
- What you'll notice
- Slipping, jerky or rough shifts, a flashing warning light, refusal to go past 20 mph, or the vehicle stalling.
- Why it happens
- Internal transmission wear is the most common cause. Some owners were told the inhibitor (range) switch was sending the wrong signal.
- What to do
- Check the fluid and have the codes read. A bad range switch is a cheap fix; slipping usually means a rebuild or replacement.
Timing belt problem can stall the engine (recall)
- What you'll notice
- The engine cranks but won't start, or stalls while driving and won't restart.
- Why it happens
- Isuzu ran a campaign (01I002000) on the timing belt in these vehicles because a problem could leave the engine unable to run.
- What to do
- Ask whether your VIN was covered by campaign 01I002000. Whatever the answer, replace the timing belt at the interval in your owner's manual.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
ABS can lengthen stopping distance (recall)
- What you'll notice
- The ABS light may come on, and stops take longer than they should.
- Why it happens
- Isuzu recalled over 160,000 vehicles because of an ABS problem that could extend stopping distance.
- What to do
- Ask about recall 02I002000. Have the ABS warning light checked if it comes on.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Rear lower link bolt can come loose (recall)
- What you'll notice
- Clunking from the rear axle and poor handling.
- Why it happens
- A bolt could detach and separate the lower link from the rear axle.
- What to do
- Ask about recall 00V058000 and have the rear links checked if you hear clunking.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Engine harness fault can cut fuel (recall)
- What you'll notice
- The engine won't start, or stalls while driving.
- Why it happens
- A cracked terminal in the engine wiring harness can send a false high-speed signal to the engine computer, which then cuts fuel.
- What to do
- Ask about recall 98V170000.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Fuel return hose can crack and leak (recall)
- What you'll notice
- A gas smell under the hood or fuel dripping in the engine bay.
- Why it happens
- Some fuel return hoses were made with the wrong outer rubber and can crack from ozone exposure.
- What to do
- Don't drive with a fuel smell. Ask about recall 00V298000.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Fuel pump can leak (recall)
- What you'll notice
- A fuel smell near the rear of the vehicle or fuel dripping from the tank area.
- Why it happens
- A fault in the fuel pump can let fuel leak, which could cause a fire.
- What to do
- Ask about recall 05V466000 and get any fuel smell checked right away.
Free at an Isuzu-authorized shop if it was never done. Isuzu no longer sells vehicles in the US, so call ahead to confirm who handles recalls.
Reduced power and stalling at highway speed
- What you'll notice
- The check engine and reduced power lights come on, the engine stops responding to the gas pedal, and it may stall.
- Why it happens
- Owners report this at high mileage; one mechanic blamed a failing fuel pump. Low oil and worn engines also add to it.
- What to do
- Pull over safely if it happens. Have codes read and the fuel pressure tested.
Coolant leak on top of the engine
- What you'll notice
- Coolant drips or a sweet smell from the top of the engine, a dropping coolant level, and possible overheating.
- Why it happens
- Owners report coolant leaking from the top of the engine on the 1997 at high mileage. The exact source varies, so it has to be traced.
- What to do
- Find the leak with a pressure test before the engine overheats. Keep the coolant topped up until it is fixed.
Stalls at stops and is hard to start
- What you'll notice
- The engine stalls at red lights or when pulling away, and can be hard to restart.
- Why it happens
- Owners report stalling that dealers often couldn't reproduce. The cause is often hard to find.
- What to do
- Note when it happens and have codes read right after a stall. A shop can then check sensors, idle control and wiring.
Throttle position sensor fails
- What you'll notice
- Erratic idle, hesitation, poor shifting or a check engine light.
- Why it happens
- The throttle position sensor tells the engine and transmission how far the gas pedal is pressed. When it wears out, both run poorly. Owners report it around 75,000 miles.
- What to do
- Have codes read. Replacing the sensor is usually a quick, inexpensive repair.
Oil use and leaks on later models
- What you'll notice
- The oil level drops between changes with no obvious leak, or oil drips under the vehicle.
- Why it happens
- Owners of 2004 models report the engine using oil or leaking from a hard-to-find source.
- What to do
- Check the oil often and keep it full. Have the engine checked for leaks from the valve covers and seals.
Check engine and ABS lights come on
- What you'll notice
- The check engine and ABS lights come on, often together.
- Why it happens
- Owners of 2004 models report both lights coming on. The stored codes show which sensor or circuit is at fault.
- What to do
- Have both systems scanned. The ABS may not work while its light is on, so brake gently on slippery roads.
Starter fails and engine won't turn over
- What you'll notice
- You turn the key and hear a click or nothing at all, and the engine doesn't crank.
- Why it happens
- Starter motors on the 1996 wear out at high mileage. A weak battery or bad cables can cause the same thing.
- What to do
- Have the battery and cables tested first, then the starter.
Knocking when the engine is cold
- What you'll notice
- A knocking or ticking sound for the first minutes after a cold start that fades as the engine warms.
- Why it happens
- Owners report cold-start knock on 2004 models at fairly low mileage. The cause varies and needs a mechanic to listen to it.
- What to do
- Use the oil grade in the owner's manual and keep it full. Have it checked if the noise lasts after warm-up.
Blower speed control connector melts
- What you'll notice
- The fan stops working on some or all speeds, and there may be a hot plastic smell.
- Why it happens
- The connector at the fan speed control can overheat and melt.
- What to do
- Have the connector and blower resistor replaced. Stop using the fan if you smell melting plastic.
Repair prices for your Isuzu Rodeo
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Repair or reinforce rusted frame sections
- Replace engine with used or remanufactured unit
- Replace engine with used unit
- Replace leaking intake-area gaskets or hoses
- Replace starter
- Repair or replace automatic transmission
- Diagnose stalling and replace faulty sensor
- Replace throttle position sensor
- Diagnose and replace fuel pump
- Find and repair engine oil leak
- Diagnose and replace faulty sensor
- Diagnose engine noise; oil change with correct grade
- Replace blower resistor and connector
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Inspect, treat or reinforce rear lower link bracketsNo charge if your vehicle is included
- Inspect, treat or reinforce rear lower link bracketNo charge if your vehicle is included
- Timing belt inspection or replacement under campaignNo charge if your vehicle is included
- ABS recall repairNo charge if your vehicle is included
- Inspect and tighten or replace rear link boltsNo charge if your vehicle is included
- Repair engine wiring harness terminalNo charge if your vehicle is included
- Inspect and replace fuel return hoseNo charge if your vehicle is included
- Replace or repair fuel pumpNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.