Your 2013 Jeep Grand Cherokeeproblems, repair costs and recalls
What we've documented about the 2013 Jeep Grand Cherokee: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2013 Jeep Grand Cherokee
5 documented issues apply to 2013, most serious first.
Stalling or no-start from fuel pump relay (recall)
- What you'll notice
- The engine cranks but will not start, or stalls while driving. The horn, wipers or other electrical items may act up, or the fuel pump keeps running.
- Why it happens
- The fuel pump relay inside the main fuse and relay module (TIPM) can fail. Earlier repairs were followed by a later recall.
- What to do
- Check your VIN for recall 19V-813 (and earlier 14V-530 or 15V-115) and have the repair done.
Alternator failure can cause stalling (recall)
- What you'll notice
- A battery or charging warning light, dim lights, electrical glitches, loss of steering assist, or the engine stalling.
- Why it happens
- The alternator can fail suddenly. On some vehicles a failure can also short internally, which is a fire risk.
- What to do
- Check recall status by VIN. Do not ignore a charging light; the vehicle may stall once the battery runs down.
Left cylinder head wear on the 3.6L V6
- What you'll notice
- Check engine light with a misfire (often cylinder 2), a ticking from the driver side of the engine, and rough idle.
- Why it happens
- Valve seats and guides in the left cylinder head on early engines wear too fast. Chrysler extended warranty coverage on that head and released a revised part.
- What to do
- Get misfire codes read promptly. Ask a dealer whether the left head extension applies to your engine.
Oil filter/oil cooler housing leak on the 3.6L V6
- What you'll notice
- A burning oil smell, oil at the back of the engine or on the transmission, a slowly dropping oil level, or coolant loss with no obvious leak.
- Why it happens
- The plastic housing that holds the oil filter and oil cooler sits in the valley of the engine, where heat can crack it or harden its seals.
- What to do
- Have it checked as soon as you smell burning oil. Keep oil and coolant topped up until the housing is replaced.
Ticking from worn rocker arms on the 3.6L V6
- What you'll notice
- A fast tapping or ticking from the top of the engine, sometimes with a rough idle and a misfire code.
- Why it happens
- Rocker arms (cam followers) can wear or fail, and later revised parts have not fully ended the problem.
- What to do
- Have a misfire or new ticking checked early. Running it long can damage the camshaft.
Repair prices for your 2013 Jeep Grand Cherokee
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Install external fuel pump relay and wiring
- Replace left cylinder head
- Replace oil filter housing and oil cooler assembly
- Replace rocker arms and lash adjusters on one cylinder head
- Replace alternator
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…