Kia Tellurideproblems, repair costs and recalls
Problems reported across 2020–2027. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
18 documented issues across all years, most serious first.
Tow hitch wiring module can short and catch fire (recall)
- What you'll notice
- A burning smell or smoke from the rear of the vehicle, possibly while parked and switched off, on models with the factory or dealer tow hitch harness.
- Why it happens
- Moisture and debris can get onto the circuit board in the tow hitch harness module and cause a short.
- What to do
- Park outside and away from buildings until the recall repair is done, and book it with a Kia dealer right away.
Front power seat motor can overheat and catch fire (recall)
- What you'll notice
- A burning smell or smoke from under a front seat, or a seat slide switch that feels stuck.
- Why it happens
- The seat slide knob can stick and keep the motor powered until it overheats. Kia issued a second recall because the first repair did not always solve it.
- What to do
- Park outside and away from buildings until the latest recall repair is completed, even if the earlier repair was already done.
Vehicle can roll away while in Park (recall)
- What you'll notice
- The vehicle creeps or rolls after being shifted into Park, or you hear a grinding noise from the front when pulling away.
- Why it happens
- The right front driveshaft and intermediate shaft may not be fully joined, and the splines can wear until Park no longer holds the wheels.
- What to do
- Always set the parking brake when you park, and have the recall inspection and software update done right away.
Engine valve springs can break (recall)
- What you'll notice
- Sudden loss of power, heavy shaking, loud engine noise, or the engine shutting off while driving.
- Why it happens
- Some valve springs were made incorrectly and can fracture, which can let a valve drop and punch through the engine block.
- What to do
- Check the VIN for the recall. If the engine starts running rough or loses power, pull over safely and have it towed.
Front seat back frames may not hold in a crash (recall)
- What you'll notice
- Usually no symptom; on affected power front seats the seat back might feel loose.
- Why it happens
- A manufacturing error in the front seat back frames means they may not restrain an occupant properly in a collision.
- What to do
- Check the VIN for the recall and have the seat frames inspected as soon as possible.
Seat belts may not hold a child seat tightly (recall)
- What you'll notice
- A child seat installed with the seat belt will not stay snug because the belt does not lock.
- Why it happens
- Some vehicles were built with seat belt assemblies meant for other markets that lack the locking feature used for child seats.
- What to do
- Check the VIN for the recall. Until it is fixed, install child seats with the lower anchors where possible.
Trailer brake lights may not come on with smart cruise control (recall)
- What you'll notice
- When towing with smart cruise control on, the trailer brake lights stay dark as the system slows the vehicle.
- Why it happens
- The wiring does not send a brake light signal to the trailer when the cruise system applies the brakes by itself.
- What to do
- Check the VIN for the recall. Avoid using smart cruise control while towing until the extra harness is installed.
High beam headlights can stop working (recall)
- What you'll notice
- The high beams do not come on, or cut out, while the low beams still work.
- Why it happens
- A fault in the headlight assembly can cause the high beam function to fail.
- What to do
- Check the VIN for the recall and have the headlights inspected soon, especially if you drive on unlit roads.
Front passenger seat may not detect a child seat (recall)
- What you'll notice
- The passenger airbag status light shows the wrong state with a child seat in the front seat.
- Why it happens
- The occupant detection unit in the front passenger seat may not recognise a child restraint correctly.
- What to do
- Check the VIN for the recall. Keep children in the rear seats, which is the safest place in any case.
Instrument cluster screen can stay blank (recall)
- What you'll notice
- The speedometer and warning light display stays dark after you start the vehicle.
- Why it happens
- A software fault, or excess adhesive on the cluster circuit board on some vehicles, can stop the display from starting up.
- What to do
- Check the VIN for the recalls. If the screen is blank, restart the vehicle before driving and have the repair done soon.
Wrong-size spare tire fitted at the factory (recall)
- What you'll notice
- With the spare installed, ABS or traction control warning lights may come on and the car may handle oddly.
- Why it happens
- Some vehicles left the factory with a spare wheel and tire that do not match the size the brake and stability systems expect.
- What to do
- Check the VIN for the recall and have the spare inspected before you need it.
Digital instrument cluster can show nothing at start-up (recall)
- What you'll notice
- The digital gauge display stays blank when you start the vehicle, so speed and warning lights are not visible.
- Why it happens
- A software error can prevent the cluster from loading.
- What to do
- Check the VIN for the recall. If the screen is blank, restart the vehicle before driving and get the software update soon.
Second-row side airbag wiring may be damaged (recall)
- What you'll notice
- The airbag warning light may come on; often there is no symptom at all.
- Why it happens
- The wiring to the second-row side airbags may have been damaged during assembly, so those airbags might not deploy in a crash.
- What to do
- Check the VIN for the recall and have the wiring inspected soon.
Wrong-size spare tire fitted at the factory (recall)
- What you'll notice
- With the spare installed, ABS or traction control warning lights may come on and the car may handle oddly.
- Why it happens
- Some vehicles left the factory with a spare wheel and tire that do not match the size the brake and stability systems expect.
- What to do
- Check the VIN for the recall and have the spare inspected before you need it.
Third-row centre seat belt buckle may not latch (recall)
- What you'll notice
- The third-row middle seat belt will not click in, or pulls back out.
- Why it happens
- The anchor buckle for the third-row centre seat may not latch properly.
- What to do
- Check the VIN for the recall and do not seat anyone in that position until the buckle is replaced.
Driver seat belt can lock and refuse to pull out (recall)
- What you'll notice
- The driver seat belt jams and will not extend far enough to buckle.
- Why it happens
- The emergency locking mechanism in the driver belt retractor can lock when it should not.
- What to do
- Check the VIN for the recall and do not drive unbelted; have the belt assembly replaced first.
Windshield cracks easily
- What you'll notice
- A crack that appears after a small stone strike or with no obvious impact, often spreading quickly.
- Why it happens
- Many owners report the windshield glass on early model years is unusually prone to cracking.
- What to do
- A small chip can wait a short while, but have any crack in your line of sight repaired, and check whether your insurance covers glass.
Door window trim strip can peel and come off (recall)
- What you'll notice
- The bright trim strip along the bottom of the door windows lifts, flaps in the wind, or goes missing.
- Why it happens
- The outer layer of the belt molding can separate from its backing and detach while driving.
- What to do
- Check the VIN for the recall. If a strip is loose, have it replaced soon so it does not fly off on the road.
Repair prices for your Kia Telluride
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Install fuse and harness extension; replace tow hitch harness
- Install electronic fuse assembly for front power seat motors
- Update parking brake software; replace damaged front shafts
- Replace windshield and recalibrate front camera
- Replace incorrect seat belt assemblies
- Install additional wire harness to main fuse box
- Inspect and repair or replace headlight assemblies
- Replace front passenger occupant detection unit
- Update instrument cluster software or replace cluster
- Replace spare wheel and tire assembly
- Update instrument cluster software
- Inspect and replace or secure second-row side airbag harnesses
- Replace door belt molding trim assemblies
- Replace engine sub-assembly
- Inspect and replace front seat back frame assemblies
- Replace third-row centre seat belt anchor buckle
- Replace driver seat belt assembly
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.