Your 1998 Lexus SCproblems, repair costs and recalls
What we've documented about the 1998 Lexus SC: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1998 Lexus SC
10 documented issues apply to 1998, most serious first.
Water pump leak and timing belt due
- What you'll notice
- Coolant drips or crust near the front of the engine, a sweet coolant smell, or a whine from the front of the engine.
- Why it happens
- Both the SC 300's inline-6 and the SC 400's V8 use a timing belt, and the water pump runs behind it. Owners recommend replacing the belt, pump, seals and idlers together around 90,000 miles or if records are missing.
- What to do
- If there are no records of a timing belt change, plan one now along with the water pump and seals. A broken belt leaves you stranded and a leaking pump can overheat the engine.
Automatic transmission or torque converter failing
- What you'll notice
- Slipping, flare between gears, shuddering, or overdrive that stops working.
- Why it happens
- Owners link torque converter and overdrive failures in these older SCs to transmission fluid that was rarely changed, letting worn clutches and contaminated fluid damage the internals.
- What to do
- Check the fluid color and smell. If it is dark or burnt, have a transmission shop diagnose it before doing a big flush, which can sometimes make a worn unit slip more.
Worn front control arm bushings
- What you'll notice
- Squeaks, creaks or clunks from the front over bumps, vague steering, or a shake through the wheel at highway speeds.
- Why it happens
- The rubber bushings in the front control arms dry out and crack with age, letting the arms move more than they should.
- What to do
- Have the front suspension inspected on a lift. Bushings can sometimes be pressed in alone, but many owners replace the complete control arms.
Worn engine and transmission mounts
- What you'll notice
- More vibration at idle, especially in Drive, and a clunk when accelerating, shifting or letting off the gas.
- Why it happens
- The rubber and fluid-filled mounts that hold the engine and transmission break down with age and heat.
- What to do
- Have a shop watch the engine while a helper shifts between Drive and Reverse. Replace mounts that are torn or collapsed.
Power steering pump leaks onto the alternator
- What you'll notice
- Power steering fluid level drops, fluid drips under the front of the car, and the steering may whine. Left alone, the alternator can fail.
- Why it happens
- A seal in the power steering pump wears out. Because the pump sits above the alternator, the leaking fluid soaks it and its wiring.
- What to do
- Check the fluid level and look for wetness around the pump. Reseal or replace the pump soon, and inspect the alternator for fluid damage at the same time.
White smoke on start-up from power steering air valve
- What you'll notice
- A puff of white smoke at start-up, or on acceleration in bad cases, and power steering fluid going missing with no visible leak.
- Why it happens
- The power steering air control valve, which raises idle when you turn the wheel, has internal rubber seals that harden with age. Fluid then gets drawn into the intake and burned.
- What to do
- Check whether the power steering reservoir is dropping. Replacing the air control valve is a simple repair; burning fluid can foul spark plugs and the catalytic converter.
Engine computer capacitors leak, causing stalling
- What you'll notice
- Intermittent loss of throttle or stalling, odd idle, a throttle position code such as P0121, or a scan tool that can't talk to the engine computer.
- Why it happens
- The engine computers of this era use small electrolytic capacitors that dry out or leak with age, corroding the circuit board.
- What to do
- Have a shop check the engine computer and its wiring harness. Rebuilt computers with new capacitors are available and cost far less than a new unit.
Foggy or hazy headlights
- What you'll notice
- Dim headlights, a cloudy outer lens, or moisture and haze inside the lamp.
- Why it happens
- Plastic lenses yellow and haze from sun exposure, and cracked or poorly sealed housings let damp air inside, where it condenses.
- What to do
- Polishing restores a hazy outer lens. If water is inside the lamp, the housing is cracked or the seal has failed and the headlight usually needs replacing.
Gauge needles or climate and radio displays go dark
- What you'll notice
- Gauge needles stop lighting up, or the climate control and radio displays go dim or blank in spots, making them hard to read at night.
- Why it happens
- Small backlight bulbs burn out and the aging circuit boards in the gauge cluster and displays wear out.
- What to do
- Bulbs are cheap if you're comfortable removing panels. Specialist shops can rebuild gauge clusters and displays if the board itself has failed.
Doors sag from worn hinges
- What you'll notice
- The door drops when opened, clunks or has to be lifted to latch, and may rub the body.
- Why it happens
- The SC's long, heavy doors use double-jointed hinges whose pivots wear over time, especially if people lean on an open door.
- What to do
- Have the hinges checked for play. Worn hinges are replaced individually; avoid leaning on or hanging from open doors.
Repair prices for your 1998 Lexus SC
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace timing belt and water pump
- Replace front control arms with new bushings
- Replace engine mount
- Replace power steering pump
- Diagnose engine computer and harness
- Replace headlight assembly
- Replace backlight bulbs or rebuild gauge cluster
- Replace door hinge
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…