Your 2016 Mercedes-Benz Sprinterproblems, repair costs and recalls
What we've documented about the 2016 Mercedes-Benz Sprinter: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2016 Mercedes-Benz Sprinter
12 documented issues apply to 2016, most serious first.
Diesel emissions faults, limp mode and DEF countdown
- What you'll notice
- Emissions or check engine lights, the van dropping into reduced-power limp mode, a countdown of remaining starts, poor fuel economy, hard starting or stalling.
- Why it happens
- The BlueTEC diesel emissions parts (DEF heater and pump, NOx sensors, diesel particulate filter and EGR valve) fail or clog. These years were also part of Mercedes' diesel emissions settlement.
- What to do
- Don't ignore a start countdown; the van will eventually refuse to start. Ask a dealer whether the AEM emissions update has been done, since it comes with extended coverage on the related parts.
Intake swirl flaps stick and cause limp mode
- What you'll notice
- Check engine light with codes such as P2004 or P2007, reduced power, hard starting or stalling.
- Why it happens
- Carbon from the EGR system jams the swirl flaps in the intake manifold, or the flap actuator fails. Long idling makes it worse; it's very common on 2007-2009 vans.
- What to do
- Have the codes read. Sometimes only the actuator needs replacing; otherwise the intake manifold is replaced. Periodic carbon cleaning helps prevent it.
Takata airbag inflator can rupture (recall)
- What you'll notice
- Usually no warning signs.
- Why it happens
- Driver or passenger Takata airbag inflators can break down with age, heat and humidity and burst in a crash.
- What to do
- Check your VIN now. Several recalls (16V-077, 17V-479, 17V-480, 18V-032, 19V-003, 19V-004) cover these vans, and the replacement is free.
Free under the Takata recall. Check the VIN first.
Power steering return hose can slip off (recall)
- What you'll notice
- Sudden heavy steering, a whining power steering pump, and fluid leaking under the van.
- Why it happens
- The power steering return hose can slide off its fitting, dumping fluid and leaving you without steering assist.
- What to do
- Have a dealer fit the new clamps under recalls 20V-663 and 21V-241. Check under the van for fluid in the meantime.
Free under recall 20V-663 or 21V-241. Check the VIN first.
Stability control may be switched off on RV conversions (recall)
- What you'll notice
- ESP or stability warning light, or the system not working on some camper conversions.
- Why it happens
- On some converted vans the stability control unit can be disabled by the wrong rear wheel speed sensor setup.
- What to do
- Have a dealer check recall 21V-042. They replace the rear wheel speed sensor at no cost.
Free under recall 21V-042. The dealer replaces the rear wheel speed sensors.
Airbag control unit missing a reinforcement plate (recall)
- What you'll notice
- No symptoms.
- Why it happens
- The airbag control unit may have been installed without its reinforcement plate and bracket, which can affect how the airbags fire.
- What to do
- Get the free fix under recall 17V-093.
Recall 17V-093. Check the VIN first.
Side windows may come loose in a crash (recall)
- What you'll notice
- No symptoms in normal use.
- Why it happens
- Layered paint under the bonded windows may not let the adhesive hold properly.
- What to do
- Have a dealer check recall 16V-261. They remove the windows, check the paint and reinstall them free.
Driveshaft catch strap is missing (recall)
- What you'll notice
- No symptoms unless the driveshaft breaks.
- Why it happens
- Some vans were built without the strap that holds a broken driveshaft away from the fuel tank.
- What to do
- Get the strap installed free under recalls 17V-094 and 17V-592.
Free under recall 17V-592 (17V-094 for some 2015 vans). Check the VIN first.
Leaking injector seals cause "black death" sludge
- What you'll notice
- Diesel exhaust smell in the cab, a puffing or ticking sound from the top of the engine, rough idle, hard starting or lost power.
- Why it happens
- The copper seals under the fuel injectors wear and let combustion gas escape. Fuel and soot bake into a black tar around the injectors. It's especially common on 2003-2006 vans.
- What to do
- Have it fixed early. A shop pulls the injectors, cleans out the sludge and fits new seals; waiting too long can mean seized injectors.
Engine just clicks and won't crank
- What you'll notice
- You turn the key and hear a click, but the starter doesn't turn. It often starts on the next try.
- Why it happens
- Corroded starter or solenoid contacts, a bad battery cable (the Y-cable on early 2007+ vans), a starter relay or fuse, or a faulty neutral safety switch.
- What to do
- Have the battery cables, relay and starter tested. Cycling between Park and Neutral sometimes gets it started in the meantime.
Intake or intercooler hoses come loose
- What you'll notice
- Check engine light, low power, turbo lag or no boost, a whooshing sound, and sometimes the engine shutting off.
- Why it happens
- Boost hoses between the turbo, intercooler and engine crack or slip off their fittings. Oil on the hoses points to a leak.
- What to do
- Have the hoses checked and a boost leak test done. A loose hose is a quick fix; a split one is a cheap part.
Exhaust flex pipe breaks
- What you'll notice
- A louder exhaust, exhaust or burning smell in the cab, and sometimes lower power.
- Why it happens
- The flexible section of the exhaust cracks, often because of a weak particulate filter bracket. Hot gas can melt nearby wiring and hoses.
- What to do
- Fix it soon to protect nearby wiring. An exhaust shop can weld in a new flex pipe for much less than a dealer exhaust; check whether emissions coverage applies first.
Repair prices for your 2016 Mercedes-Benz Sprinter
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace a failed NOx sensor (common cause; confirm by diagnosis first)
- Remove injector, clean the bore and fit a new copper seal (per injector)
- Clean intake manifolds and replace swirl rods/linkage, or replace manifolds
- Replace starter
- Replace intercooler or boost hose
- Weld in a replacement flex coupling
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…