Your 2006 Mitsubishi Endeavorproblems, repair costs and recalls
What we've documented about the 2006 Mitsubishi Endeavor: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Mitsubishi Endeavor
16 documented issues apply to 2006, most serious first.
Fuel filler pipe rusts and leaks (recall)
- What you'll notice
- A strong gas smell or fuel dripping near the right rear wheel, often while you are filling the tank. A check engine light can also appear.
- Why it happens
- Mud and road salt get trapped against the filler pipe and its bracket and rust through the pipe. Mitsubishi recalled 2004-2010 Endeavors in salt-belt and cold-weather states and extended the pipe warranty elsewhere.
- What to do
- Don't ignore a fuel smell. Ask a Mitsubishi dealer to check your VIN for recall 10V065000; if it is done or doesn't apply, have the pipe inspected and replaced if it leaks.
Free at a Mitsubishi dealer if it was never done. Check your VIN for open recalls.
Automatic transmission flares or shifts harshly
- What you'll notice
- The engine revs briefly between 2nd and 3rd gear, shifts feel harsh or late, or the vehicle shudders or vibrates when shifting into 4th.
- Why it happens
- RepairPal lists a 2-3 shift flare as the most common Endeavor problem and links it to an internal transmission fault. Worn fluid and clutch packs make it worse with age.
- What to do
- Check the transmission fluid level and condition and have codes read. A fluid service and software or valve body repair may help early; slipping that keeps getting worse usually means a rebuild.
Rear subframe rusts and suspension arm breaks loose
- What you'll notice
- Clunking from the rear, a wheel that leans or tucks in, the SUV pulling or wandering, or visible heavy rust under the rear.
- Why it happens
- In salt-belt states the rear subframe and control arm mounts corrode. Owners report the upper A-arm mounting tabs and rear control arms breaking, which can let a rear wheel collapse.
- What to do
- If you live where roads are salted, have the rear subframe and arm mounts inspected every year. Stop driving and tow the vehicle if a rear wheel looks out of line.
Key comes out when shifter isn't in Park (recall)
- What you'll notice
- You can pull the key out even though the shifter is not fully in Park, and the parked SUV can roll away.
- Why it happens
- The ignition key interlock cable can let its cam fall forward, so the lock that holds the key until Park is selected does not work.
- What to do
- Always set the parking brake. Ask a dealer to check for recall 08V139000, which inspects and fixes the interlock for free.
Free at a Mitsubishi dealer if it was never done. Check your VIN for open recalls.
Fuel tank strap bracket can split (recall)
- What you'll notice
- Usually nothing you can notice. In a severe crash the tank could drop and leak fuel.
- Why it happens
- The left rear fuel tank strap bracket may have been stamped incorrectly and can split near a bolt.
- What to do
- Have a Mitsubishi dealer check for recall 08V454000. They inspect the bracket and reinforce it if it is split.
Free at a Mitsubishi dealer if it was never done. Check your VIN for open recalls.
Defroster airflow switches on its own (recall)
- What you'll notice
- Air suddenly moves from the windshield to other vents, or the temperature swings between hot and cold, which can fog the windshield.
- Why it happens
- On models with manual A/C, a faulty control signal can damage the mode door shaft and send air to the wrong vents.
- What to do
- If the windshield fogs, pull over safely. Ask a dealer for recall 10V514000, which inspects and repairs the mode door shaft for free.
Free at a Mitsubishi dealer if it was never done. Check your VIN for open recalls.
Timing belt failure
- What you'll notice
- The engine suddenly stops running and won't restart, or there is ticking or whining from the front of the engine before it fails.
- Why it happens
- The 3.8L V6 uses a rubber timing belt that wears out with age and mileage. Owners report timing belt failures, and others replace the belt and tensioners as maintenance.
- What to do
- Check your records. If the belt has not been changed at the interval in your owner's manual, have the belt, tensioner and idler replaced before it breaks.
Water on the driver's floor from a clogged A/C drain
- What you'll notice
- The carpet on the driver's side (sometimes the passenger side) gets soaked, there is a musty smell, and in bad cases water drips onto the pedals.
- Why it happens
- Condensation from the A/C is supposed to drain out through the firewall. On the Endeavor the drain area clogs with debris and broken-down insulation, or a foam seal fails, so the water backs up into the cabin. Mitsubishi issued several service bulletins with fixes such as a secondary drain or a longer drain tube.
- What to do
- Have the A/C drain cleared and ask the shop to apply the Mitsubishi bulletin fix so it doesn't come back. Dry the carpet and padding fully to stop mold, and check for damp wiring under the carpet.
Rear or side window glass shatters by itself
- What you'll notice
- A loud bang and a side, rear or liftgate window suddenly breaks with no impact, sometimes while closing the liftgate.
- Why it happens
- Owners report tempered glass on the Endeavor shattering on its own, often linked to stress in the glass or a binding window or liftgate.
- What to do
- Cover the opening to keep water out and replace the glass. If a door window keeps having trouble, check the window regulator too.
Interior flooding from blocked body drains
- What you'll notice
- Water pools on the floorboards after rain or car washes, and the carpet stays wet.
- Why it happens
- Drain paths in the body clog, so water that should run out finds its way into the cabin. Owners report it separately from the A/C drain leak.
- What to do
- Have the sunroof, cowl and body drains cleared and the seals checked. Dry the interior quickly to prevent mold and electrical problems.
Failed ignition coil causes rough running
- What you'll notice
- The engine shakes or shudders, runs rough, and the check engine light may flash.
- Why it happens
- An ignition coil can fail and cause a misfire. An owner reported this on a 2006 at high mileage.
- What to do
- Have the misfire code read and the bad coil replaced. Don't drive long with a flashing check engine light, because it can ruin the catalytic converter.
Airbag (SRS) warning light stays on
- What you'll notice
- The SRS airbag light stays on. Some owners report the dealer could not get the part.
- Why it happens
- Faults in the passenger airbag system or its sensors set the light. Owners of 2004, 2007 and 2010 models report it.
- What to do
- Have the SRS codes read. The airbags may not work correctly while the light is on, so get it fixed. A used or rebuilt part may be needed if Mitsubishi no longer sells it.
Check engine light from vacuum leaks
- What you'll notice
- The check engine light comes on. The engine may idle a little rough or unevenly.
- Why it happens
- Cracked or loose vacuum hoses and intake seals let unmeasured air into the engine, which the computer flags. RepairPal lists this as a common Endeavor problem.
- What to do
- Have the codes read and a smoke test done to find the leak. It is usually an inexpensive hose or gasket.
Rear power window falls into the door
- What you'll notice
- A rear window drops into the door and won't go back up, or the motor runs but the glass doesn't move.
- Why it happens
- The window regulator breaks. Mitsubishi also issued service alerts for door glass coming loose from the regulator.
- What to do
- Tape or cover the window and have the regulator replaced. Expect to replace it once rather than repair it.
Exterior door handles snap off
- What you'll notice
- An outside door handle or rear door handle breaks off, and the door won't open from outside.
- Why it happens
- The handles are plastic and owners report them breaking repeatedly.
- What to do
- Replace the handle. Until then, the door can usually be opened from inside.
Sunroof wind noise
- What you'll notice
- A whistling or rushing wind noise from the sunroof, especially at highway speed.
- Why it happens
- The sunroof seal or the glass adjustment lets air leak past at speed. Owners report it even at low mileage.
- What to do
- Ask a shop to adjust the sunroof glass and check the seal. Clean and lubricate the seal as well.
Repair prices for your 2006 Mitsubishi Endeavor
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Clear A/C drain and install bulletin drain fix; dry carpet
- Diagnose and repair or rebuild automatic transmission
- Smoke test and replace leaking vacuum hose or gasket
- Replace rear subframe or rusted control arms and mounts
- Replace side or liftgate glass
- Replace rear window regulator
- Clear body and sunroof drains; dry and clean interior
- Replace timing belt, tensioner and idler
- Replace ignition coil
- Diagnose SRS fault and replace failed sensor or module
- Replace exterior door handle
- Adjust sunroof glass and replace seal
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace fuel filler pipeNo charge if your vehicle is included
- Inspect and correct ignition key interlockNo charge if your vehicle is included
- Inspect and reinforce fuel tank strap bracketNo charge if your vehicle is included
- Inspect and repair HVAC mode door shaftNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…