Scion iM / Corolla iMproblems, repair costs and recalls
Problems reported across 2016–2018. Pick your model year below to see what applies to your vehicle.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
12 documented issues across all years, most serious first.
CVT can wear and lose speed (service campaign JSD)
- What you'll notice
- Check engine light, and the car may lose speed and only drive up to about 37 mph. Some owners noticed harsh shifts or odd engine revs.
- Why it happens
- Toyota found the CVT control software could make a part inside the transmission cycle more than needed and wear early. Its free campaign updates the software, checks the CVT solenoid, and replaces the valve body or whole CVT if needed.
- What to do
- Give your VIN to a Toyota dealer and ask whether campaign JSD (which replaced J0D) was done. If the check engine light is on with CVT symptoms, get it checked before long drives.
Free at a Toyota dealer under the campaign. If code P2820 is stored, the campaign covers a new CVT; Toyota also set up a process for out-of-warranty cars.
CVT hesitation, slipping or sudden loss of power
- What you'll notice
- A delay of a second or two when pulling away, engine revs flaring before the car picks up speed, a sudden RPM drop at highway speed, or loss of power while accelerating.
- Why it happens
- Owners report slow response and slipping from the CVT. Some cases trace to the software and wear problem fixed by Toyota's CVT campaign; others need the transmission repaired or replaced.
- What to do
- If the car loses power in traffic, move to a safe spot and get it checked soon. Ask a Toyota dealer to check for campaign JSD and stored transmission codes first.
Check engine light with code P2820
- What you'll notice
- Check engine light with code P2820 (CVT pressure control solenoid). The car may lose speed.
- Why it happens
- Toyota updated the engine computer logic to stop this fault. Under the CVT campaign, cars that already have P2820 get a new transmission.
- What to do
- Have the code read at a Toyota dealer and ask about bulletin S-SB-0002-18 and campaign JSD. Avoid long trips until it's checked.
High-pitched whine from the CVT once warmed up
- What you'll notice
- A high hiss or whine from the transmission that shows up after the car reaches normal temperature.
- Why it happens
- Toyota traced it to a plate in the CVT's valve body. Bulletins cover the 2016 Scion iM and 2017–2018 Corolla iM.
- What to do
- Not an emergency, but have a Toyota dealer confirm it and check the CVT serial number against the bulletin. Mention bulletin S-SB-0001-19 or T-SB-0016-19.
Water on the floor from a clogged A/C drain
- What you'll notice
- Wet carpet on the passenger side, or water dripping under the dash when the A/C runs.
- Why it happens
- The tube that drains condensation from the A/C can clog, so water backs up into the cabin.
- What to do
- Have the drain cleared and dry the carpet fully to prevent mold and musty smells.
Musty smell after water gets inside
- What you'll notice
- A damp, musty or moldy smell in the cabin, often after a leak or wet carpet.
- Why it happens
- Water that gets under the carpet soaks the padding and sound deadener. Toyota has a bulletin covering the iM that explains how to find the leak and clean up the floor.
- What to do
- Find and fix the water leak first. Then ask a dealer about bulletin T-SB-0094-21; the cleanup involves removing seats and carpet.
Horn stops working (steering wheel spiral cable)
- What you'll notice
- The horn works only some of the time, then stops completely. Steering wheel buttons may act up too.
- Why it happens
- The spiral cable (clock spring) behind the steering wheel carries power to the horn and airbag. Owners report it failing.
- What to do
- Get it fixed soon; a working horn is a safety item. Have the airbag light checked at the same time.
Pre-collision system warning or several warning lights at once
- What you'll notice
- A pre-collision system malfunction message, sometimes with headlight, ABS, brake or traction control warnings.
- Why it happens
- Owners report the forward camera system and related warnings acting up, sometimes after brake or front-end work. A sensor, wiring fault or camera aim problem can set them off.
- What to do
- Treat the safety systems as off until it's checked. Have the codes read; the camera may need recalibration after windshield or front-end work.
Check engine light with code P2610
- What you'll notice
- Check engine light with code P2610 (engine-off timer). The car usually drives normally.
- Why it happens
- An engine computer logic issue can set this code. Toyota released updated software.
- What to do
- Not urgent. Ask a Toyota dealer to check for bulletin S-SB-0001-18 and update the software.
Front brakes grind or groan
- What you'll notice
- A grinding or groaning sound from the front when you press the brakes, even with plenty of pad left.
- Why it happens
- Toyota released an updated front brake pad kit for this noise.
- What to do
- Have the brakes inspected so a real problem isn't missed, and ask for the updated pads from bulletin S-SB-0002-19.
Wrong load capacity label (recall)
- What you'll notice
- No symptom. The door-jamb label may list too high a carrying capacity.
- Why it happens
- The label didn't account for the weight of dealer-installed accessories, so the car could be overloaded.
- What to do
- Check with a Toyota dealer whether recall 16V236 was done; a corrected label is free.
Free. Check your VIN.
Spare tire may be underinflated (recall)
- What you'll notice
- No warning. The temporary spare may be low on air when you need it.
- Why it happens
- Some cars sold through Gulf States Toyota had spare tires that weren't filled to the pressure on the tire label.
- What to do
- Check the spare's pressure yourself, and ask a Toyota dealer whether recall 17V295 applies to your car.
Free. Check your VIN.
Repair prices for your Scion iM / Corolla iM
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace CVT assembly
- Replace CVT valve body (bulletin S-SB-0001-19 / T-SB-0016-19)
- Reprogram engine/transmission computer
- Reprogram engine computer (bulletin S-SB-0001-18)
- Install updated front brake pad kit
- Clear clogged A/C drain tube
- Replace steering wheel spiral cable
- Diagnose warning lights
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- CVT software update and inspection (campaign JSD)No charge if your vehicle is included
- Install corrected load label (recall 16V236)No charge if your vehicle is included
- Inspect and inflate spare tire (recall 17V295)No charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.