Your 2013 Subaru BRZproblems, repair costs and recalls
What we've documented about the 2013 Subaru BRZ: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2013 Subaru BRZ
12 documented issues apply to 2013, most serious first.
Valve springs can break and stall the engine (recall)
- What you'll notice
- A ticking or tapping from the engine, rough running, a flashing check engine light, or the engine stalling while you drive.
- Why it happens
- Some 2013 cars got valve springs that can crack. A broken spring lets a valve misbehave, which can make the engine run badly or quit.
- What to do
- Check your VIN for the recall. The dealer replaces the valve springs for free. If the engine stalls or knocks, stop and have it towed.
Engine knock or failure after the valve spring recall repair
- What you'll notice
- Knocking, vibration, loss of power or a seized engine, often some time after the valve spring recall was done.
- Why it happens
- The recall job means taking the top of the engine apart. Dozens of owners told NHTSA their engines knocked or failed afterward, and some were refused help by the dealer or Subaru.
- What to do
- If knocking starts after the recall, stop driving and go back to the dealer that did the work. Keep the repair order, and contact Subaru of America in writing if you are refused.
Engine knock, stalling or sudden engine failure
- What you'll notice
- A rattle or knock from the engine, stalling at idle or at a light, a flashing check engine light, or the engine seizing.
- Why it happens
- Owners report broken valve springs and rocker arms on cars outside the recall, and engines that seized at higher mileage. Running low on oil makes it worse.
- What to do
- Check the oil level often, since these engines can use some. If it knocks or the check engine light flashes, stop driving and have it towed for diagnosis.
Manual transmission noise, grinding or hard shifting
- What you'll notice
- Rattling or metal-on-metal noise from the gearbox, grinding when shifting, or gears that are hard to get into.
- Why it happens
- Owners of manual cars report gearbox faults, some at very low mileage, and some needing a whole new transmission. TrueDelta owners also report transmission replacements.
- What to do
- Have it checked while still under warranty if you can. Make sure the gear oil is the correct type and level.
Rough idle or stalling with cam timing codes
- What you'll notice
- The idle speed hunts up and down, the car shudders or stalls as you stop, and the check engine light shows cam timing codes (P0016 to P0019).
- Why it happens
- The engine's variable valve timing (AVCS) parts on early cars were built to loose tolerances, and a faulty cam sprocket can also cause it. Subaru released new software and parts through service bulletins.
- What to do
- Have the codes read and ask the dealer about the AVCS service bulletins. A software update or a new cam sprocket or oil control valve usually fixes it.
Clutch release bearing noise or clutch failure
- What you'll notice
- A chirp, whine or grinding noise that changes when you press the clutch pedal, a soft pedal, or a burning smell and slipping.
- Why it happens
- The clutch release (throwout) bearing is a known weak spot on these cars, and clutches can wear early with hard driving.
- What to do
- Have the clutch inspected if it is noisy or slips. The bearing is usually replaced along with the clutch, since the gearbox has to come out for either.
Oil leaks onto the exhaust
- What you'll notice
- A burning-oil smell while driving, oily spots under the car, or light smoke from the engine bay.
- Why it happens
- Oil can seep from engine seals and covers and drip onto the hot exhaust. Subaru has a service bulletin on finding and fixing oil seepage on these engines.
- What to do
- Have the leak found and fixed soon, since oil on the exhaust is a fire risk. Ask the dealer about the oil seepage bulletin.
Chirping or cricket noise from the fuel pump
- What you'll notice
- A chirp or cricket-like ticking from the engine bay, often more noticeable when the engine is warm.
- Why it happens
- The high-pressure fuel pump for the direct injection makes this noise. Subaru issued a service bulletin about it, and many owners report it.
- What to do
- It is usually harmless. Ask the dealer about the high-pressure fuel pump bulletin if the noise bothers you.
Water or condensation in the tail lights
- What you'll notice
- Fog or water droplets inside the tail lights, sometimes enough to dim the brake lights.
- Why it happens
- The tail light housings can let water in. It is the most common problem in TrueDelta's owner survey.
- What to do
- Have the lights replaced under warranty if possible. Make sure the brake lights work, since water can short them.
Rearview mirror shakes or falls off
- What you'll notice
- The inside mirror vibrates so you can't see clearly, or the mount breaks and the mirror drops off the windshield.
- Why it happens
- The mirror mount, especially on cars with the heavier HomeLink mirror, can come loose from the glass.
- What to do
- Have the mount re-glued or replaced. Don't drive without a working mirror.
Power window switch stops working
- What you'll notice
- A window won't go up or down, or works only some of the time.
- Why it happens
- The window switches wear out. Window seals and regulators also show up in owner surveys.
- What to do
- Try the window from the other switch to narrow it down, then replace the faulty switch or regulator.
Fuel pump clicks off early when filling up
- What you'll notice
- The gas station nozzle keeps shutting off almost right away, making the tank hard to fill.
- Why it happens
- An owner reports the filler hose may collapse or the tank vent may not breathe well, so the nozzle senses a full tank too soon.
- What to do
- Try filling slowly with the nozzle at a different angle. If it keeps happening, have the filler neck and EVAP vent checked.
Repair prices for your 2013 Subaru BRZ
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine with a used or rebuilt unit
- Replace cam timing (AVCS) oil control solenoid
- Replace manual transmission
- Replace clutch kit and release bearing
- Inspect high-pressure fuel pump per service bulletin
- Find and repair engine oil leak
- Replace tail light assembly
- Re-bond or replace rearview mirror mount
- Replace power window switch or regulator
- Diagnose and repair fuel filler neck or EVAP vent
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace valve springs under recallNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…