Your 2004 Suzuki Forenzaproblems, repair costs and recalls
What we've documented about the 2004 Suzuki Forenza: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2004 Suzuki Forenza
12 documented issues apply to 2004, most serious first.
Head gasket failure and overheating
- What you'll notice
- The temperature gauge climbs, coolant keeps disappearing, white exhaust smoke, or a rough-running engine.
- Why it happens
- Head gasket failures are among the most reported Forenza engine problems, usually at 80,000-100,000 miles, and often show up after an overheating episode.
- What to do
- If the engine overheats, pull over and shut it off right away. Have a cooling system pressure test and a combustion leak test done before the engine is damaged further.
Timing belt breaks and damages the engine
- What you'll notice
- The engine suddenly quits while driving and then cranks but will not start.
- Why it happens
- The 2.0L engine uses a rubber timing belt and is an interference design, so when the belt breaks the valves and pistons collide. Owners report belts breaking and needing head rebuilds or a replacement engine; a failing water pump can take the belt with it.
- What to do
- If you do not have a record of a timing belt change, have the belt and water pump replaced now. If the belt has already broken, do not keep cranking the engine; have a shop check for valve damage.
Headlight switch or DRL module can overheat (recall)
- What you'll notice
- Headlights or daytime running lights act up, a hot or burning-plastic smell near the left side of the steering column, or a melted switch.
- Why it happens
- Heat builds up in the headlight switch or the daytime running light module, which can melt the part and create a fire risk.
- What to do
- Check your VIN for this recall. Suzuki dealers replace the switch, add a relay kit and replace the DRL module free. If you smell burning plastic, stop and turn the car off.
Headlights cut out from melted wiring splice (recall)
- What you'll notice
- Low beams, high beams or daytime running lights flicker or stop working.
- Why it happens
- A poor connection in a wiring splice pack for the headlight power circuit heats up and melts. Suzuki recalled the cars twice for this, once in 2007 and again in 2012.
- What to do
- Check your VIN for both recalls; the repair is free. Do not drive at night without working headlights.
Brake lights may stay on (recall)
- What you'll notice
- The brake lights stay on when you are not braking, the battery runs down, or cruise control acts up.
- Why it happens
- A faulty brake light switch can keep the brake lights on all the time, so drivers behind you cannot tell when you brake.
- What to do
- Check your VIN for the recall; the switch repair is free. Have someone confirm your brake lights work normally.
If the recall is closed, a switch is a relatively inexpensive shop repair.
Driver airbag may deploy improperly (recall)
- What you'll notice
- Usually no warning. The airbag light may come on.
- Why it happens
- Suzuki recalled some early Forenzas because the driver airbag might not deploy correctly in a frontal crash.
- What to do
- Confirm with a Suzuki dealer that this recall was completed on your car.
Airbag warning light stays on
- What you'll notice
- The airbag light stays on or keeps coming back after it is reset.
- Why it happens
- Owners report faults in the airbag control module, the passenger seat occupant sensor and wiring under the seats.
- What to do
- While this light is on the airbags may not work. Have the airbag codes read by a shop with the right scan tool.
Clutch slave cylinder fails
- What you'll notice
- The clutch pedal goes soft or to the floor and you cannot shift gears.
- Why it happens
- On manual cars the hydraulic slave cylinder that releases the clutch can leak or fail. Owners report costly repairs.
- What to do
- Have the clutch hydraulics checked. Replacing the clutch at the same time can save labor if it is worn.
Check engine light from oxygen sensor (P0133)
- What you'll notice
- Check engine light on with code P0133.
- Why it happens
- The upstream oxygen sensor slows down with age and the engine computer flags it.
- What to do
- Have the code confirmed. Replacing the sensor usually clears it.
Valve cover gasket oil leak
- What you'll notice
- Oil seeping on top of the engine, or a burning-oil smell after driving.
- Why it happens
- The rubber valve cover gasket hardens and leaks oil.
- What to do
- Replace the gasket before oil reaches the spark plug wells or hot exhaust.
Inside door handles break or lose paint
- What you'll notice
- Interior door handles pop off or break, or the paint peels off the handles.
- Why it happens
- Owners report weak door handle parts and finishes that wear quickly.
- What to do
- Replace a broken handle soon; a door that cannot be opened from inside is a problem in an emergency.
Radio display stops working
- What you'll notice
- The radio display goes blank or stops working.
- Why it happens
- The display on the factory radio fails on some cars.
- What to do
- A shop or car audio installer can repair or replace the radio.
Repair prices for your 2004 Suzuki Forenza
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace head gasket
- Replace timing belt (preventive)
- Replace airbag control module
- Replace clutch and slave cylinder
- Replace upstream oxygen sensor
- Replace valve cover gasket
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace headlight switch and DRL moduleNo charge if your vehicle is included
- Repair headlight wiring spliceNo charge if your vehicle is included
- Replace brake light switchNo charge if your vehicle is included
- Driver airbag recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…