Toyota Crownproblems, repair costs and recalls
Problems reported across 2023–2025. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
14 documented issues across all years, most serious first.
Speedometer and warning lights may not show at startup (recall)
- What you'll notice
- When you start the car, the instrument display may not show your speed, the brake system warning light or the tire pressure warning light.
- Why it happens
- A software error at startup can keep the instrument panel from displaying this information. Toyota recall 25V-595 covers the Crown along with many other Toyota and Lexus models.
- What to do
- If the gauges are blank or missing after startup, don't drive until they come back. Check your VIN for open recalls; the fix is a free software update, done over the air or at a dealer.
Backup camera may freeze or go blank (recall)
- What you'll notice
- When you shift into reverse, the camera picture freezes or the screen stays blank.
- Why it happens
- A software error in the parking assist system can freeze the rearview image. Recall 25V-744 covers cars with the panoramic view monitor across many 2022-2026 Toyota, Lexus and Subaru models.
- What to do
- Until it is fixed, check mirrors and look over your shoulder when backing up, and don't rely on the screen. Check your VIN for open recalls; the dealer updates the software for free.
Wiring chewed by rodents
- What you'll notice
- Sudden warning lights, check engine light, or features that stop working, often after the car has been parked for a while. Chewed wires, nesting or droppings under the hood.
- Why it happens
- Mice and rats can nest in the engine bay and chew through wires. Crown owners have reported this on very low-mileage cars, with expensive repair bills, and warranty does not cover animal damage.
- What to do
- Don't drive if warnings for brakes, steering or the hybrid system are on. Have a shop inspect the wiring, and ask your insurer, since comprehensive coverage often pays for animal damage. Rodent-deterrent tape or traps can help prevent repeat damage.
Front or rear camera can short out from water inside (recall)
- What you'll notice
- The rear or front camera image is blank, blurry or distorted.
- Why it happens
- Weak laser welds on the camera housings can let water in and short the camera. Recall 24V-442 covers about 13,000 2023 Crowns.
- What to do
- Use your mirrors and check around the car until it is fixed. Check your VIN for open recalls; the dealer inspects and replaces the cameras for free.
Shudder or vibration at low speed (Hybrid MAX)
- What you'll notice
- A vibration or shudder from the transmission when creeping in Drive or Reverse below about 8 mph, while the gas engine is running. The check engine light may come on with code P0840.
- Why it happens
- Toyota issued service bulletins for this on some 2023 Crown Platinum (Hybrid MAX) cars. Some cars need a new transmission and transmission control module.
- What to do
- Have a Toyota dealer check it under warranty and ask about bulletins T-SB-0001-24 and T-TT-0740-23. Write down when it happens so the dealer can reproduce it.
Hesitation or delay when pulling away from a stop
- What you'll notice
- When you press the gas from a stop or at low speed, the car is slow to respond or pauses for a moment before it accelerates. This can feel unsafe when pulling into traffic.
- Why it happens
- Owners of 2023-2025 Crowns have filed several complaints with NHTSA about this. Dealers often could not reproduce it, and Toyota has not published a cause.
- What to do
- Leave extra room when pulling into traffic until it is checked. Report it to a Toyota dealer under warranty and note when it happens (cold engine, after braking, uphill). You can also file a complaint with NHTSA.
Low oil pressure warning and milky oil after short trips in the cold
- What you'll notice
- An Oil Pressure Low message and check engine light (codes such as P0520 or P0524), and oil on the dipstick or under the filler cap that looks milky or tan.
- Why it happens
- On short trips in very cold weather, moisture from the engine condenses in the oil instead of burning off. If it freezes, oil pressure can drop. Toyota issued a service bulletin for this on the 2.5L hybrid engine.
- What to do
- If the oil pressure warning comes on, stop safely and turn off the engine. Have a Toyota dealer inspect it under warranty and ask about bulletin TSB010421. Longer drives now and then help clear moisture from the oil.
Hybrid system warning light in freezing weather
- What you'll notice
- The hybrid system warning comes on when it is below freezing, often at startup. Codes P1C84 or P3004 may be stored.
- Why it happens
- Toyota issued a service bulletin for a false high-voltage circuit fault that can be set in temperatures below 32°F on some 2016-2023 hybrids.
- What to do
- If the car won't go into Ready or drives poorly, don't keep driving; call for help. Otherwise have a Toyota dealer read the codes under warranty and ask about bulletin TSB008523A.
Check engine light for a crankcase vent hose code (P2C90)
- What you'll notice
- The check engine light comes on with code P2C90, saying a crankcase ventilation hose is disconnected, even though the hoses are fine.
- Why it happens
- Toyota found the engine computer could set this code falsely and released updated software in a service bulletin.
- What to do
- Have the hoses checked. If they are connected, ask a Toyota dealer for the software update in bulletin TSB010123 under warranty.
Check engine light for a turbo wastegate code (P0243)
- What you'll notice
- The check engine light comes on with code P0243, for the turbocharger wastegate solenoid circuit.
- Why it happens
- Toyota issued a service bulletin with updated engine computer software to reduce this code on 2023 Crowns. Only the Hybrid MAX engine has a turbo.
- What to do
- Have the code read. If power feels normal it is not an emergency, but book a dealer visit for the software update in bulletin TSB009123.
Heater blows cool after a hot restart
- What you'll notice
- Right after restarting a warm car, the heater blows lukewarm or cool air until the gas engine kicks in.
- Why it happens
- The hybrid system can stay in electric mode after a restart, so little engine heat reaches the heater. Toyota changed the engine computer logic in a service bulletin.
- What to do
- If it bothers you or the windows fog, ask a Toyota dealer for the software update in bulletin T-SB-0014-24. Use the defroster setting to clear fogged glass.
Rocker or door molding coming loose
- What you'll notice
- The trim strip along the bottom of the doors pulls away from the body, flaps or rattles at highway speed, or comes off.
- Why it happens
- The molding is held on by clips that can let go. Owners report it on new cars, and a dealer said it had seen similar complaints.
- What to do
- Push it back in place if it's only partly loose, and have a dealer re-secure it under warranty before it comes off on the road.
CarPlay, multimedia or connected-services glitches
- What you'll notice
- Apple CarPlay drops navigation or calls, the multimedia screen won't load your profile, or app and remote features don't work.
- Why it happens
- Toyota issued bulletins for multimedia profile problems and connected-services faults on the 2023 Crown, and owners of later years report CarPlay dropouts.
- What to do
- Restart the system and your phone, try another cable, and install any available software updates. If it continues, ask a dealer about the latest multimedia software.
Load capacity label may show wrong numbers (recall)
- What you'll notice
- No symptom. The label showing how much extra weight the car can carry may be wrong on cars with dealer-installed accessories.
- Why it happens
- Gulf States Toyota recall 24V-548 covers cars with its accessories whose load labels show inaccurate weight values, which could lead to overloading.
- What to do
- Check your VIN for open recalls; a correct label is mailed for free. Don't overload the car in the meantime.
Repair prices for your Toyota Crown
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Oil and filter change (per Toyota bulletin T-SB-0104-21)
- Replace hybrid battery relay box (per Toyota bulletin T-SB-0085-23)
- Engine computer software update
- Repair or replace damaged wiring harness sections
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Instrument panel software updateNo charge if your vehicle is included
- Parking assist software updateNo charge if your vehicle is included
- Inspect and replace front and rear camerasNo charge if your vehicle is included
- Replacement load capacity label (mailed)No charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.