Home › Code lookup › P0202
Powertrain code · Fuel and air

P0202 Injector Circuit/Open - Cylinder 2

How urgent? Get it checked in the next few days

What it means

The engine computer sees a problem in the wiring or electrical signal for the fuel injector on cylinder 2, so that cylinder may not be getting fuel.

Can I keep driving?

Limit driving. A dead cylinder 2 injector causes a misfire that can overheat the catalytic converter. If the check engine light flashes, the engine shakes, loses power or stalls, slow down and get it checked right away. If it runs smoothly, get it to a shop in the next few days.

What to test before replacing parts

Check the cylinder 2 injector connector and resistance, then check power and the control signal with a noid light or scope before replacing the injector or the computer.

  1. Look for a loose, broken or corroded connector at the cylinder 2 injector
  2. Measure the injector's resistance and compare it with the other injectors
  3. Use a noid light or scope to confirm the computer is pulsing the injector

Signs you may notice

  • Check engine light on
  • Rough idle or shaking
  • Misfire or stumble, often with a cylinder 2 misfire code
  • Less power and worse fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel injector on cylinder 2 (open or shorted coil)
  • CommonLoose, damaged or corroded injector connector
  • PossibleBroken or chafed injector wire in the harness
  • PossibleBlown fuse or lost power feed to the injectors
  • PossibleFaulty injector driver inside the engine computer

Typical repair once the cause is confirmed

Usually a new cylinder 2 injector or a wiring or connector repair. The engine computer itself is rarely the cause.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel injector (cylinder 2). Prepare an itemized shop request.
Walk through it step by step: Engine sputters or misfires →

Common questions

What does P0202 mean?

The engine computer sees a problem in the wiring or electrical signal for the fuel injector on cylinder 2, so that cylinder may not be getting fuel.

Can I drive with code P0202?

Limit driving. A dead cylinder 2 injector causes a misfire that can overheat the catalytic converter. If the check engine light flashes, the engine shakes, loses power or stalls, slow down and get it checked right away. If it runs smoothly, get it to a shop in the next few days.

What causes P0202?

Common possibilities to test include: faulty fuel injector on cylinder 2 (open or shorted coil); loose, damaged or corroded injector connector; broken or chafed injector wire in the harness; blown fuse or lost power feed to the injectors. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.