Home › Code lookup › P0502
Powertrain code · Transmission

P0502 Vehicle Speed Sensor "A" Circuit Low Input

How urgent? Get it checked in the next few days

What it means

The signal from the vehicle speed sensor is lower than it should ever be, which usually points to a wiring short or a failed sensor. This part tells the computer how fast the car is moving.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the wiring and connector for rubbing, damage or corrosion
  2. Check reference voltage and ground at the connector with a meter

Signs you may notice

  • Check engine light on
  • Speedometer erratic or not working
  • Harsh or odd automatic shifting

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSignal wire shorted to ground
  • CommonFaulty vehicle speed sensor
  • PossibleCorroded or water-damaged connector
  • PossibleProblem with the sensor's reference voltage supply

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new vehicle speed sensor if it tests bad.

Walk through it step by step: Harsh or late shifting →

Common questions

What does P0502 mean?

The signal from the vehicle speed sensor is lower than it should ever be, which usually points to a wiring short or a failed sensor. This part tells the computer how fast the car is moving.

Can I drive with code P0502?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0502?

Common possibilities to test include: signal wire shorted to ground; faulty vehicle speed sensor; corroded or water-damaged connector; problem with the sensor's reference voltage supply. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.