Home › Code lookup › P050B
Powertrain code · Emissions

P050B Cold Start Ignition Timing Performance

How urgent? Book a check when convenient

What it means

On a cold start the computer delays spark timing to warm the catalytic converter, and it could not hold the timing where it wanted.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for other idle, misfire or knock codes and fix those first
  2. Look for a manufacturer service bulletin or software update

Signs you may notice

  • Check engine light on
  • Possible rough idle right after a cold start

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDirty throttle body or vacuum leak upsetting idle control
  • PossibleEngine misfire
  • PossibleKnock sensor input pulling timing
  • PossibleEngine computer software needing an update

Typical repair once the cause is confirmed

Fix any idle air or misfire problem first; some models need a computer update.

Walk through it step by step: Check engine light on →

Common questions

What does P050B mean?

On a cold start the computer delays spark timing to warm the catalytic converter, and it could not hold the timing where it wanted.

Can I drive with code P050B?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P050B?

Common possibilities to test include: dirty throttle body or vacuum leak upsetting idle control; engine misfire; knock sensor input pulling timing; engine computer software needing an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.