P2340 Cylinder 5 Above Knock Threshold
What it means
The knock sensor has picked up strong knocking (pinging) from cylinder 5. Knocking is fuel burning at the wrong time and can damage the engine if it keeps happening.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Fill up with the fuel octane your owner's manual calls for
- Check for cooling, lean-running or other engine codes
Signs you may notice
- Check engine light on
- Pinging or knocking sound when accelerating
- Loss of power as the computer pulls back timing
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLow-octane or poor-quality fuel
- CommonCarbon buildup in the cylinder
- PossibleEngine running hot or lean
- PossibleWrong spark plugs or a faulty knock sensor
- PossibleInternal engine noise mistaken for knock
Typical repair once the cause is confirmed
Use the right fuel and fix any overheating or lean condition; carbon cleaning or sensor replacement may be needed.
Common questions
What does P2340 mean?
The knock sensor has picked up strong knocking (pinging) from cylinder 5. Knocking is fuel burning at the wrong time and can damage the engine if it keeps happening.
Can I drive with code P2340?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2340?
Common possibilities to test include: low-octane or poor-quality fuel; carbon buildup in the cylinder; engine running hot or lean; wrong spark plugs or a faulty knock sensor. A shop should confirm the cause before replacing parts.