Home › Code lookup › U0001
Network code · Network

U0001 High Speed CAN Communication Bus

How urgent? Get it checked in the next few days

What it means

There is a problem on the high speed CAN network, the wiring network the car's computers use to talk to each other.

Can I keep driving?

Use care. Lost communication between modules can affect gauges, brakes, steering assist or the transmission. If several warnings come on, the brakes or steering feel different, or it stalls, don't keep driving; have it towed. Otherwise go straight to a shop soon.

What to test before replacing parts

Check battery voltage and grounds, test the network wiring for shorts or opens, and unplug modules one at a time to find the one pulling the network down before replacing any module.

  1. Test the battery and charging voltage
  2. Check network resistance at the diagnostic port (about 60 ohms on most high speed CAN networks)
  3. Unplug modules one at a time to find one shorting the network
  4. Inspect wiring in areas that see water, heat or movement

Signs you may notice

  • Several warning lights on at once
  • Some gauges or features may stop working
  • Car may not start in some cases

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged, chafed or corroded network wiring
  • CommonLoose or corroded connector at a module
  • CommonA failed module dragging the network down
  • PossibleWater getting into a connector
  • PossibleLow battery voltage

Typical repair once the cause is confirmed

Find and repair the damaged network wire or connector, or replace the module that is shorting the network.

Repair costInsufficient verified pricing for this vehicle and repair
Repair network wiring or connector. Prepare an itemized shop request.

Where it shows up

  • Often appears with many other U codes after water damage or a wiring repair
Walk through it step by step: Many dashboard lights on at once →

Common questions

What does U0001 mean?

There is a problem on the high speed CAN network, the wiring network the car's computers use to talk to each other.

Can I drive with code U0001?

Use care. Lost communication between modules can affect gauges, brakes, steering assist or the transmission. If several warnings come on, the brakes or steering feel different, or it stalls, don't keep driving; have it towed. Otherwise go straight to a shop soon.

What causes U0001?

Common possibilities to test include: damaged, chafed or corroded network wiring; loose or corroded connector at a module; a failed module dragging the network down; water getting into a connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.