Home › Code lookup › U0305
Network code · Network

U0305 Software Incompatibility With Cruise Control Module

How urgent? Book a check when convenient

What it means

The software in the cruise control module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Ask whether any module was recently replaced or reprogrammed
  2. Check the module part number and software level against the maker data
  3. Keep a battery maintainer connected during any reprogramming

Signs you may notice

  • Driver assist feature may be turned off
  • Warning message on the dash

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonModule replaced with a used or wrong part number
  • CommonModule not programmed, or programmed with the wrong software
  • PossibleSoftware update interrupted, for example by low battery voltage
  • PossibleOther modules need updating to match

Typical repair once the cause is confirmed

Program the module with the correct software using dealer-level tools.

Common questions

What does U0305 mean?

The software in the cruise control module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.

Can I drive with code U0305?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0305?

Common possibilities to test include: module replaced with a used or wrong part number; module not programmed, or programmed with the wrong software; software update interrupted, for example by low battery voltage; other modules need updating to match. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.