Why does my car start and then die right away?
A car that fires up and then dies is getting enough battery power and fuel to start, but something is cutting it off or can't keep it running. How long it runs and what you see on the dash narrow it down quickly. Answer the questions below to find the likely cause and the safest next step.
- If you smell raw fuel, stop trying to start it and keep sparks and flames away.
- If it also stalls while you're driving, don't drive it. You can lose power steering and brake assist in traffic.
- Don't keep restarting it over and over. Give it a minute between tries.
How does it die?
Full guide: every possible outcome
Prefer to read it all? Here's every result this guide can reach.
Stalling while driving is a safety problem. Don't drive it until it's fixedStop — don't drive it
What to do now: Park it and have it towed to a shop, or have a mobile mechanic come to you.
Why: When the engine dies on the road, power steering and brake assist go with it, making the car much harder to steer and stop. The same fault that kills it at startup is now happening at speed.
Possible causes: Failing fuel pump or fuel pump relay; Failing crankshaft position sensor; Dirty throttle body or idle control fault.
A shop will usually test: Code scan and live data; Fuel pressure test; Crank sensor signal test.
The anti-theft system may be shutting the engine offSafe to check yourself first
What to do now: Try your spare key. For push-button start, hold the key fob right against the Start button, or put it where your owner's manual says, while you press Start.
Why: Many cars let the engine fire for a second or two and then cut fuel if they don't recognize the key. A flashing key or security light right when it dies is a strong clue.
Possible causes: Weak key fob battery; Damaged or unprogrammed key; Immobilizer system fault.
A shop will usually test: Immobilizer code scan; Key reprogramming or replacement.
Possible fuel leak. Stop trying to start itStop — don't drive it
What to do now: Don't try to start it again. Keep sparks and flames away and have the car towed.
Why: A raw fuel smell or wet spot often means fuel is getting somewhere it shouldn't. A leak can also drop fuel pressure, which makes the engine die, and fuel near hot parts is a fire risk.
Possible causes: Leaking fuel line or fitting; Leaking fuel injector seal or fuel rail; Flooded engine from repeated tries.
A shop will usually test: Fuel leak inspection; Fuel pressure and leak-down test.
It may not be getting enough fuel, or the fuel may be badBook a check when convenient
What to do now: If the tank is low, add several gallons and try again. If it started right after a fill-up, note where you bought the fuel and book a check.
Why: An engine can start on the fuel already in the lines and then die when the supply can't keep up. A nearly empty tank, a weak pump or water or the wrong fuel in the tank can all do this.
Possible causes: Very low fuel; Weak fuel pump or clogged fuel filter; Water or the wrong fuel in the tank.
A shop will usually test: Fuel pressure and volume test; Fuel sample check for water or contamination; Fuel filter inspection.
The engine may not be getting enough air to idle on its ownBook a check when convenient
What to do now: Book a check soon. If you need to restart it, a light foot on the gas for a few seconds may help it settle, but don't rely on that if it's dying at stops.
Why: When a little gas pedal keeps it running, the engine may need more air at idle than it's getting. Carbon buildup in the throttle body or a sticking idle control part are common reasons, and a shop will usually check the codes and idle data before cleaning or replacing parts.
Possible causes: Dirty throttle body; Faulty idle air control valve (older cars); Mass airflow sensor reading wrong.
A shop will usually test: Code scan and idle data; Throttle body inspection and cleaning; Airflow sensor test.
The engine computer may need to relearn its idleSafe to check yourself first
What to do now: Start the car and let it idle with everything off (A/C, lights, radio) for about 10 minutes. Check your owner's manual for an idle relearn procedure.
Why: On many cars, disconnecting the battery erases the learned idle settings. Until the computer relearns them, the engine may start and then stumble or die.
Possible causes: Lost idle settings after battery work; Loose battery clamp.
A shop will usually test: Idle relearn with a scan tool; Code scan.
A sensor or engine fault is possible. The stored code is the best clueBook a check when convenient
What to do now: Have the trouble codes read. Many parts stores do this free, or book a shop check soon.
Why: The engine computer relies on sensors to set fuel and air at startup. If one reads wrong, the engine can fire up and then die, and the computer often stores a code that points a shop toward what to test.
Possible causes: Mass airflow sensor fault; Crankshaft or camshaft position sensor; Vacuum leak.
A shop will usually test: Code scan and live sensor data; Airflow sensor test; Smoke test for vacuum leaks.
Cold-start stalling often points to idle control or a sensor reading wrongBook a check when convenient
What to do now: Let it idle for 30 seconds before driving off on cold mornings, and book a check when convenient.
Why: A cold engine needs extra fuel and a higher idle. If the coolant temperature sensor gives the computer the wrong reading, or the idle system is dirty, the engine can die until it warms up.
Possible causes: Dirty throttle body or idle control fault; Faulty coolant temperature sensor; Vacuum leak.
A shop will usually test: Code scan and live sensor data; Throttle body cleaning; Smoke test for vacuum leaks.
A vacuum leak may be letting in extra airBook a check when convenient
What to do now: Book a check when convenient. Mention the hissing or surging idle so the shop can test for leaks.
Why: The engine computer measures the air coming in and adds fuel to match. A cracked hose or leaking gasket lets in air it doesn't know about, so the mixture runs too lean to idle and the engine surges or dies.
Possible causes: Cracked or disconnected vacuum hose; Leaking intake gasket or air intake boot; Faulty PCV valve or hose.
A shop will usually test: Smoke test for vacuum leaks; Code scan and fuel trim data.
The idle may be too low to handle extra loadBook a check when convenient
What to do now: Book an inspection soon. Until it's checked, keep your foot lightly on the gas when you shift into gear.
Why: Shifting into gear or turning on the A/C adds load to the engine. If the idle control can't raise engine speed to match, the engine stumbles and dies.
Possible causes: Dirty throttle body or idle control fault; Vacuum leak; Torque converter clutch not releasing (automatic).
A shop will usually test: Code scan; Idle control test; Transmission lockup check.
It needs a quick shop diagnosis to pin downBook a check when convenient
What to do now: Have the trouble codes read, then book a check. Until then, avoid relying on the car for important trips.
Why: Starting and then dying means the battery and starter are doing their job, but fuel, air or the security system isn't keeping the engine running. A few quick tests usually separate these.
Possible causes: Idle control or throttle body problem; Fuel delivery problem; Security system cutting the engine.
A shop will usually test: Code scan; Fuel pressure test; Idle and throttle body inspection.
Related guides
Sources and references: National Highway Traffic Safety Administration (NHTSA) · AA1Car