Home › Symptom guides › Tires wearing unevenly
Driving & handling

Why are my tires wearing unevenly?

The way a tire wears is a record of how it's been running. Edge wear, center wear, one-sided wear and choppy patches each point to a different cause, from tire pressure to alignment to worn suspension parts. Answer a few questions to narrow down the likely cause and how urgent it is.

Stop and get help right away if:
  • If you can see fabric or steel cords, or a bulge on any tire, don't drive on it. Use the spare or call for help.
  • If the tread is worn down to the wear bars, replace the tire soon. Grip in rain and snow drops sharply.
  • If you hear clunking from the front end and the steering feels loose, have it checked before driving at speed.
Question 1

Look at the most worn part of the tread. What do you see?

Wear bars are small raised bridges in the bottom of the tread grooves. When the tread is level with them, the tire is worn out. A quick check: put a penny in the shallowest groove with Lincoln's head down. If you can see all of his head, the tread is too low.

Full guide: every possible outcome

Prefer to read it all? Here's every result this guide can reach.

The tire is worn through. Don't drive on itStop — don't drive it

What to do now: Don't drive on this tire. Put on the spare or call roadside assistance, then replace the tire.

Why: Once the cords show, there's almost nothing left between the air inside and the road. The tire can burst or lose air suddenly, especially at highway speed or in heat.

Possible causes: Alignment problem left too long; Tire simply worn out; Long-term low pressure.

A shop will usually test: Tire replacement; Wheel alignment check; Steering and suspension inspection.

The tire is at or near the end of its lifeGet it checked in the next few days

What to do now: Plan to replace the tire within a few days. Drive gently, leave extra following distance, and avoid heavy rain or snow if you can.

Why: Tread grooves push water out from under the tire. When the tread gets this low, the tire can skim over water and stopping distances get much longer on wet roads. In many places a tire this worn may also fail inspection.

Possible causes: Normal wear plus an underlying problem; Tires simply due for replacement.

A shop will usually test: Tread depth measurement; Wheel alignment check; Suspension inspection.

Edge wear on both sides often points to low tire pressureSafe to check yourself first

What to do now: Check the pressure in all four tires when cold and set them to the number on the driver's door sticker. Recheck monthly.

Why: When a tire is low, its center sags inward and the edges carry the weight. The edges wear faster, the tire runs hotter and fuel economy drops.

Possible causes: Tire pressure regularly too low; Slow leak in that tire; Frequent heavy loads.

A shop will usually test: Leak test; Tire pressure sensor check.

Center wear often points to tires that are overinflatedSafe to check yourself first

What to do now: Set the tires to the pressure on the driver's door sticker, not the maximum pressure printed on the tire.

Why: Too much air makes the center of the tread bulge slightly and carry most of the weight. The center wears out first, and the tire grips less because less rubber touches the road.

Possible causes: Tires filled to the sidewall maximum; Tire and wheel width mismatch.

A shop will usually test: Tire size and wheel fitment check.

One-edge wear often points to the wheel alignmentBook a check when convenient

What to do now: Book a wheel alignment and ask the shop to check the suspension parts first. Rotate or replace the worn tires as advised.

Why: If a wheel leans in or out at the top, more weight rides on one edge of the tread and it wears faster. Alignment can drift from potholes and age, and worn parts can make it change while driving.

Possible causes: Camber out of spec (wheel tilted in or out); Bent suspension part from an impact; Lowered or lifted suspension.

A shop will usually test: Four-wheel alignment check with printout; Suspension and steering parts inspection; Check for bent parts.

Feathered wear often points to the toe settingBook a check when convenient

What to do now: Book a wheel alignment, and ask the shop to check the tie rod ends for wear before aligning.

Why: Toe is whether the wheels point straight ahead or slightly in or out. When they point the wrong way, the tire scrubs sideways as it rolls, leaving ridges across the tread. It can wear a tire out fast.

Possible causes: Toe out of adjustment; Worn tie rod ends; Bent steering part from an impact.

A shop will usually test: Wheel alignment with printout; Tie rod end inspection; Steering parts inspection.

Worn steering or suspension parts may be causing the wearStop — don't drive it

What to do now: Don't rely on the car until the steering and suspension have been inspected. A badly worn ball joint or tie rod end can come apart with little warning. Have it towed, or ask a mobile mechanic to check it where it's parked.

Why: Loose ball joints, tie rods or bushings let the wheel shift while driving, so the alignment keeps changing and the tire wears unevenly. An alignment may not hold with worn parts, so a shop will usually check each joint for play first and align after any repairs.

Possible causes: Worn ball joint; Worn tie rod end; Worn control arm bushings.

A shop will usually test: Steering and suspension inspection with the wheels lifted; Ball joint and tie rod play check; Alignment after repairs.

Cupping often points to worn shocks or struts, or wheel balanceBook a check when convenient

What to do now: Book an inspection of the shocks, struts and wheel balance, and ask whether the tires can be rotated or need replacing.

Why: When shocks or struts are worn, or a wheel is out of balance, the tire bounces slightly as it rolls and scuffs the road in spots. That leaves a pattern of dips, and usually a humming noise that gets louder with speed.

Possible causes: Worn shocks or struts; Wheel out of balance; Loose wheel bearing or suspension parts.

A shop will usually test: Shock and strut inspection; Wheel balance check; Wheel bearing and suspension check.

A single flat spot often comes from a skid or a sticking brakeBook a check when convenient

What to do now: Have the tire and the brake on that wheel checked when convenient.

Why: A tire that slides without rolling scrubs off rubber in one spot. That happens in a hard skid, or when a brake grabs or doesn't release fully. A car that sits for weeks can also get a temporary flat spot that smooths out after driving.

Possible causes: Skid from hard braking or a locked wheel; Sticking brake caliper or parking brake; Tire out of round or damaged.

A shop will usually test: Brake inspection; Tire runout and balance check.

This looks like normal front-versus-rear wear that rotation can help even outSafe to check yourself first

What to do now: Have the tires rotated on the schedule in your owner's manual and keep the pressures set to the door sticker.

Why: Front tires do most of the steering and, on front-wheel-drive cars, most of the pulling. They naturally wear faster than the rears. Rotating them regularly spreads the wear so all four last longer.

Possible causes: Tires not rotated regularly; Front-wheel or rear-wheel drive wear pattern.

A shop will usually test: Tire rotation; Alignment check if wear is fast.

A tire shop can read the wear pattern for youBook a check when convenient

What to do now: Check the tire pressures today, then book a tire and alignment inspection.

Why: Uneven wear usually comes from tire pressure, alignment, or worn suspension parts. A technician can measure the tread across each tire and narrow it down quickly.

Possible causes: Incorrect tire pressure; Wheel alignment off; Worn suspension or steering parts.

A shop will usually test: Tread depth measurement across each tire; Alignment check; Suspension inspection.

Related guides

Sources and references: National Highway Traffic Safety Administration (NHTSA) · U.S. Tire Manufacturers Association

This guide helps you understand what may be going on and how urgent it is. It doesn't replace an in-person inspection.