Your 2017 Acura RL / RLXproblems, repair costs and recalls
What we've documented about the 2017 Acura RL / RLX: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2017 Acura RL / RLX
5 documented issues apply to 2017, most serious first.
Moaning or rubbing noise from the rear while steering
- What you'll notice
- A moan, groan or rubbing sound from the back of the car when driving straight or making small steering corrections.
- Why it happens
- Acura traced it to manufacturing errors in rear steering and suspension parts and issued a service bulletin and a warranty extension.
- What to do
- Ask an Acura dealer whether your car is covered by the warranty extension before paying for any repair.
Covered by an Acura warranty extension; out-of-coverage repairs vary widely.
Torque converter shudder at 20-60 mph
- What you'll notice
- A vibration or shudder like rumble strips when cruising at roughly 20 to 60 mph.
- Why it happens
- The torque converter lock-up clutch can judder as the transmission fluid ages. Acura's bulletins call for updated software and fresh fluid, and warn the shudder can return if the fluid breaks down again.
- What to do
- Ask a dealer about the transmission software update and a fluid change before anyone replaces the torque converter.
Check engine light for misfire or lean codes
- What you'll notice
- The check engine light comes on, sometimes with a rough idle or hesitation. A scan shows misfire codes (P030X) or lean codes (P0171, P0174).
- Why it happens
- Acura opened a technical investigation into certain 2016-2020 MDX, RLX and TLX V6 models with these codes.
- What to do
- Have the codes read and ask the dealer whether your car is part of Acura's investigation or any related campaign before replacing parts.
Flashing D indicator and rough shifting
- What you'll notice
- The D or D4 indicator flashes, the check engine light comes on, the transmission shifts roughly, or more than one gear light shows at once.
- Why it happens
- A fault in the transmission range sensor (code P26C3), sometimes caused by debris, can confuse the transmission computer. RepairPal also lists rough shifting with a flashing D4 light for these years.
- What to do
- Have the codes read promptly. A dealer can check the range sensor under the related bulletin before any major transmission work.
Chirp from the timing belt area after warm-up
- What you'll notice
- A chirping or squeaking noise from the front of the engine once it is warm.
- Why it happens
- Acura says the timing belt can rub against the back edge of the crankshaft pulley.
- What to do
- Ask the dealer about the timing belt chirp bulletin. Have it looked at during your next service so it is not confused with a failing belt or pulley.
Repair prices for your 2017 Acura RL / RLX
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Transmission software update and fluid replacement
- Inspect and service timing belt area per bulletin
- Diagnose misfire or lean condition
- Replace transmission range sensor
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Repair rear steering/suspension per bulletinNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…