Your 2011 BMW X6problems, repair costs and recalls
What we've documented about the 2011 BMW X6: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2011 BMW X6
8 documented issues apply to 2011, most serious first.
V8 timing chain and guide wear
- What you'll notice
- A rattle on cold start that fades as the engine warms, then timing-related check engine codes. Left alone, the chain can jump and badly damage the engine.
- Why it happens
- The twin-turbo V8 puts its turbos inside the V, which cooks the oil and the plastic chain guides. Guides wear and the chain stretches, faster with long oil change intervals. BMW's N63 Customer Care Package addressed early engines.
- What to do
- Have a BMW specialist inspect the chain around 80,000 miles or at any cold-start rattle. Ask a dealer whether the Customer Care Package was done on your VIN, and change the oil about every 5,000–7,500 miles.
V8 burns oil and smokes on startup
- What you'll notice
- Blue-gray smoke from the exhaust right after starting, especially after the car sits overnight, low oil warnings between services, and a burning oil smell.
- Why it happens
- Extreme heat in the V8 hardens the valve stem seals and wears piston rings, and faulty crankcase vent parts add to it. Burning about a quart every 1,000–1,500 miles is common on higher-mileage engines.
- What to do
- Check the oil every fill-up and keep it topped up. Have a shop confirm the cause; valve stem seals are the usual fix, but a worn engine may need more.
Auxiliary water pump can overheat and start a fire (recalls)
- What you'll notice
- Often no warning. Some owners notice a burning smell or smoke from the engine bay, even with the car off.
- Why it happens
- The circuit board in the electric auxiliary water pump that cools the turbochargers can overheat and smolder.
- What to do
- Check your VIN for recalls 11V-521 and 18V-248 and get the free pump replacement. Until then, park outdoors and away from buildings.
Free under recalls 11V-521 and 18V-248.
Passenger front airbag inflator can rupture (recalls)
- What you'll notice
- No symptoms before a crash.
- Why it happens
- Takata-type passenger airbag inflators break down with heat and humidity and can burst in a crash, spraying metal fragments. NHTSA lists several of these as do-not-drive recalls.
- What to do
- Ask the dealer to check your VIN for open recalls now. If recall 16V-364, 17V-020, 18V-030, 19V-017 or 20V-016 is open, do not drive the car until the free repair is done.
Free under recalls 16V-364, 17V-020, 18V-030, 19V-017 and 20V-016.
Driver front airbag inflator can rupture (recalls)
- What you'll notice
- No symptoms before a crash.
- Why it happens
- The driver airbag inflator, including some interim replacement inflators, can degrade and burst in a crash.
- What to do
- Check your VIN for recalls 16V-071 and 20V-017 and get the free airbag replacement right away.
Free under recalls 16V-071 and 20V-017.
Fuel pump wiring can fail and leak fuel (recall)
- What you'll notice
- The engine stalls or will not start, or you smell fuel.
- Why it happens
- The wire contacts inside the in-tank fuel pump module may not be crimped well enough, which can cut power to the pump or let fuel leak.
- What to do
- Check your VIN for recall 16V-746 and get the free fuel pump module replacement.
Free under recall 16V-746.
Front driveshaft joint can fail (recalls)
- What you'll notice
- A clunk or vibration from under the front of the car, or a sudden loss of drive to the front wheels.
- Why it happens
- The universal joint on the front driveshaft may not seal out water and dirt, so it corrodes and fails.
- What to do
- Check your VIN for recalls 16V-311 and 17V-138 and get the free driveshaft replacement.
Free under recalls 16V-311 and 17V-138.
Transfer case and actuator wear
- What you'll notice
- 4WD or xDrive warning light, a whir or grind under load, and binding or hesitation in tight, slow turns.
- Why it happens
- The all-wheel-drive transfer case's clutch pack wears and its small actuator motor fails with mileage. Mismatched tire sizes or worn tires make it worse.
- What to do
- Have the transfer case fluid and actuator checked first. An actuator alone costs far less than a new transfer case, so get a second opinion before a full replacement.
Repair prices for your 2011 BMW X6
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace timing chains, guides and tensioners (V8)
- Replace transfer case (actuator-only repair costs much less)
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…