Your 1997 Buick LeSabreproblems, repair costs and recalls
What we've documented about the 1997 Buick LeSabre: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1997 Buick LeSabre
6 documented issues apply to 1997, most serious first.
Lower intake manifold gasket leaks coolant
- What you'll notice
- Coolant level keeps dropping with no obvious puddle, a sweet smell, a rough idle or misfire, the temperature gauge creeping up, or oil that looks milky or like chocolate milk on the dipstick.
- Why it happens
- The original plastic-framed gaskets under the intake manifold on the 3800 V6 break down over time, partly from old Dex-Cool coolant. Coolant then seeps into the engine valley or straight into the oil, where it destroys the bearings if left alone.
- What to do
- If coolant keeps disappearing, have a shop pressure-test the cooling system and check the oil for coolant. Replace the gaskets with the updated metal-framed type and change the oil and coolant at the same time. Do not keep driving if the oil looks milky.
Plastic upper intake manifold cracks and leaks coolant
- What you'll notice
- Coolant leaking or crusting near the throttle body at the top of the engine, coolant loss with no outside leak, white exhaust smoke, or overheating.
- Why it happens
- The upper intake (plenum) is made of plastic. Coolant runs through it, and the hot EGR passage next to it slowly eats away the plastic until it cracks or the coolant passage leaks, sometimes into the engine.
- What to do
- Get unexplained coolant loss checked soon. Coolant pulled into the cylinders can bend engine parts. The fix is GM's revised upper intake and gasket kit, often done together with the lower intake gaskets.
Automatic transmission slips or loses gears
- What you'll notice
- Engine revs flare between shifts, the car feels like it is in neutral for a moment, a gear is missing, or the transmission goes into a limp mode and stays in one gear.
- Why it happens
- The 4-speed automatic wears internally with age and mileage. GM bulletins describe burnt fourth-gear clutches, slipping and shift shudder, as well as valve body problems that cause loss of drive.
- What to do
- Check the fluid level and color first. Burnt-smelling or dark fluid is a bad sign. Have the codes read and get a transmission diagnosis before it fails fully, since driving on a slipping transmission makes the damage worse.
Harsh or erratic shifting from a failing pressure control solenoid
- What you'll notice
- Hard, banging shifts or soft and slipping shifts, often with a check engine light and codes like P1811 or P0748.
- Why it happens
- The electronic pressure control solenoid inside the transmission sets how firmly each gear engages. When it wears out, line pressure becomes wrong and shifts become harsh or slip.
- What to do
- Have the codes read. If the solenoid is at fault it can be replaced through the transmission side cover without removing the transmission, which costs far less than a rebuild.
Oil leak from the oil pan or rear main seal
- What you'll notice
- Oil spots under the car, oil on the bottom of the engine or where the engine meets the transmission, and a burning-oil smell.
- Why it happens
- GM issued bulletins for repeat oil pan gasket leaks and released a new rear main seal for the 3800 V6.
- What to do
- Keep an eye on the oil level. A shop can clean the area and find the exact leak before replacing a gasket.
Rust on the rocker panels
- What you'll notice
- Bubbling paint or rust along the rocker panels below the doors.
- Why it happens
- GM issued a service alert about rocker panel corrosion on these LeSabres.
- What to do
- Wash salt off the underside in winter and treat surface rust early. Have deep rust checked by a body shop.
Repair prices for your 1997 Buick LeSabre
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace lower intake manifold gaskets, flush coolant and change oil
- Replace upper intake manifold (plenum) and gasket, refill coolant
- Replace automatic transmission with a remanufactured unit
- Replace transmission pressure control solenoid
- Replace oil pan gasket
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…