Home › Chevrolet › Metro › 2000
My vehicle

Your 2000 Chevrolet Metroproblems, repair costs and recalls

What we've documented about the 2000 Chevrolet Metro: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 2000163 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 3,000–5,000 miles
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–50,000 miles
Price not verified
Ask for an estimate
Rear brake shoes and drumsAbout every 50,000–80,000 miles
Price not verified
Ask for an estimate
12V battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plugs (3 or 4) and wiresAbout every 30,000 miles · These engines are sensitive to worn plugs and wires; use the plug type listed for your engine.
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 2–5 years
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2000 Chevrolet Metro

16 documented issues apply to 2000, most serious first.

Stop soon1996–2001Engine

Engine stalls or dies while driving

What you'll notice
The engine cuts out while driving or stalls when slowing down or stopping, and may be hard to restart.
Why it happens
Stalling while driving is the top engine complaint for these years. Owners and mechanics point to a misadjusted or failing throttle position sensor, idle problems, or fuel delivery faults.
What to do
Have the codes read and the throttle position sensor, idle setting and fuel pressure checked. Stalling in traffic is dangerous, so don't put it off.
Repair costInsufficient verified pricing for this vehicle and repair
Walk through this symptom: Engine stalls while driving →
Stop soon1996–2001Engine

Crankshaft pulley bolt loosens or breaks

What you'll notice
A wobble or knock from the front of the engine, belts squealing or coming off, loss of power, or the engine shutting off.
Why it happens
The bolt that holds the crankshaft pulley (harmonic balancer) can back out or break. A loose pulley can wear through the timing belt cover and damage the timing belt.
What to do
If you hear a new knock or see the pulley wobble, stop driving and have it checked. Fixing it early avoids timing belt and engine damage.
Repair costInsufficient verified pricing for this vehicle and repair
Replace crankshaft pulley (harmonic balancer) and bolt. Prepare an itemized shop request.
Stop soon1996–2000Engine1.0L 3-cylinder

Head gasket leak on the 1.0L

What you'll notice
Coolant loss, overheating, white exhaust smoke, or an oil level that rises because coolant is getting into it.
Why it happens
A failing head gasket lets coolant leak into the oil or cylinders. Overheating makes it more likely.
What to do
Stop driving if it overheats or the oil looks milky. A head gasket job usually includes resurfacing the head and a new timing belt.
Get checked1996–2001Engine

Misfires and stumbling from worn ignition parts

What you'll notice
Misfires, stuttering on acceleration, rough running, stalling or a no-start, sometimes worse in rain.
Why it happens
These small engines are sensitive to worn spark plugs and plug wires. Moisture in the distributor cap or wires can also cause misfires.
What to do
Replace plugs, wires, cap and rotor with parts made for this engine. It is a cheap first step for most running problems.
Repair costInsufficient verified pricing for this vehicle and repair
Replace ignition control module. Prepare an itemized shop request.
Walk through this symptom: Engine sputters or misfires →
Get checked1996–2001Electrical

Cranks but won't start from failed distributor pickup

What you'll notice
The engine turns over normally but won't start, or it fires briefly and then loses spark.
Why it happens
The pickup or module inside the distributor can fail and stop the spark. Owners report cranking with no start at high mileage.
What to do
Have a shop check for spark while cranking. If spark is missing, the distributor or its pickup is a common fix.
Repair costInsufficient verified pricing for this vehicle and repair
Replace ignition control module or distributor pickup. Prepare an itemized shop request.
Walk through this symptom: Car won't start →
Get checked1996–2001Engine

Timing belt tensioner noise

What you'll notice
A whirring or chirping from the timing belt area at the front of the engine.
Why it happens
The timing belt tensioner pulley bearing wears. The belt and tensioner are usually replaced together.
What to do
Have the timing belt and tensioner inspected and replace them if worn or due. Follow the mileage interval in the owner's manual.
Repair costInsufficient verified pricing for this vehicle and repair
Replace timing belt and tensioner. Prepare an itemized shop request.
Get checked1996–2001Drivetrain

Front CV axles wear out

What you'll notice
Clicking when turning, a torn rubber boot with grease thrown around the wheel, or vibration when accelerating.
Why it happens
Front axle failures are among the most reported Metro problems, often around 95,000 miles. A torn boot lets dirt into the joint.
What to do
Have the CV boots checked at oil changes. Replacing a boot early is cheaper than an axle.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front CV axle (one side). Prepare an itemized shop request.
Get checked1996–2001Suspension

Front struts wear out

What you'll notice
A bouncy, floaty ride at highway speeds, nose-diving when braking, or uneven tire wear.
Why it happens
RepairPal lists worn front struts, around 75,000 miles, as the most common Metro problem.
What to do
Have the struts and mounts inspected. Replace them in pairs and get an alignment.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front struts (pair). Prepare an itemized shop request.
Walk through this symptom: Bouncy ride →
Get checked1996–2001Transmission

Manual clutch slips

What you'll notice
The engine revs but the car doesn't speed up, especially going uphill, or the car hesitates and jerks between shifts.
Why it happens
The clutch cable needs adjustment as the clutch wears. Once the adjustment is used up, the clutch disc is worn out.
What to do
Have the clutch pedal free play adjusted. If there is no adjustment left, the clutch needs replacing.
Repair costInsufficient verified pricing for this vehicle and repair
Adjust clutch cable free play. Prepare an itemized shop request.
Walk through this symptom: Clutch slipping →
Get checked1996–2001Cooling

Water pump leaks at high mileage

What you'll notice
Coolant drips near the front of the engine, the coolant level drops, or the engine runs hot.
Why it happens
The water pump seal wears and starts to leak at high mileage. It sits behind the timing belt.
What to do
Watch the coolant level. Replace the water pump when the timing belt is done to save labor.
Repair costInsufficient verified pricing for this vehicle and repair
Monitor1996–2001Engine

Rough idle from leaking throttle body gasket

What you'll notice
Uneven or high idle, or stumbling when you press the gas.
Why it happens
The throttle body gasket can leak air, letting unmeasured air into the engine.
What to do
Have a shop smoke-test for vacuum leaks. Replacing the gasket is inexpensive.
Repair costInsufficient verified pricing for this vehicle and repair
Vacuum leak diagnosis and throttle body gasket. Prepare an itemized shop request.
Walk through this symptom: Rough idle or shaking when stopped →
Monitor1996–2000Engine1.0L 3-cylinder

Engine clatters until warm on the 1.0L

What you'll notice
A rattling or clattering from the engine on cold starts that quiets down once warm.
Why it happens
Owners describe this as normal wear on the three-cylinder engine, most often from worn pistons and bearings.
What to do
Check the oil level and use the correct oil. If the noise stays when warm or gets louder, have it checked.
Monitor1996–2001Engine

Drive belt squeals on cold mornings

What you'll notice
A squeal from the engine at startup in cold weather, worse with the lights, heater and radio on.
Why it happens
The alternator and water pump belt slips when it is loose or glazed.
What to do
Tighten the belt to spec or replace it. Don't over-tighten it, which can wear out the water pump bearing.
Repair costInsufficient verified pricing for this vehicle and repair
Replace and tension the drive belt. Prepare an itemized shop request.
Walk through this symptom: Engine squeals on startup →
Monitor1996–2001Emissions

Check engine light from loose or worn gas cap

What you'll notice
The check engine light comes on with no change in how the car drives.
Why it happens
A gas cap that doesn't seal sets an evaporative emissions code.
What to do
Tighten the cap until it clicks. If the light stays on after a few drives, replace the cap and have the codes read.
Repair costInsufficient verified pricing for this vehicle and repair
Check engine light diagnosis. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Monitor1996–2001Fuel

Loses power with a full tank on automatics

What you'll notice
The car feels sluggish or idles high, mainly right after filling the tank.
Why it happens
A blocked vent hose between the fuel tank and the charcoal canister can keep the tank from venting properly.
What to do
Have the tank vent hose and charcoal canister checked for blockage.
Walk through this symptom: Car has no power when accelerating →
Monitor1996–2001Electrical

Headlights go out while other lights work

What you'll notice
The headlights stop working while the taillights or other lights still work.
Why it happens
A loose or corroded ground wire from the light assemblies or between the battery and body is a common cause.
What to do
Have the ground wires and connectors cleaned and tightened before replacing switches or bulbs.
Price guide

Repair prices for your 2000 Chevrolet Metro

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Stalling diagnosis
  • Replace ignition control module
  • Replace ignition control module or distributor pickup
  • Vacuum leak diagnosis and throttle body gasket
  • Replace crankshaft pulley (harmonic balancer) and bolt
  • Replace timing belt and tensioner
  • Replace and tension the drive belt
  • Replace front CV axle (one side)
  • Replace front struts (pair)
  • Check engine light diagnosis
  • Adjust clutch cable free play
  • Replace water pump
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2000 Chevrolet Metro
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2000 Chevrolet Metro as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.